HOA compliant roof replacement: what it actually means
An HOA compliant roof replacement is one your association has signed off on before the first shingle comes off. In most Texas subdivisions, the deed restrictions (often called CC&Rs) and the architectural guidelines say which roof materials, profiles and colors are allowed, and they require owners to get written approval from an architectural review or architectural control committee (ARC or ACC) before changing the outside of the house. A roof that matches the old one exactly is still often a change in their eyes, because product lines and colors change over the years.
Skipping approval can mean a violation letter, fines under the association's rules, or in the worst case being told to change the roof. Getting it right costs a few pieces of paper and some lead time.
The approval process, step by step
- Read your guidelines first. Get the current architectural guidelines and the application form from your management company or HOA website. Look for the roof section: allowed materials, minimum weight or quality, color families, and whether a sample or product sheet is required.
- Pick the product and color with the rules in hand. We bring samples to your house so you see the color against your brick or stone, in your light.
- Build the packet. We assemble it for you (checklist below).
- Submit and track it. We submit or hand you a ready-to-sign packet, and we follow up so it doesn't sit in a queue.
- Get the approval in writing and keep it with your house records. We file the city permit at the same time where the city requires one, because HOA approval is not a building permit and a building permit is not HOA approval.
- Build exactly what was approved. Same product, same color, same trim and vent colors. If something has to change (a color is discontinued, say), we stop and get the change approved first.
What goes in an HOA roof approval packet
- The association's application form, signed by the owner
- Manufacturer product sheet with the line name, profile and published ratings (impact, wind, fire)
- Color name and a physical sample or a color photo, plus a photo of the product installed on a house
- Drip edge, gutter and vent colors, and any metal accents (for example, a standing seam porch roof)
- A photo of the house as it is today, and for a material change, a simple drawing or mockup of where it goes
- Our company information and proof of insurance if the association asks for it
Texas law on impact-resistant shingles
Texas Property Code §202.011 says a property owners' association can't prohibit or restrict an owner who is otherwise allowed to install shingles from installing shingles designed mainly to resist wind and hail (or to improve heating and cooling efficiency, or generate solar power), as long as, once installed, they resemble the shingles used or allowed in the subdivision, are more durable and of equal or better quality, and match the look of the surrounding properties. In practice, that means an impact-rated Class 4 shingle in an approved style and color is usually an easy approval. It doesn't mean you can skip the application, and it doesn't cover every material. This is general information, not legal advice; read your own deed restrictions or ask a lawyer about a specific dispute.
Materials HOAs commonly review closely
| Material | What committees usually look at | How we help |
|---|---|---|
| Architectural and Class 4 shingles | Profile and color family; often the easiest approval | Samples, product sheet, impact rating |
| Designer slate- and shake-look shingles | Color blend and whether it fits the street | Photos of the line installed, side-by-side samples |
| Standing seam metal | Many guidelines limit or bar metal on the main roof; some allow it on porches and accents or in approved colors | Panel profile, seam spacing, low-gloss color chips, photos of residential installs |
| Synthetic slate and shake | Resemblance to slate or cedar; fire rating | Product sheet, fire and impact ratings, samples |
| Clay and concrete tile | Profile, color and weight | Samples and a structural check where weight is a question |
Our posts on standing seam and HOA review in Southlake and Enviroshake approvals in Westlake and Trophy Club show what committees ask for on those materials.
After a hail storm: approvals and insurance timing
After a big storm, half the neighborhood needs a roof at once. The approval still has to happen, so start it as soon as the adjuster has been out. Texas homeowner claims generally have to be filed within 1 year of the date of loss; check your policy. We document the damage, meet your adjuster on the roof, and have the HOA packet ready so approval isn't what holds the job up. Texas law requires you to pay your insurance deductible, and we never waive it.
If the committee says no
- Ask for the reason in writing, with the guideline section it relies on.
- Ask what would be approved: a different color, a different profile, or the same material in a smaller area.
- Resubmit with the change. Many denials come down to color or missing paperwork, which are the easiest things to fix.
For boards and management companies
If you run the association, see HOA roofing for boards and communities for community-wide inspections and bids, and our city pages for Keller, Fort Worth, Dallas, Arlington, Denton and Weatherford.
Who handles HOA compliant roof replacements in North Texas?
Snow Roofing & Exteriors handles the paperwork and approvals start to finish. Owner Blake Snow has 30 years in the trade in a family roofing business going back 75 years; the company has completed over $80 million in roofing projects, is BBB A+ rated, and has 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. Every inspection comes with a free digital photo report, so you see what we see.
Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.








