Flower Mound summers are long, bright and hot, and a roof soaks all of that up. That’s why I get asked about “cool roof” shingles more and more, especially on two-story homes where the upstairs bedrooms never seem to cool off. Atlas has one of the best-known answers: Pinnacle Sun. Most homeowners compare it with Atlas’s popular Pinnacle Pristine, because the two look alike in a brochure.
I’m Blake Snow. I’ve been roofing for 30 years, and we’re certified with Atlas. Here’s how the two compare using Atlas’s own data sheets and its April 2026 Pinnacle Sun update, and which one I’d put on which kind of Flower Mound house.
The short answer
- Want a lighter roof color and a little help with summer heat? Pinnacle Sun is built for that, with 3M cool roofing granules and published SRI ratings.
- Want a darker color, or need to match an HOA palette? Pinnacle Pristine has far more colors.
- Worried most about hail? Both are Class 3. For the top Class 4 rating, look at Atlas Pinnacle Impact or StormMaster Shake, or a standing seam metal roof.
Pinnacle Sun vs. Pinnacle Pristine at a glance
| Pinnacle Sun | Pinnacle Pristine | |
|---|---|---|
| Built for | Cool roof / energy codes | Everyday architectural with algae protection |
| Cool roofing granules | 3M cool roofing granules | Not marketed as a cool roof |
| Smog-reducing granules | 3M smog-reducing granules | Not listed on the data sheet |
| Algae protection | 3M Scotchgard Protector, lifetime algae limited warranty | 3M Scotchgard Protector |
| Size / exposure | 42” x 14” / 6” (HP42) | 42” x 14” / 6” (HP42) |
| Impact rating (UL 2218) | Class 3 | Class 3 |
| Standard wind (Atlas product page) | 130 mph | 130 mph (HP42, 4 nails) |
| Upgraded wind (Atlas data sheet) | 160 mph wind limited warranty, with Atlas’s system requirements | Up to 160 mph, with Atlas’s system requirements |
| Fire | Class A | Class A |
| Colors | 7 “Cool” colors with SRI 19 to 25 | 16 colors in current literature |
Sources: Atlas’s Pinnacle Sun page, Pinnacle Sun data sheet, Pinnacle Sun resource center and Pinnacle Pristine data sheet. The wind term your roof gets depends on Atlas’s full system requirements, and we’ll put which one applies in writing.
Pinnacle Sun SRI by color (2026)
SRI (Solar Reflectance Index) is a single number for how well a roof surface sends the sun’s heat back to the sky. Higher is cooler. Atlas raised SRI across every Pinnacle Sun color in its April 1, 2026 update, about 15% to 25% depending on color, and added a new color, Cool Oyster.
| Pinnacle Sun color | Initial SRI (CRRC) |
|---|---|
| Cool Oyster 2.0 | 25 |
| Cool Sand 2.0 | 21 |
| Cool Moonlight Beach 2.0 | 21 |
| Cool Surf 2.0 | 20 |
| Cool Driftwood 2.0 | 20 |
| Cool Coral Canyon 2.0 | 19 |
| Cool Coastal Cliffs 2.0 | 19 |
These are initial values from the Cool Roof Rating Council. Roofs lose some reflectance as they age and collect dust, which is one reason the Scotchgard algae protection matters: Atlas says keeping algae streaks off helps the cool granules keep working.
Will it really cool the house?
Here’s the honest version. Atlas cites the CRRC figure that a cool roof can cut cooling costs up to 15%. “Up to” is doing a lot of work in that sentence. On a Flower Mound two-story, what decides how hot the upstairs gets is usually:
- Attic ventilation: enough intake at the soffits and exhaust at the ridge.
- Attic insulation: depth and coverage.
- Ductwork in the attic: ducts running through a 140°F attic lose a lot of cooling.
- Roof color and SRI: this is where Pinnacle Sun helps.
When we bid a re-roof, we look at ventilation on every job. A cool shingle on a poorly vented attic won’t give you what you’re paying for.
Hail: where both shingles stop
Both shingles are UL 2218 Class 3. That’s better than a basic shingle but a step below Class 4, which is the rating most Texas insurers look for when they give a premium credit. If hail is your main worry, compare:
- Atlas Pinnacle Impact or StormMaster Shake (Class 4). See my Atlas Pinnacle Pristine vs. Impact vs. StormMaster Shake post.
- Other Class 4 shingles on our Class 4 impact-resistant shingle page, including the new TAMKO HailGuard line.
- Standing seam metal: light-colored standing seam in Flower Mound is both reflective and very hard on hail. We run our own roll formers for 24- and 26-gauge panels, with a typical lead time of 1 to 2 weeks.
HOA and color questions in Flower Mound
Many Flower Mound neighborhoods have HOA color rules. Before you fall in love with Cool Oyster:
- Get your HOA’s approved color list, or ask whether they approve by manufacturer and color name.
- Look at full-size shingles outside, not just a brochure. Atlas says final color picks should be made from full-size shingles.
- If the HOA wants a darker roof, Pinnacle Pristine’s wider palette is usually the easier approval.
We’ll handle the paperwork for the HOA submittal with you.
Questions to ask before you sign
- Exactly which line, Pinnacle Sun or Pinnacle Pristine, and which color?
- Are the bundles HP42, and which wind warranty applies to my roof?
- What starter, hip and ridge and underlayment are included?
- How will you fix attic ventilation, and is it in the price?
- Is decking replacement priced per sheet?
- What’s your workmanship warranty, in writing?
After a storm in Flower Mound
Hail and wind do hit this part of Denton County. Look up storms near you in the NOAA NCEI Storm Events Database, and see our Flower Mound storm damage page. In Texas it’s generally 1 year from the date of loss to file a claim, but check your policy.
Talk to us about an Atlas roof in Flower Mound
We install Atlas shingles in Flower Mound, Highland Village, Lewisville, Lantana, Double Oak, Argyle and Copper Canyon. We’re certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. Our workmanship warranty runs from 10 years up to lifetime, depending on the job. We’re fully insured, BBB A+ rated, and have 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
See our Atlas shingles page, use the estimate form below, or call (817) 733-9228.

