Colleyville still has plenty of homes that wear a cedar shake roof, and plenty more where the owners love that look but are tired of what cedar asks for. One option I get asked about is stone-coated steel shake, and in particular Westlake Royal’s Unified Steel Pine-Crest Shake.
I’m Blake Snow. I’ve been roofing for 30 years, and we install cedar, synthetic shake and stone-coated steel across Colleyville, Southlake and Keller. Here’s an honest side-by-side using the manufacturer’s documents, the code evaluation report and the cedar industry’s own bureau.
Pine-Crest vs. cedar at a glance
| Unified Steel Pine-Crest Shake | Natural cedar shake | |
|---|---|---|
| Material | Galvalume (AZ50 aluminum-zinc) coated steel, 0.017” coated thickness, stone granules in acrylic with a clear acrylic glaze | Split or sawn western red cedar |
| Fire | Class A in a listed assembly (Sol-R-Skin BLUE or GAF VersaShield underlayment) | Untreated has no fire-retardant treatment; Certi-Guard treated comes in Class B or C, and Class B with a special assembly makes Class A |
| Hail | Class 4 and FM Very Severe Hail (on min. 15/32” plywood) | Bureau says cedar is highly impact-resistant; test results are manufacturer-specific |
| Weight | 1.5 lb per sq. ft. (about 150 lb per 100 sq. ft.) | Varies by species, grade, thickness and moisture |
| Minimum slope | 3:12 (below that it’s decorative and must go over a code-compliant roof covering) | Per code and the bureau’s application rules |
| Installed exposure | 14-1/2” x 50” panels | Per shake length and grade |
| Warranty | Transferable 50-year limited (Westlake Royal) | Bureau-administered manufacturer’s lifetime limited warranty on Certi-label products installed by a member contractor/installer |
| Upkeep | Minimal, per Westlake Royal | Treat for fire or moss/mildew (not both in one treatment), replace split shakes, keep it clean and drying |
| Average life | Not stated beyond the warranty | About 30 to 40 years, per the bureau |
Sources: Westlake Royal’s Pine-Crest Shake page, QAI code evaluation report CERus-1008 (published July 2022, expires July 2028) and the Cedar Shake & Shingle Bureau FAQ.
Where real cedar still wins
I’ll say it plainly: nothing looks exactly like real cedar, especially up close and as it silvers. The Cedar Shake & Shingle Bureau also points out that premium-grade shakes, with grain running straight down the shake, curl less, and that treated “Certi-Last” products tend to last longer than untreated. If your heart is set on wood and your HOA wants it, we’ll build a cedar roof the right way, on a deck and underlayment plan that lets it dry.
The trade-off is upkeep. The bureau says you can treat cedar for fire retardancy or for moss and mildew, but not both in one treatment, and it doesn’t endorse topical fire-retardant sprays. In our heat and storms, plan on ongoing inspections and shake replacement.
Where Pine-Crest wins
- Fire, on paper. Pine-Crest reaches Class A in the listed assembly. For cedar to get there, you need Class B treated shakes plus a special assembly.
- Hail rating. Westlake Royal lists Class 4 and FM Very Severe Hail. The QAI report ties those ratings to a minimum 15/32” plywood deck.
- Weight. At 1.5 psf, it’s a light roof. We still check the framing and deck on every tear-off.
- Upkeep. No staining, no fire retreatment, no moss treatment.
- Warranty. A transferable 50-year limited warranty from Westlake Royal.
The decking question on a cedar tear-off
Older cedar roofs often sit on spaced boards so the wood can breathe. That matters when you switch:
- The QAI report allows batten installs over spaced structural sheathing that meets code, with minimum 2x2 wood battens.
- But the report’s Class 4 / Very Severe Hail assembly lists a minimum 15/32” plywood deck.
- Direct-to-deck installs go on solid sheathing too.
If the hail rating matters to you or your insurer, plan on solid plywood. We put it on the quote as its own line so you can see it.
Colors and matching
Westlake Royal’s Unified Steel bulletin lists Pine-Crest in Barclay, Charcoal, Gold River, Harborwood, Ironwood, Stirling Gray and Timberwood. Pick from real samples in daylight. Westlake Royal itself says online colors may vary from actual tile.
If you already have an older Gerard stone-coated roof, Westlake Royal’s bulletin lists Pine-Crest as the replacement for some discontinued Gerard and Metro shakes, but flags them as dissimilar in size or color, so they won’t match an existing roof. See our Gerard and Unified Steel repair-matching guide first.
Colleyville permits and HOAs
Colleyville requires a permit on every re-roof, and contractors have to be registered with the city. We handle the permit. If you’re in an HOA, we’ll put the Pine-Crest product sheet, color sample and fire and hail ratings in your submittal.
Other ways to get the shake look
- Composite shake: Enviroshake (we’re certified with Enviroshake) and other synthetic cedar shake lines. See Enviroshake vs. cedar.
- Other stone-coated steel: DECRA shake and tile and TEK HURRICANE Shake Pro.
- Standing seam: a cleaner, modern look. We run our own roll formers in 24 or 26 gauge, with a typical lead time of 1 to 2 weeks. See metal roofing in Colleyville.
After hail on either roof
Hail damage on cedar and stone-coated steel can be hard to read from the ground. Get a free inspection with drone and thermal imaging and a digital photo report. You can look up past storms near you in NOAA’s Storm Events Database. Hail is an insurance claim, not a warranty claim. In Texas you generally have 1 year from the date of loss to file, but check your policy. The Texas Department of Insurance says insurers set their own impact-resistant roof credits, so ask your agent before you choose.
What goes on our shake roof quotes
- Product and color (Pine-Crest, cedar grade and treatment, or composite)
- Deck plan: solid plywood or battens over existing boards, and why
- Underlayment, including the Class A layer where required
- Flashing metal, ridge, rakes and ventilation
- Permit and HOA submittal
- Free digital photo report, and our workmanship warranty from 10 years up to lifetime, depending on the job
Talk to us about a shake roof in Colleyville
We install shake-look roofs in Colleyville, Southlake, Keller, Grapevine and Westlake. Westlake Royal Unified Steel roofs are installed to manufacturer specs by certified installers. We’re certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. We’re BBB A+ rated, with 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. Request a free inspection or call (817) 733-9228.
Sources
- Westlake Royal: Unified Steel Pine-Crest Shake
- QAI: Code Evaluation Report CERus-1008, Unified Steel Stone Coated Roofing (published July 2022, expires July 2028)
- Westlake Royal: Unified Steel technical bulletin, discontinued panels and replacements (UNS550300)
- Cedar Shake & Shingle Bureau: Product FAQ
- Cedar Shake & Shingle Bureau: Pressure impregnated treated products
- City of Colleyville: Contractor registration
- Texas Department of Insurance: Products qualifying for impact-resistant roofing credits
- NOAA NCEI: Storm Events Database

