Southlake has plenty of French country, Tudor and transitional homes that look right with slate, and plenty of framing that wasn’t built for 900-plus pounds per square. That’s where synthetic slate comes in. EcoStar is one of the longest-running names in it, and the first decision with EcoStar is one most homeowners don’t know they’re making: Class C or Class A?
I’m Blake Snow. I’ve been roofing for 30 years and we install synthetic slate across Southlake, Westlake and Colleyville. Here’s what EcoStar’s own 2026 documents say, side by side.
Who EcoStar is
EcoStar, LLC is based in Holland, New York, and says it has made synthetic roofing since 1993 and manufactures in the USA. You may see older material calling it a Carlisle company: Carlisle did own the roofing business once, but Plastics News reported that Staroba Plastics bought it back in 2010.
Class C (Majestic) vs. Class A (Empire) at a glance
| Class C line (Majestic / Seneca) | Class A line (Empire) | |
|---|---|---|
| Material | Starloy: 80% recycled rubber and plastic | Empire: 25% recycled plastic |
| Fire rating (UL 790) | Class C | Class A (with Class A underlayment) |
| Impact rating (UL 2218) | Class 4 | Class 4 |
| Standard slate thickness / weight | 1/4”, 275 lb per square | 1/4”, 308 lb per square |
| Niagara Slate (thick butt) | 5/8”, 250 lb per square | 5/8”, 290 lb per square |
| Miami-Dade approval | No (Florida approved) | Yes |
| Colors | 12 | 14 |
| Cool roof colors | No | Yes |
| Custom / marbled colors | No | Yes |
Weights are at maximum reveal, from EcoStar’s April 2026 product overview. For comparison, the National Slate Association puts natural 1/4” slate at about 935 lb per square. Slate profiles include 12” and 10” Traditional, a 6/9/12” random-width blend, Designer Series beaver tail, beveled edge and chisel point, and the 5/8” Niagara slate for bolder shadow lines.
Which one fits a Southlake home
- Choose the Class A (Empire) line if your HOA, insurer, architect or a local requirement asks for a Class A roof, or if you want cool-roof or custom colors. Plan for the extra underlayment layer.
- The Class C (Majestic) line is lighter per square, uses far more recycled content, and is still Class 4 for hail. It suits homes where Class A isn’t required. Check your HOA covenants and ask your insurance agent before you choose.
- Niagara Slate in either line gives a thicker, chunkier look closer to graduated natural slate, at less weight than standard tiles because of its cavity-back design.
The Class A system: one more layer
EcoStar’s Gold Star spec says Class A installations need GAF VersaShield (or an EcoStar-approved alternate) over the entire deck, on top of EcoStar’s Glacier Guard ice and water membrane. Skip it and you don’t have a Class A roof. It goes on our quotes as its own line item.
Install rules that protect the roof
From EcoStar’s Gold Star spec (updated 9/18/2026) and Majestic product data:
- Minimum slope 3/12. On slopes under 6/12, Majestic tiles are limited to a 6” exposure.
- Tear off to the deck. No overlays. Minimum 15/32” plywood or 7/16” OSB, or 3/4” tongue-and-groove boards.
- Stainless steel ring-shank nails, at least two per tile, at the “NAIL HERE” marks, never overdriven. Overdriven nails curl the tile ends and EcoStar says those tiles will never lie flat.
- Copper and stainless flashing are what EcoStar suggests, but it warns concentrated copper runoff can stain the tiles. We plan the water path.
- Ridge venting: on slopes from 3/12 to 12/12, EcoStar requires its EcoVent if a ridge vent is used.
- Photos of the underlayment on every elevation are required for the Gold Star warranty. We include them in your digital photo report.
What the Gold Star warranty does and doesn’t cover
EcoStar offers a 50-year material warranty and a 50-year transferable labor and material (Gold Star) warranty. The Gold Star version requires:
- An authorized EcoStar Gold Star applicator
- EcoStar-supplied components
- A pre-project survey approved by EcoStar before the bid (and extra review for wind speeds over 90 mph or slopes outside 3/12 to 12/12)
- A post-install inspection by an EcoStar field representative
EcoStar says the warranty does not cover appearance, so color blend and shading are on the installer. We lay out tiles from multiple bundles and show you the blend before the whole roof goes on. We’ll tell you in writing which warranty path your job qualifies for.
Comparing brands? See BRAVA vs. DaVinci synthetic slate, Euroshield rubber slate and our synthetic vs. real slate guide.
What goes on our synthetic slate quotes
- Brand and line (EcoStar Class C or Class A), profile, color and exposure
- Fire rating you’re getting, with the Class A underlayment listed if needed
- Deck repair allowance, ice and water, underlayment and stainless fasteners
- Flashing metal and how copper runoff is handled
- Warranty path in writing
- Free digital photo report, and our workmanship warranty from 10 years up to lifetime, depending on the job
Talk to us about synthetic slate in Southlake
We install synthetic and natural slate in Southlake, Westlake, Colleyville, Keller and Trophy Club. We’re certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers, and every roof is installed to manufacturer specs by certified installers. We’re BBB A+ rated, with 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. Request a free inspection or call (817) 733-9228.
Sources
- EcoStar: Product Overview (April 20, 2026)
- EcoStar: Class A (Empire) and Class C (Majestic/Seneca) Gold Star Roof System Specifications (updated 9/18/2026)
- EcoStar: Majestic Slate product technical data
- EcoStar: Products
- Plastics News: Staroba Plastics buys back EcoStar roofing business (2010)
- National Slate Association: Common myths about slate roofing (weight)

