Offices in Bridgeport · Decatur · Rhome · Class 3+ impact-rated shingles on every roof Call (817) 733-9228
Snow Roofing & Exteriors logo

Free Roof Replacement Estimate

📞 Call (817) 733-9228
Blog

Metal Roofs and Hail in Little Elm: What Holds Up, What Dents and What Insurance Covers

By Blake Snow, owner ·

Illustration of a tan brick two-story home with a charcoal standing seam metal roof and porch roof, small hailstones on the driveway and a lake behind it under clearing storm clouds
Illustration

Little Elm sits right on Lewisville Lake, and storms that build west of the lake often roll straight across it. If you’ve lived here a few springs, you’ve probably had at least one roof claim, and a lot of homeowners start asking the same question: “Should my next roof be metal?”

I’m Blake Snow. I’ve been roofing for 30 years, I’m the third generation in a family business that goes back 75 years, and our crews have completed over $80 million in roofing projects. We form standing seam and R-panel on our own roll formers in 24 or 26 gauge, and our own crews install them. Here’s the straight answer on metal and hail in Little Elm, including the parts other roofers skip.

The short answer

  • Metal handles hail better than standard shingles in the ways that cause leaks. It doesn’t crack, split, or lose granules.
  • Big hail can still dent it. No roof sold today is dent-proof.
  • Your insurance policy matters as much as the roof. Some Texas policies exclude cosmetic hail damage, so read yours before you choose.
  • The right metal for a hail town is a heavier gauge, a profile or finish that hides marks, and a good install over solid decking.

How much hail Little Elm actually gets

NOAA’s Storm Events Database lists 60 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Little Elm from 2016 through its September 2026 update. Some came very close to town:

  • April 11, 2016: 2.75-inch hail about 2 miles from the center of Little Elm.
  • April 10, 2017: 2-inch hail about 1.3 miles away.
  • March 26, 2017: 4.25-inch hail about 8 miles away, near Corinth.
  • June 11, 2023: 3.5-inch hail about 4.6 miles away, plus 2-inch hail about 2.5 miles away.
  • March 14, 2024: 2.5-inch hail about 3 miles away.

That’s a lot of golf-ball and bigger hail for one lake town. It’s why so many Little Elm roofs have been replaced more than once since the neighborhoods were built.

What hail does to metal vs. shingles

Asphalt shinglesMetal roof
Typical hail damageBruised mat, cracked tabs, lost granulesDents in the panel or trim
Does it usually leak right away?Damage can open paths for water over timeA dent alone usually doesn’t let water in
Ages faster after a storm?Yes, granule loss speeds up wearPaint finish usually stays intact unless the hail is very large
What the adjuster looks atFunctional damage to the shingleWhether the dent is cosmetic or affects function

Shingle damage tends to get worse after the storm because the asphalt is exposed to the sun. A dent in a metal panel is mostly a looks problem unless it breaks the finish, bends a seam, or damages flashing.

Which metal roofs hold up best to hail

Not all metal is equal when the hail starts:

  • Standing seam, 24 gauge. Heavier steel dents less than lighter steel. We form panels on site in 24 or 26 gauge, and for homeowners worried about hail, I’ll walk you through the difference in person with real samples. Details for this town are on our standing seam in Little Elm page.
  • Striated or ribbed panels. Small ribs in the flat of the panel stiffen it and break up the reflection, so marks are harder to see.
  • Stone-coated steel. Its bonded stone-granule surface hides small dents better than smooth paint, and it looks like shake, tile or shingles for HOA neighborhoods.
  • Metal shingles and metal tile. Short, interlocking pieces with embossed finishes, which also hide marks well.
  • Color. Medium and lighter colors usually show dents less than glossy black.

What’s under the metal matters too. We check the decking, use a high-temperature underlayment, and flash walls, chimneys and valleys with formed trim so a storm doesn’t find a weak spot.

