Siding in Justin
Justin sits where Farm Roads 156 and 407 cross in southwestern Denton County. The Handbook of Texas records a short-lived French Icarian colony here in 1848, a town that began with the sale of lots in 1883, and a name taken from Justin Sherman, chief engineer of the Santa Fe line. It incorporated in 1947 and spent most of the 1900s as a wheat and dairy town. Then the commuters came: Census estimates show Justin growing from 4,399 residents in 2020 to about 7,285 in 2025, roughly 66 percent in five years.
So Justin has a small older core of frame houses near downtown, a lot of brand-new subdivision homes with brick or stone downstairs and fiber cement on the gables, second story and box-outs, and acreage homes, farmhouses and barndominiums on the roads around town. New houses here are now old enough for their builder-grade trim and siding to start showing it: swollen boards at the bottom of walls, caulk that's pulled away from the trim, and fiber cement cracked by hail on the side that faced the storm.
Our Rhome office is the closest of our three to Justin, so we're here often, and the siding calls follow a pattern. After hail, it's cracked and chipped fiber cement on the side that faced the storm, holes in vinyl and dented trim. On houses that are 5 to 15 years old, it's builder-grade work starting to fail: boards swelling at the bottom edge where they sit too close to the roof or the ground, gaps at the trim, and paint that's already chalking. On older homes and acreage houses, it's full re-sides and matching a shop or barn to the house.
Justin: no siding permit, so check your contractor
Justin is one of the few cities around here that says outright that replacing siding doesn't need a permit. The city's building FAQ lists replacing siding, along with roof repairs or replacements, as work that doesn't require one. That makes the contractor you pick matter more, because no city inspector looks at the wall before it's covered:
- The contractor still registers. The FAQ says all general contractors and subcontractors must be registered with the city, and the application fee is $50. Registration and permits run through the city's iWorQ portal. Ask anyone who quotes your siding whether they're registered.
- Some siding jobs grow into permitted work. Adding onto the house, removing or relocating walls, plumbing and electrical work, and new structures over 120 square feet do need a permit. If rotted framing or a new opening turns up, the city says no work starts until the permit is issued, and permits take 10 business days to review.
- Get the wall in writing. Ask for the house wrap, flashing and trim details in the estimate, and for photos of the sheathing once the old siding is off. We do that on every job, permit or not.
If your neighborhood has an HOA, its approval of the material and color is still a step, and we put that submission together before we order anything.
Siding materials, in plain English
We install any kind of siding, in all major brands. Most homeowners don't know the product names, and they don't need to. What matters is how each material behaves on a North Texas wall:
| Material | What it is | Good to know |
|---|---|---|
| Vinyl | Plastic lap or panel siding with the color all the way through | Lowest upkeep and budget-friendly. Thicker panels resist cracking better; thin vinyl can crack in a hard hailstorm, especially on a cold morning. |
| Fiber cement | A rigid board made from cement and fibers, usually painted | Won't rot or burn, holds paint well, and looks like painted wood. Heavier, so it takes more care to install and cut. |
| Engineered wood | Wood fibers pressed with resins into lap boards and panels | A real wood look and lighter than fiber cement. The ends and cuts have to be sealed and painted right. |
| Metal | Steel or aluminum lap or vertical panels | Very durable, and it can match a metal roof. Large hail can dent it. |
| Stucco and stone veneer | Cement plaster or thin stone over a lath system | Common as accents on gables and entries. Repairs are about blending texture and color, not just patching. |
We'll show you samples on your own wall and give you the tradeoffs in writing, including cost, maintenance and how each one holds up to hail and heat.
On most newer Justin houses, the replacement is fiber cement on the gables, second story and box-outs, matched to the house's color and profile. On older homes, farmhouses and barndominiums, the full range is on the table, including metal siding that can match a metal roof.
What happens under the new siding
Siding is the part you see. The part that keeps the wall dry is underneath, and that's where cheap siding jobs cut corners:
- Tear-off and look. Once the old siding is off we check the sheathing for soft spots, rot and old leaks, especially below windows and at the bottom of walls, and show you photos before anything is covered up.
- Repair the wall. Damaged sheathing is replaced, and rotted trim and fascia are fixed instead of wrapped. See soffit and fascia.
- House wrap and flashing. The weather barrier is lapped the right way, and windows and doors are flashed into it so water runs out, not in. See replacement windows.
