Most people who search for a metal roof in Flower Mound picture standing seam: long, clean vertical panels. That’s a great roof, and it’s the one I push hardest. But Flower Mound has more kinds of houses than almost any town we serve: brick and stone two-stories in master-planned neighborhoods, Tudor and Mediterranean-style homes with steep, cut-up roofs, newer modern farmhouses, and acreage on the west side with shops and barns. One kind of metal doesn’t fit all of them.
I’m Blake Snow. I’ve been roofing for 30 years, I’m the third generation in a family business that goes back 75 years, and our crews have completed over $80 million in roofing projects. We form standing seam and R-panel on our own roll formers in 24 or 26 gauge, our own crews install them, and we also install stone-coated steel, metal shingles and metal tile. Here’s how I’d match a metal roof to a Flower Mound house.
The short answer
- Standing seam for farmhouse, modern, transitional and lake-style homes, and for anyone who wants the longest-lasting, cleanest-looking metal roof.
- Stone-coated steel when the house or the HOA calls for the look of shake, clay tile or shingles.
- Metal shingles or metal tile for traditional homes that want a crisp painted metal finish without vertical panels.
- Mixing them is common: a stone-coated or shingle main roof with standing seam over the porch, bays or entry.
The three metal roofs, side by side
| Standing seam | Stone-coated steel | Metal shingles and tile | |
|---|---|---|---|
| What you see | Long vertical panels with raised seams | Stone-granule texture shaped like shake, tile or shingles | Smooth or embossed painted pieces shaped like shingle, slate, shake or tile |
| Fasteners | Hidden under the seams on clips | Hidden in the interlock | Hidden in the interlock |
| Best fit | Farmhouse, modern, transitional, brick two-stories, lake homes | Tudor, Mediterranean, ranch and HOA homes that need a traditional look | Traditional brick and stone homes |
| How it’s made | Formed on our roll formers to the length of each run | Finished pieces from the manufacturer | Finished pieces from the manufacturer |
Standing seam is our top pick when the house can carry the look. Because we form the panels ourselves, most roof planes go on with one piece from ridge to eave and no end laps. For the details on full roofs here, see our standing seam in Flower Mound page and my post on why we form panels on site.
Stone-coated steel is steel coated with a bonded layer of stone granules and pressed into shake, tile or shingle profiles. It’s much lighter than clay or concrete tile, which matters on a house that was never framed for tile. Brands we install include DECRA and Tilcor, among others. My post on stone-coated steel that looks like shake or tile goes deeper.
Metal shingles and metal tile are interlocking pieces with a painted or embossed finish. They suit a traditional house where the owner wants metal’s resistance to rot, splitting and curling without the look of panels. See metal shingles and metal tile for traditional homes.
Matching metal to Flower Mound house styles
- Brick or stone two-story with gables and dormers. Standing seam in charcoal, dark bronze or a medium gray suits these well. If the HOA wants a softer look, stone-coated steel in a shake profile is the next step.
- Tudor or Mediterranean. A tile-profile stone-coated steel roof gives the tile look at a fraction of the weight. Copper or standing seam can dress up a turret or arched entry. See copper roofing.
- Modern farmhouse or transitional. Full standing seam, usually black, charcoal or bronze.
- Acreage with a shop, barn or cabana. Standing seam or R-panel on the outbuildings, in the same color as the house.
If you’re torn between a full metal roof and metal accents, my post on standing seam accents in Highland Village and Flower Mound walks through that choice.
HOA review in Flower Mound
Many Flower Mound neighborhoods have an HOA with an architectural committee, and some review roof material, profile and color closely. A few things help:
- Submit the actual product. We put together product sheets, color chips, the profile and a simple drawing of the trim so the committee can decide on the first pass.
- Know where the law stops. Texas Property Code Section 202.011 limits an HOA’s ability to block wind- and hail-resistant shingles that look like what the subdivision already allows. It’s written about shingles, so don’t assume it covers standing seam. Ask the committee, and read your deed restrictions.
- Get it in writing before anything is ordered.
Town of Flower Mound permits
The Town’s residential permit guidelines say a permit is required to have your roof replaced, and roof replacement or re-covering must comply with the Town’s currently adopted codes. The Town’s construction codes page says permit applications since October 1, 2025 fall under the 2024 International Residential Code. Two practical points:
- We pull the permit and schedule the inspection. Ask any roofer who bids to show you the permit before work starts.
- Patio covers and porches are separate. The Town requires a building permit before building a shade structure, so a new standing seam patio cover gets its own permit. See pergolas and patio covers.
Hail around Flower Mound
NOAA’s Storm Events Database lists 56 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Flower Mound from 2016 through its September 2026 update. Some came very close:
- June 11, 2023: 4.25-inch hail about 1.3 miles from the center of town, 4-inch hail about 2 miles away, and 3-inch hail about 3 miles away.
- March 14, 2024: 3.5-inch hail about 2 miles away.
- April 28, 2021: 2-inch hail about 3 miles away.
Hail that size can dent any metal roof, and I’ll tell you that before you sign. Metal doesn’t crack, split or shed granules like an asphalt shingle, and heavier panels dent less than thin ones. Stone-coated steel’s textured surface also hides small marks better than smooth paint. Ask your insurance company how it treats metal roofs and cosmetic dents, and see my post on metal roofs and hail. If a storm already came through, start with our Flower Mound storm damage page. In Texas you generally have 1 year from the date of loss to file a claim, but check your policy.
Why Flower Mound owners call us
- Our own roll formers and our own crews for standing seam and R-panel, 24 or 26 gauge.
- Metal lead time is typically one to two weeks.
- Certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers.
- 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
- BBB A+ rated.
- Workmanship warranty from 10 years up to lifetime, depending on the job.
See our full metal roofing in Flower Mound page. We also work in nearby Highland Village, Bartonville, Double Oak, Lantana, Copper Canyon and Argyle.
Get a metal roof estimate in Flower Mound
Tell me about your house and what your HOA allows, and I’ll show you real samples of standing seam, stone-coated steel and metal shingles side by side. Every estimate starts with a free digital photo report. Request an estimate or call (817) 733-9228.

