Two natural slate quotes for the same Westlake home can be tens of thousands of dollars apart, and both can say “natural slate.” The difference is usually hiding in three words most homeowners skip: grade, thickness and sorting.
I’m Blake Snow. I’ve been roofing for 30 years, and we install and repair natural slate across Westlake, Southlake and the Park Cities. Here’s how to read a slate quote so you know what you’re actually buying.
Grade: ASTM C406 S1, S2 and S3
ASTM C406 is the U.S. standard for roofing slate. It grades slate on three lab tests, and the grade predicts how long the stone holds up to weather:
| ASTM C406 grade | Min. breaking load (C120) | Max. absorption (C121) | Max. depth of softening (C217) | Expected service life |
|---|---|---|---|---|
| S1 | 575 lb | 0.25% | 0.002 in. | Over 75 years |
| S2 | 575 lb | 0.36% | 0.008 in. | 40 to 75 years |
| S3 | 575 lb | 0.45% | 0.014 in. | 20 to 40 years |
Notice the breaking load is the same for all three. What separates them is how much water the stone absorbs and how much it softens in the acid test. Those are what make slate flake, delaminate and fail over decades.
What to ask for:
- The grade in writing. “Premium slate” isn’t a grade. S1 is.
- Test results for that quarry and color. Reputable quarries publish them. New England Slate, for example, lists breaking load, absorption and softening numbers for each of its colors.
- No ribbon slate on the field. ASTM C406 excludes slate with soft carbonaceous “ribbons” because its service life is uncertain.
The Slate Roofing Contractors Association’s architectural standard calls for S1. On a Westlake estate roof, that’s what I recommend too.
Thickness: what “1/4 inch” really means
The National Slate Association says standard roofing slate today is nominal 1/4” or 1/4” to 3/8”, and that 3/16” is no longer commonly produced. “Nominal” matters: slate is split by eye, so a 1/4” order will include some pieces closer to 3/16” and some closer to 5/16”. The NSA says about plus or minus 1/16” is the tightest tolerance you can reasonably ask for.
Thickness drives weight, and weight drives framing:
| Nominal thickness | Approx. weight per square (3” headlap) |
|---|---|
| 3/16” | 675 to 700 lb |
| 1/4” | 935 lb |
| 1/4” to 3/8” | 1,170 lb |
| 3/8” | 1,405 lb |
| 1/2” | 1,870 lb |
Figures from the National Slate Association and North Country Slate. For comparison, synthetic slate is a fraction of that (see our synthetic vs. natural slate post).
If your home never had slate, the framing has to be checked for that load before we quote it. We’ll tell you up front.
Graduated roofs and sorting
- Uniform roof: one length, width and thickness. Clean and formal.
- Graduated roof: longest, thickest slates at the eaves, getting shorter and thinner toward the ridge. The NSA notes eave slates can be 1” or more and 3/16” at the top. It’s the classic look on grand Tudor and Georgian homes, and it costs more in material and labor.
- Sorting: even on a uniform roof, slates should be sorted by thickness before they go up, so the roof lies flat and looks even. If a quote doesn’t mention sorting, ask.
What else separates a 100-year slate roof
- Fasteners: copper or stainless nails, two per slate, set so the slate hangs on the nail rather than being driven tight.
- Flashing: copper or other long-life metal at valleys, chimneys and walls. Slate outlasts cheap flashing. See our post on copper flashing, valleys and gutters.
- Headlap: a standard 3” headlap, more on lower slopes.
- Quarry and color: “fading” vs. “unfading” colors change differently over time. Compare sources in natural slate sources: Greenstone, Evergreen and CUPA and our slate quarries and brands guide.
What goes on our natural slate quotes
- Quarry, color, and ASTM C406 grade (we recommend S1) with test results
- Nominal thickness and tolerance, and whether it’s uniform, intermingled or graduated
- Size, exposure and headlap
- Sorting by thickness before install
- Nail type (copper or stainless), flashing metal and weight, underlayment
- Free digital photo report, and our workmanship warranty from 10 years up to lifetime, depending on the job
Have an older slate roof? Read natural slate repair vs. replacement before anyone tells you to tear it off.
Talk to us about natural slate in Westlake
We install and repair natural slate in Westlake, Southlake, Trophy Club, Colleyville and Highland Park. We’re certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. We’re BBB A+ rated, with 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. Request a free inspection or call (817) 733-9228.
Sources
- ASTM C406/C406M Standard Specification for Roofing Slate
- National Slate Association: Origins of ASTM C406 (Table 1, classification of roofing slates)
- National Slate Association: Guide specification for uniform slate roofs (thickness note)
- National Slate Association: Types of slate roofs
- National Slate Association: Common myths about slate roofing (weight)
- North Country Slate: How much does a slate roof weigh?
- Slate Roofing Contractors Association: General architectural standards
- New England Slate: ASTM test results

