Offices in Bridgeport · Decatur · Rhome · Class 3+ impact-rated shingles on every roof Call (817) 733-9228
Snow Roofing & Exteriors logo

Free Roof Replacement Estimate

📞 Call (817) 733-9228
Chico, TX · Barn roofing

Barn Roofing in Chico, TX

Snow Roofing & Exteriors roofs, repairs and builds barns, hay barns, pole barns, equipment sheds and shops around Chico. We form standing seam and R-panel on our own roll formers in 24 or 26 gauge, offer corrugated and PBR panels too, and our own crew does the work. Our Bridgeport office is about 10 road miles (roughly 18 minutes) away. Call (817) 733-9228.

Working barns in ranch and quarry country

Chico is where State Highway 101 meets Farm Road 1810 in northwestern Wise County. The Handbook of Texas says a settler from Chico, California opened a store near Dry Creek in the mid-1870s; the town later billed itself as the oil capital of Wise County, had four large crushed-stone plants at one time, and switched from cotton to peanuts and cantaloupes in the 1950s. It incorporated in 1950. Census estimates show 947 residents in 2020 and about 1,116 in 2025.

Out here the buildings work for a living: hay barns, equipment sheds, covered pens, shops and the occasional old dairy barn. Many have roofs that went on decades ago, galvanized corrugated rusting at the laps or R-panel whose washers have cracked in the sun. Our Bridgeport office is about 10 road miles (roughly 18 minutes) away, so we can look at a leak or a lifted panel quickly. See also our guide to condensation control under a metal roof.

Which metal goes on which building

A barn roof isn't one product. What goes on a hay barn in Chico isn't always what belongs on a horse barn or a shop you can see from the back porch. Here's how we match the panel to the building:

BuildingWhat we usually recommendWhy
Hay barn, equipment barn, loafing shedR-panel or PBR, 24 or 26 gaugeStrong ribs that span open purlins, quick to install, easy to repair a panel at a time
Pole barn or post-frame buildingR-panel or PBR, with closures and trim made for the panelThe screw pattern at the eaves, rakes and ridge is what holds it down in a storm
Horse barn, stable or covered arenaR-panel, PBR or standing seam, with ventilation and condensation plannedAnimals add moisture to the air, and bare steel sweats over it
Show barn, or a barn in full view of the houseStanding seamHidden fasteners, clean lines and no exposed screws to re-tighten later
Barndominium or barn with living spaceStanding seam or R-panel over a planned insulation and vapor layerSee barndominium, shop and ag roofs
Sheds, carports, boat and RV coversCorrugated, R-panel or PBRMatches older buildings and keeps small jobs simple

We form standing seam and R-panel on our own roll formers in 24 or 26 gauge, and we also offer corrugated and PBR panels. Metal lead time is typically 1 to 2 weeks. We don't post prices, because building size, framing condition, tear-off and trim change the number a lot. You get a written price for your building.

Re-screw, re-panel or re-roof?

Most old barn roofs don't have to come off. We walk the roof where it's safe, fly a drone where it isn't, look at the purlins from inside, and show you the photos behind our call:

  • Re-screw: the panels are sound, but rubber washers have cracked in the sun or screws have backed out. New fasteners, one size up where the holes have worn oval, can add years to a roof that's otherwise fine.
  • Partial re-panel: some panels are rusted through, punctured by hail or bent by wind, usually along the eaves, the rakes or an old lean-to. We replace those panels and fix the trim and closures around them.
  • Full re-roof: rust is widespread, the old panels are too thin to hold a screw, or the barn is being enclosed or finished for living space and needs an insulation and vapor plan. See metal roof repair and restoration.

Whichever it is, we check the framing first. A new roof on rotted or undersized purlins is money spent twice.

Wind and hail around Chico

For barns around Chico, wind does most of the damage. NOAA's Storm Events Database records:

  • May 28, 2021: a large area of wind damage, with a 74 mph estimate, tracked across northern Wise County near Chico. Along the path, trees and limbs came down and sheet metal was torn off sheds.
  • March 18, 2020: about three miles from Chico, three metal and wood outbuildings had roof damage, and the same storm brought 75 to 80 mph straight-line winds to Alvord, where several sheds at a business were damaged or rolled.
  • March 18, 2020, EF-0 tornado: near Lake Bridgeport, about six and a half miles away, it uprooted and snapped dozens of trees and damaged two mobile homes.
  • July 27, 2021: roofs were partly blown off homes near Lake Bridgeport, about five miles away.

