A lot of the homes I roof around Springtown are long, low ranch houses with stone or brick walls. They’re built to last, and a standing seam metal roof fits them well. The question I get most at the kitchen table isn’t about gauge or seams. It’s “What color should we pick?” On a stone house, that choice matters more than people expect, because the roof is the biggest single surface you see from the road.
I’m Blake Snow. I’ve been roofing for 30 years, I’m the third generation in a family roofing business that goes back 75 years, and our crews have completed over $80 million in roofing projects. Here’s how I’d walk you through color and trim on a stone ranch house.
Start with the stone, not the color chart
Stone is never one color. Hold a color chart up to a wall of Texas limestone or field stone and you’ll see tan, gray, cream, rust and brown all in the same few feet. That’s why I tell people to pick the roof from the stone, not the other way around.
Here’s a simple way to do it:
- Stand back at the street and look at the house for a minute. Notice the darkest shade in the stone and the warmest one.
- Pick a panel color that sits close to one of those. A roof that echoes something already in the stone looks like it belongs.
- Look at a real panel sample outside, in daylight, against the wall. A color on a screen or under shop lights can look very different in North Texas sun.
Dark roofs, light roofs and mixed stone
Darker colors like charcoal and dark bronze are the most common choice I see on stone and brick ranch homes. They frame the walls, hide the shadow lines between panels, and don’t fight the many shades in mixed stone. Our post on standing seam vs. R-panel on a ranch house shows a charcoal roof on brick.
Lighter and mid-tone colors can look sharp on pale limestone or cream stone, especially on a house with a lot of white trim. They give a softer, more open look.
Bold colors like barn red or forest green can work on a ranch or country home with simple stone, but they make a statement. If you’re unsure, put the sample against the stone and live with it for a day.
If you’re in an HOA or a neighborhood with architectural rules, check what’s allowed before you fall in love with a color. We handle the HOA paperwork and approvals start to finish for our customers. Our HOA and architectural review post covers what boards usually ask for.
Trim: the part that ties it together
Trim is where a metal roof on a stone house looks finished or looks pieced together. The pieces you’ll see are the eave trim, the rake trim on the gable ends, the ridge and hip caps, and the flashing where the roof meets the walls.
On most stone ranch homes, I like the trim to match the panels so the roof reads as one clean piece. We run our own roll formers and bend the trim and flashing from the same steel as the panels, so the color and finish match. That’s hard to get when the trim and panels come from different places. Our post on flashing details explains why that trim matters for keeping water out, not just for looks.
Where the roof meets the stone at a wall or chimney, the flashing has to seal against an uneven surface. That takes more care than flashing against siding, and it’s worth asking any roofer how they’ll handle it.
Gutters, fascia and the rest of the exterior
The roof isn’t the only color up there. Gutters, downspouts, fascia, soffits and shutters all sit right next to it. A few things I’d think about:
- Gutters can match the roof or the fascia. Matching the roof makes the roof look heavier and more solid. Matching the fascia makes the roof line look crisper. Either is fine if it’s done all the way around. See our gutter services.
- Fascia and soffit on older ranch homes are often worn or rotted by the time the roof is replaced. It’s a good time to fix or update them. See soffit and fascia.
- Shutters and doors are easy to repaint, so the roof color should lead and the shutters can follow.
Not sure about standing seam?
Standing seam isn’t the only metal option for a stone house. Stone-coated steel looks like shake or tile from the ground and can suit a more traditional home. You can see all the profiles we install on our metal roofing page. Our standard on standing seam is 26-gauge steel, and 24-gauge is available.
And if you just need a repair, a few panels replaced or a leak traced, we’re glad to do that too.
About the photo
The photo isn’t from Springtown. It’s a standing seam roof our crew installed on a tan brick ranch home, with dark trim along the eave and rake, a dark shutter and a matching downspout. It shows how a roof, its trim and the gutters can work together with the color of the walls.
Nearby towns
We roof homes all around Springtown, including Azle, Reno, Weatherford, Willow Park, Boyd and Rhome.
Let’s look at your roof
If you’re thinking about metal on a stone or brick ranch house, we’d be glad to come out and talk through colors with you on site. Every inspection comes with a free digital photo report. Our workmanship warranty runs from 10 years up to lifetime, depending on the job. We’re A+ rated on the BBB, and our Google ratings are 5.0 at all three offices: 86 reviews in Bridgeport, 13 in Decatur and 3 in Rhome. We serve the entire DFW Metroplex and towns within about 65 miles of Bridgeport.
Call (817) 733-9228 or request an estimate, and we’ll set up a time to walk your roof with you.