Stone-coated steel is one of the best roofs you can put on a house in hail country. It’s still not hail-proof. After a big storm, I get calls from Keller homeowners with DECRA, Gerard or Unified Steel and TEK roofs who all ask the same thing: “It didn’t leak. Is anything actually wrong with it?”
I’m Blake Snow. I’ve been roofing for 30 years, and we install and repair stone-coated steel across Keller, Roanoke and Southlake. Here’s how I look at hail on these roofs, and how a repair actually gets done.
Recent hail near Keller
NOAA’s Storm Prediction Center logged a 1-inch hail report near Park Vista Blvd, about 3 miles northwest of Keller, on Aug. 26, 2026, and 1-inch (quarter-size) hail near Keller Smithfield Rd on Sept. 21, 2026. Our Aug. 26 hail post has the details. You can look up your own address in NOAA’s Storm Events Database.
What hail does to stone-coated steel
| What you see | What it usually means | Typical fix |
|---|---|---|
| Small spots where the stone chips are gone | Chip loss; the base coat may be exposed | Touch-up kit, if the damage is small enough |
| Lots of bare spots on one panel | More chip loss than a touch-up can blend | Replace the panel |
| Dents in the panel face | Steel deformed by impact | Cosmetic or functional, depending on whether it still sheds water and holds its fasteners |
| Bent panel noses, lifted side laps | Water can get behind the panel | Replace or re-set the panel |
| Dented ridge, hip or rake trim | Trim can open up at laps | Replace the trim piece |
| Damaged pipe jacks, vents, flashings | The leak points on most roofs | Repair or replace those parts |
Granule loss isn’t always storm damage. DECRA’s homeowner manual says some loose granules fall off over time and minor granule loss is normal. It lists installation, walking on the roof, and hail or storm debris as common causes. So I look for a pattern: fresh, sharp-edged impact marks spread across exposed slopes point to hail. A few bare spots along a walking path point to foot traffic.
Touch-up or new panels?
DECRA’s homeowner manual gives a clear rule: chip loss can be fixed with a touch-up kit if the total damage on a panel is less than 10 inches in diameter. Beyond that, DECRA suggests replacing the material. A touch-up is roofing-grade base coat with matching stone chips pressed in. It seals the steel and blends at normal viewing distance. Up close you can usually still find it.
When a panel needs to be replaced, it comes out as a whole panel, not a single “tile.” On batten-installed profiles, that means carefully lifting or removing the overlapping panels around it, setting the new panel, and fastening everything back with the manufacturer’s approved fasteners. Done right, you can’t tell where the work was. Done carelessly, a repair crew can damage more panels than the hail did.
Inspections shouldn’t add damage
This is the part most people miss. DECRA publishes walking instructions with a marked “stepping zone” for each profile (Tile, Villa Tile, Shake, Shake XD and Shingle XD). It says to avoid walking on the side laps and recommends soft-soled shoes. DECRA’s warranty also excludes damage caused by improper foot traffic.
So before anyone climbs up, we fly the roof with a drone, add thermal imaging, and photograph every slope. When someone does need to walk it, we follow the manufacturer’s stepping zones. If an adjuster’s inspection is scheduled, ask them to do the same.
Cosmetic vs. functional damage in Texas
Your policy may draw a line between them.
In 1998, the Texas Department of Insurance adopted Endorsement HO-145, Exclusion of Cosmetic Damage to Roof Coverings Caused by Hail, for homes receiving a credit for an impact-resistant roof. Under that form:
- Not covered: damage that only changes the roof’s appearance
- Still covered: hail damage that lets water through the roof covering, or that keeps the roof from doing its job of keeping out the elements over time
- The endorsement is void unless the insured signed it (or the insurer keeps a signed copy on file)
Many insurers now use their own wording, so pull your declarations page and endorsements and read them. If your policy has a cosmetic exclusion, the inspection report needs to show functional problems clearly: lifted laps, broken seals at flashings, bent noses, exposed steel and leaks, not just dents. If it doesn’t, dents and chip loss across a slope may be covered damage. That’s between you and your insurer, and I won’t promise an outcome.
Warranty vs. insurance
Manufacturer warranties are not storm coverage. DECRA’s Lifetime Limited Warranty covers hailstone penetration of 2.5 inches or less completely through the panels when it results from a manufacturing defect. It also requires warranty claims within 30 days of discovery, with photos. Dents and chip loss from a storm go through your homeowners insurance. In Texas you generally have 1 year from the date of loss to file, but check your policy.
Matching older panels
Stone colors weather, and profiles change. DECRA’s warranty says when it replaces panels, it will try to match color and design but doesn’t guarantee that the same panels will be available. On older Gerard roofs it gets harder: Westlake Royal’s Unified Steel bulletin lists several discontinued Gerard panels whose replacements are a different size. Our Gerard and Unified Steel repair-matching guide walks through it.
My rules on matching:
- Identify the brand and profile before ordering anything
- Pull a panel from a hidden slope to compare color in daylight
- Put new panels on a less visible slope and move salvaged ones to the front when that helps
- If you have spare panels from the original job, keep them
Keep copper and lead off it
When a pipe jack or flashing gets replaced after hail, the metal matters. DECRA warns against copper-based cleaning products because of galvanic corrosion, and the Unified Steel spec says not to use lead or copper with its aluminum-zinc coated steel. We use flashings and boots that are compatible with the panel coating.
Keller permits
The City of Keller’s building FAQ lists roof repairs on residences, not including decking, as exempt from permits. A full re-roof or work that touches the decking is a different story. When the scope is close, we confirm with Keller Building Services before we start.
Repair or re-roof?
- Repair when damage is spread over a few panels and trims and the roof is otherwise sound
- Replace slopes when chip loss or dents are widespread on visible slopes, or the matching panels are a different size
- Re-roof when damage covers most slopes, or when you’re switching systems. See stone-coated steel, DECRA shake and tile, TEK HURRICANE Shake Pro or standing seam. We run our own roll formers for standing seam in 24 or 26 gauge, with a typical lead time of 1 to 2 weeks.
What goes on our stone-coated repair quotes
- Drone, thermal and slope-by-slope photo report
- Brand and profile identification, and how we confirmed it
- Panel-by-panel count: touch-up vs. replacement
- Trim, ridge, flashing and pipe jack repairs, with compatible metals
- Matching plan for visible slopes
- Permit check
- Our workmanship warranty, from 10 years up to lifetime, depending on the job
Talk to us about hail on your Keller roof
We repair and replace stone-coated steel roofs in Keller, Roanoke, Southlake, North Richland Hills and Watauga. Stone-coated steel roofs are installed to manufacturer specs by certified installers. We’re certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. We’re BBB A+ rated, with 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. Request a free inspection or call (817) 733-9228.
Sources
- DECRA Homeowners Manual (cleaning, walking instructions, FAQs and Lifetime Limited Warranty)
- Texas Department of Insurance: Commissioner’s Bulletin B-0030-98 (Endorsement HO-145, Exclusion of Cosmetic Damage to Roof Coverings Caused by Hail)
- Westlake Royal: Unified Steel technical bulletin, discontinued panels and replacements (UNS550300)
- Westlake Royal Roofing Solutions: Unified Steel guide specification, Section 07 41 13 (ARCAT)
- City of Keller: Building Inspections FAQ
- NOAA Storm Prediction Center: storm reports, Aug. 26, 2026 and Sept. 21, 2026
- NOAA NCEI: Storm Events Database