Hail is less frequent here than in the south half of the county, but it comes. NOAA lists 8 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Chico from 2016 through the September 2026 update, including 2-inch hail on April 17, 2019, under two miles from the center of town, golf-ball-size hail on May 9, 2024 about three miles away, and 2.75-inch hail at the Bridgeport airport on April 25, 2026.

What wind does to a barn roof

A house is closed on all sides. Most barns aren't. Wind blowing into an open bay or a big door pushes up on the underside of the roof while it pulls on the top, so a barn roof takes load from both sides at once. That's why the failures we see follow a pattern:

  • The edges go first. Eaves, rakes and the ridge carry the most uplift. If a panel is going to peel, it usually starts there, then the wind gets under the next one.
  • Screws loosen before they let go. Years of heat and cold work exposed fasteners loose. A loose screw leaks first, then the panel starts to lift.
  • Trim and closures matter. Missing foam closures and loose rake trim let wind and wasps in and give a gust something to grab.
  • Old lean-tos are weak links. Additions framed lighter than the main barn, or lapped onto it badly, are where many barn roofs start to fail.

When we roof or repair a barn, the fastener spacing at the edges, the trim attachment and the condition of the purlins get the most attention, because that's what keeps the roof on the building.

Chico permits, and barns on county land

Inside the city limits, the City of Chico's residential permit application covers accessory structures, and the fee schedule in the city's code of ordinances lists a storage building permit at $25, a workshop at $50 for the building (plus $35 each for electrical and plumbing), a residential re-roofing permit at $50, and a $50 registration for general contractors. Those are city fees, not our price. We check with the city at (940) 644-2435 before we start.

Most barns with a Wise County address are outside any city limits. Wise County's own FAQ says the county does not require general building permits; inside a city or its extraterritorial jurisdiction, City Hall is the place to ask, and septic permits are required either way through Wise County Public Works at 940-627-9332. No county permit doesn't mean no rules: a barn roof still goes on to the panel maker's instructions, and a new barn still has to be built for the wind it will see.

Old galvanized barns, and when to keep the look

Plenty of barns around Chico wear old galvanized corrugated, and some owners would rather keep that look than switch to a painted color. New corrugated or bare-metal-finish R-panel looks at home on an old barn, and our R-panel is 24 or 26 gauge, heavier than the thin panel on many old buildings. Where only the fasteners have failed, a re-screw with new washers may be all the barn needs for now. We'll show you the photos and the options side by side before you decide.

New barns, built by our own crews

We don't only roof barns, we build them. For a new barn, pole barn, horse barn, shop or ag building, we can bring in an architect to spec the project, or build to the specs and plans you already have. Our own crews do the work from start to finish, and the roof can go on in a color that matches the house and the other buildings so the property looks like one place.

Details that decide whether a barn roof lasts

  • Condensation control if the barn is enclosed, stores hay, houses animals or has any conditioned space. A vapor barrier or insulation under the panels and ventilation that suits the use keep it from "raining" inside. See condensation control under metal.
  • Ridge and eave closures that fit the panel profile, so wind-driven rain, birds and wasps stay out.
  • Flashing where buildings meet: lean-tos, porches, a shop wall or a stall row added later.
  • Gutters and drainage where water would otherwise sheet onto a pad, an arena entry or a doorway. See gutters.
  • Skylight panels replaced with the roof, because old clear panels turn brittle and crack long before the steel wears out.
  • Color match across the house, barn and shop.

How a barn roof job runs with us

  1. Inspection and free digital photo report: panels, fasteners, trim, purlins and framing, with measurements. You see what we see.
  2. Written options: re-screw, re-panel or re-roof, with the panel, gauge, color, trim and fastener plan spelled out.
  3. Paperwork: we check whether your barn is inside city limits or on county land, then file what applies.
  4. Panels formed for your building on our own roll formers, cut to the length of each roof plane so long runs don't need mid-slope laps.
  5. Install by our own crew, with the edges, ridge and penetrations detailed for wind.
  6. Clean-up and walk-through: a magnet sweep for screws and scrap, so nothing ends up in a hoof or a tire, and your warranty in writing.