The insurance part nobody explains

In 1998 the Texas Department of Insurance approved optional endorsements that exclude cosmetic hail damage to roof coverings that earn an impact-resistance premium credit. The homeowners version is called HO-145 (TDI bulletin B-0030-98). Many carriers now use their own cosmetic-damage wording too.

What that means for you:

  • Ask your agent before you pick a roof. Ask whether your policy has a cosmetic hail exclusion and whether a metal roof changes your premium.
  • Know the trade. A discount on your premium may come with less coverage for dents that don’t leak.
  • Document the new roof. Keep photos, the invoice and the product info. Every estimate we do starts with a free digital photo report, which also gives you a “before” record.

If a storm already came through, start with our Little Elm storm damage page. In Texas you generally have 1 year from the date of loss to file a claim, but check your policy.

Town of Little Elm permits and HOAs

  • Permit required. The Town of Little Elm’s permit portal lists a roofing permit for repair or replacement of 100 square feet or more of roofing.
  • Online through MyGov. The Town’s residential permits page says permits and contractor registrations are handled online through MyGov.
  • HOA approval first. The same page says if you’re in an HOA, you may need to submit an Architectural Review Committee form, and the Town needs proof of that approval before it approves your permit.

We pull the permit and put together the HOA packet with product sheets, color chips and the profile, so the committee can decide on the first pass. Ask any roofer who bids to show you the permit before work starts.

Why Little Elm homeowners call us

  • Our own roll formers and our own crews for standing seam and R-panel, 24 or 26 gauge.
  • Metal lead time is typically 1 to 2 weeks.
  • Certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers.
  • 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
  • BBB A+ rated.
  • Workmanship warranty from 10 years up to lifetime, depending on the job.

See our full metal roofing in Little Elm page, and for nearby lake towns, my post on metal roofs in Lake Dallas and Hickory Creek. We also work in The Colony, Oak Point, Lakewood Village, Hackberry, Frisco and Prosper.

Get a metal roof estimate in Little Elm

Tell me about your house, your HOA and your insurance policy, and I’ll bring real samples of standing seam, stone-coated steel and metal shingles so you can compare them side by side. Every estimate starts with a free digital photo report. Request an estimate or call (817) 733-9228.

Frequently asked questions

Will hail dent a metal roof in Little Elm?

Large hail can dent any metal roof, and I'll tell you that before you sign. Metal doesn't crack, split or shed granules the way an asphalt shingle does, so a dented metal roof usually still keeps water out. Heavier-gauge panels, stone-coated steel and textured or lighter-colored finishes show dents less than thin, smooth, dark panels.

How much hail does Little Elm get?

NOAA's Storm Events Database lists 60 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Little Elm from 2016 through its September 2026 update. They include 2.75-inch hail about 2 miles from town on April 11, 2016, 3.5-inch hail about 4.6 miles away on June 11, 2023, and 2.5-inch hail about 3 miles away on March 14, 2024.

Does homeowners insurance cover hail dents on a metal roof?

It depends on your policy. The Texas Department of Insurance approved optional endorsements (HO-145 for homeowners forms) that exclude cosmetic hail damage to roof coverings that receive an impact-resistance premium credit. If your policy has one, dents that don't let water in may not be covered. Ask your agent how your policy reads before you choose a roof. In Texas you generally have 1 year from the date of loss to file a claim, but check your policy.

Do I need a permit for a metal roof in Little Elm?

Yes. The Town of Little Elm's permit portal lists a roofing permit for repair or replacement of 100 square feet or more of roofing. Permits and contractor registration are handled online through the Town's MyGov system, and if you're in an HOA, the Town may need proof of architectural approval before it approves the permit. We handle the permit.

What gauge do you use, and how long does it take?

We use 24 or 26 gauge and run our own roll formers for standing seam and R-panel, so panels are formed to the exact length of each roof run. Metal lead time is typically 1 to 2 weeks.

Get a free roof inspection

We get on the roof, photograph what we find, and tell you plainly whether you need a repair or a replacement.

Free Roof Replacement Estimate

📞 Call (817) 733-9228

Certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake

Atlas Roofing certified contractor
📞 (817) 733-9228