- Siding and trim. Installed to the manufacturer's instructions, with the right clearances at the roof line, grade and flatwork.
- Paint and clean-up. Painted siding gets exterior paint once the walls and trim are done, then a final walkthrough.
Builder-grade siding that's failing early
A lot of Justin houses were built fast during the last few years of growth. The most common problems we find aren't the siding product itself but how it went on: boards with no gap above the roof line or flatwork, so the bottom edge wicks water; missing or reversed flashing above windows and doors; unsealed cut ends; and caulk doing the job flashing should. Fixing those means taking the affected boards off and doing the wall right, not just re-caulking. If your house is still under a builder warranty, we'll document what we find so you can take it to the builder first.
Shops, garages and barns on the same lot
A lot of Justin properties have more than one building: a detached garage, a shop, a barn or a loafing shed. When we re-side or repaint the house, we look at those too, because a mismatched outbuilding stands out once the house is done, and wind and hail don't skip them. We can side, paint or re-roof the outbuildings in the same visit, including barn and shop roofs in 24 or 26 gauge metal from our own roll formers.
Justin's hail record
NOAA's Storm Events Database lists 41 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Justin from 2016 through the September 2026 update. The storm that changed a lot of Justin houses was April 1, 2024:
- 3-inch hail less than a mile from the center of Justin, 1.75-inch hail about a mile away, 2.5-inch hail about three miles east, and 3.4-inch hail at Justin about three miles south, all the same afternoon.
- May 10, 2021: 4-inch hail near Ponder about six miles north.
- June 11, 2023: 3-inch hail near Smoots about six miles east.
- March 14, 2024: 3-inch hail near the Roanoke-area airport about seven miles southeast.
- More recently, 1.75-inch hail near Justin on June 2, 2024, 1-inch hail in Justin on April 23, 2025, and 1.75-inch hail near Rhome on November 24, 2025.
The April 1, 2024 storm hit walls as well as roofs. Hail that size cracks fiber cement, holes vinyl, dents metal and breaks glass on the side facing the storm.
Wind around Justin
- April 30, 2019, EF-1 tornado: NOAA says it formed in open pasture about 1.2 miles east-southeast of Justin, snapped and twisted large hardwoods with winds estimated at 85 to 90 mph, and ended near the Northridge Estates subdivision in Northlake, where several homes had minor roof damage.
- March 2, 2023: thunderstorm winds knocked down a large billboard in Justin.
- May 28, 2024: NOAA lists multiple homes with shingles torn off in a neighborhood near Highway 114 and Highway 156.
The same winds that peel shingles pull siding loose at corners and gable ends and drive rain behind trim that isn't sealed. New subdivisions around Justin often have young trees that don't break the wind yet, so we look hard at the windward walls.
Hail-damaged siding in Justin
We document cracked and chipped fiber cement, holed vinyl, dented metal and broken trim along with the roof, gutters and windows in one storm inspection, with a free digital photo report, so your adjuster sees the whole house. On a mostly brick house, siding damage is often up on the gables and dormers, where it's easy to miss from the ground, so we photograph it up close. Matching is the hard part on older siding: when a profile isn't made anymore, we'll show you what a repair would look like next to the original before you decide. If you file an insurance claim, we document the damage with photos and meet your adjuster. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file a claim; check your policy.
Siding and a new roof, on one schedule
The roof edge, drip edge, soffit, fascia, gutters and the top course of siding all meet at the same line. When one company does them together, colors are picked in one meeting, the flashing is tied in once, and nobody has to come back and pull off the other crew's work. Our own crews build everything, so you have one schedule and one person to call.
Who replaces siding in Justin?
Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:
- 75 years as a family roofing and exterior business, and 30 years in the trade for owner Blake Snow.
- 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
- Snow Roofing & Exteriors is BBB A+ rated, fully insured, with references available on request.
- Our own crews, about 7 road miles (roughly 11 minutes) from Justin at our Rhome office, doing the tear-off, wall repairs and new siding.
- One company for the whole outside of the house: roofs, gutters, siding, windows, soffit and fascia, paint, and outdoor living.
- A workmanship warranty from 10 years up to lifetime, depending on the job, in writing.
Photos
The photos below show siding replacement work by our crews, before, during and after. We never show a street or address.
More in Justin: our Justin roofing page, storm damage in Justin, metal roofing in Justin and standing seam in Justin. Nearby: siding in Krum and siding in Denton.
Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.