Storm damage and insurance on barns

Hail dents and punctures panels and cracks old washers, and wind lifts edges and tears trim. Whether a barn is covered, and for how much, depends on your policy: some cover farm and ranch buildings fully, some cover them for less, and some treat cosmetic dents differently from leaks. Our photo report separates storm damage from age and rust, which is what an adjuster needs to see. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.

Who roofs and builds barns in Chico?

Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:

  • 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
  • Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
  • 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
  • Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
  • Our own crew, working about 10 road miles (roughly 18 minutes) from Chico out of our Bridgeport office.
  • Snow Roofing & Exteriors is BBB A+ rated.

Photos

The barn image at the top is an illustration. The photos below are real metal roofs our crews installed on houses, shown so you can see our panel, trim and seam work up close. We don't have barn job photos from Chico on file, so we don't show any. We never show a street or address.

We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. More nearby: barn roofing in Bridgeport, barn roofing in Paradise, barn roofing in Decatur, metal roofing in Wise County and our Chico roofing page.

Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.

Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.

Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.

Request a free inspection or call (817) 733-9228. Small repairs are welcome too.

Frequently asked questions

Who roofs barns in Chico, TX?

Snow Roofing & Exteriors roofs, repairs and builds barns, hay barns, pole barns and shops around Chico. It is a family roofing business that goes back 75 years, owner Blake Snow has 30 years in the business, the company has completed over $80 million in roofing projects, and it has 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. Standing seam and R-panel are formed on its own roll formers in 24 or 26 gauge. The Bridgeport office is about 10 road miles (roughly 18 minutes) away. Call (817) 733-9228.

Do I need a permit to re-roof a barn in Chico?

Inside the city limits, Chico’s fee schedule lists a residential re-roofing permit at $50, a storage building at $25 and a workshop at $50 for the building. Outside the city limits, Wise County does not require general building permits. We check which side of the line your barn is on first.

Does Wise County require a permit for a new barn?

Wise County says it does not require general building permits. Inside a city or its extraterritorial jurisdiction, check with City Hall. Septic permits are required countywide through Wise County Public Works. We check which side of the line your property is on before we start.

Has wind damaged sheds and barns around Chico?

Yes. NOAA notes sheet metal torn off sheds across northern Wise County on May 28, 2021, and roof damage to three metal and wood outbuildings about three miles from Chico on March 18, 2020.

Can you keep the old galvanized look on my barn?

Yes. New corrugated or bare-metal-finish R-panel looks at home on an older barn. If the barn sits near the house, a painted panel in a matching color is the other common choice.

R-panel or PBR for my barn?

Both are exposed-fastener ribbed panels and both work on barns. PBR adds a purlin-bearing leg at the side lap for more bearing where panels overlap. We pick based on your framing, span and how the building is used.

Can you fix my old barn roof instead of replacing it?

Often, yes. If the panels are sound and only the screws and washers have failed, a re-screw can buy years. If some panels are rusted or damaged, we replace those. We recommend a full re-roof only when rust is widespread, the panels are too thin to hold a screw, or the barn is being enclosed.

Do you build new barns or only roof them?

Both. We can bring in an architect to spec a new barn, pole barn, horse barn or ag building, or build to your existing specs and plans. Our own crews do the building from start to finish.

What gauge metal do you put on a barn?

Our standing seam and R-panel roofs are 24 or 26 gauge, formed on our own roll formers. We also offer corrugated and PBR panels.

Why does my metal barn roof drip on the inside?

Usually that is condensation: warm, humid air meeting cold steel. It is fixed with a vapor barrier or insulation under the panels and ventilation that fits how the building is used.

How soon can you start a barn roof?

Metal lead time is typically 1 to 2 weeks because we form standing seam and R-panel on our own roll formers. Install time depends on the building size, tear-off and weather.

Will insurance pay for a hail-damaged barn roof?

It depends on your policy. Some policies cover farm and ranch buildings fully, some for less, and some treat cosmetic dents differently from leaks. We document the damage with photos and meet your adjuster. In Texas you generally have 1 year from the date of loss to file; check your policy.

What warranty comes with a barn roof?

Our workmanship warranty is from 10 years up to lifetime, depending on the job, plus the manufacturer’s warranty on the panel and finish, in writing.

Get a free roof inspection

We get on the roof, photograph what we find, and tell you plainly whether you need a repair or a replacement.

Free Roof Replacement Estimate

📞 Call (817) 733-9228

Certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake

Atlas Roofing certified contractor
📞 (817) 733-9228