Offices in Bridgeport · Decatur · Rhome · Class 3+ impact-rated shingles on every roof Call (817) 733-9228
Snow Roofing & Exteriors logo

Free Roof Replacement Estimate

📞 Call (817) 733-9228
Paradise, TX · Barn roofing

Barn Roofing in Paradise, TX

Snow Roofing & Exteriors roofs, repairs and builds horse barns, covered arenas, hay barns, pole barns and shops around Paradise. We form standing seam and R-panel on our own roll formers in 24 or 26 gauge, offer corrugated and PBR panels too, and our own crew does the work. Our Bridgeport office is about 4.5 road miles (roughly 13 minutes) away. Call (817) 733-9228.

Horse country next door to our Bridgeport office

Paradise is on State Highway 114 in southwestern Wise County. The Handbook of Texas says it began in the early 1870s as a store called Eldorado, was renamed Paradise Prairie for the wildflowers around it, and moved a mile northeast to the Rock Island tracks in 1893. Census estimates show it growing from 490 residents in 2020 to about 807 in 2025, mostly new homes on acreage with the barns and shops that go with them.

Around Paradise you see horse barns, covered arenas, hay barns and equipment sheds, plus barndominiums and shops going up on new tracts. Horse barns are their own problem: animals put moisture in the air, and bare steel over a stall row sweats unless the roof has a vapor plan. Paradise is also one of the closest towns to us, about 4.5 road miles (roughly 13 minutes) from our Bridgeport office, so a leak or a lifted panel after a storm doesn't wait long. See our guide to metal roofs for horse barns and arenas around Paradise.

Which metal goes on which building

A barn roof isn't one product. What goes on a hay barn in Paradise isn't always what belongs on a horse barn or a shop you can see from the back porch. Here's how we match the panel to the building:

BuildingWhat we usually recommendWhy
Hay barn, equipment barn, loafing shedR-panel or PBR, 24 or 26 gaugeStrong ribs that span open purlins, quick to install, easy to repair a panel at a time
Pole barn or post-frame buildingR-panel or PBR, with closures and trim made for the panelThe screw pattern at the eaves, rakes and ridge is what holds it down in a storm
Horse barn, stable or covered arenaR-panel, PBR or standing seam, with ventilation and condensation plannedAnimals add moisture to the air, and bare steel sweats over it
Show barn, or a barn in full view of the houseStanding seamHidden fasteners, clean lines and no exposed screws to re-tighten later
Barndominium or barn with living spaceStanding seam or R-panel over a planned insulation and vapor layerSee barndominium, shop and ag roofs
Sheds, carports, boat and RV coversCorrugated, R-panel or PBRMatches older buildings and keeps small jobs simple

We form standing seam and R-panel on our own roll formers in 24 or 26 gauge, and we also offer corrugated and PBR panels. Metal lead time is typically 1 to 2 weeks. We don't post prices, because building size, framing condition, tear-off and trim change the number a lot. You get a written price for your building.

Re-screw, re-panel or re-roof?

Most old barn roofs don't have to come off. We walk the roof where it's safe, fly a drone where it isn't, look at the purlins from inside, and show you the photos behind our call:

  • Re-screw: the panels are sound, but rubber washers have cracked in the sun or screws have backed out. New fasteners, one size up where the holes have worn oval, can add years to a roof that's otherwise fine.
  • Partial re-panel: some panels are rusted through, punctured by hail or bent by wind, usually along the eaves, the rakes or an old lean-to. We replace those panels and fix the trim and closures around them.
  • Full re-roof: rust is widespread, the old panels are too thin to hold a screw, or the barn is being enclosed or finished for living space and needs an insulation and vapor plan. See metal roof repair and restoration.

Whichever it is, we check the framing first. A new roof on rotted or undersized purlins is money spent twice.

Wind and hail around Paradise

Paradise has had more than its share of tornadoes. NOAA's Storm Events Database records:

  • December 13, 2022, EF-2 tornado: it started southeast of Paradise, about three miles from town, and tracked northeast to southeast of Decatur, damaging homes and trees along county roads.
  • March 21, 2022, EF-0 tornado: it formed southeast of Paradise near County Road 4393, damaged an outhouse and a carport, then damaged several homes and outbuildings along a five-mile track.
  • January 10, 2020, EF-0 tornado: west-northwest of Boyd, about five miles from Paradise, it destroyed a barn and scattered the debris about a quarter mile.
  • May 17, 2025: reports relayed numerous trees down in and around Paradise, with some outbuildings damaged.
  • April 28, 2026, EF-0 tornado: near Cottondale, about five miles south, NOAA notes tree, shingle and outbuilding roof damage with winds estimated at 80 mph.

Hail: NOAA lists 14 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Paradise from 2016 through the September 2026 update, including 1.75-inch hail at Paradise on March 26, 2017, about half a mile from the center of town, 2-inch hail near Paradise the same night, and most recently 1.75-inch hail near Paradise on April 28, 2026.

What wind does to a barn roof

A house is closed on all sides. Most barns aren't. Wind blowing into an open bay or a big door pushes up on the underside of the roof while it pulls on the top, so a barn roof takes load from both sides at once. That's why the failures we see follow a pattern:

  • The edges go first. Eaves, rakes and the ridge carry the most uplift. If a panel is going to peel, it usually starts there, then the wind gets under the next one.
  • Screws loosen before they let go. Years of heat and cold work exposed fasteners loose. A loose screw leaks first, then the panel starts to lift.
  • Trim and closures matter. Missing foam closures and loose rake trim let wind and wasps in and give a gust something to grab.
  • Old lean-tos are weak links. Additions framed lighter than the main barn, or lapped onto it badly, are where many barn roofs start to fail.

When we roof or repair a barn, the fastener spacing at the edges, the trim attachment and the condition of the purlins get the most attention, because that's what keeps the roof on the building.

Paradise permits, and barns on county land

Inside the city limits, Paradise permits barns and shops as auxiliary buildings. The city's fee schedule (adopted February 2023) lists an auxiliary building permit at $0.35 per square foot, plus a $50 administrative fee on every residential permit, and it doubles the fee for work done without a permit. Those are city fees, not our price. For a re-roof or a new barn inside town, we confirm what's needed with City Hall at 940-969-2114 first.

Most barns with a Wise County address are outside any city limits. Wise County's own FAQ says the county does not require general building permits; inside a city or its extraterritorial jurisdiction, City Hall is the place to ask, and septic permits are required either way through Wise County Public Works at 940-627-9332. No county permit doesn't mean no rules: a barn roof still goes on to the panel maker's instructions, and a new barn still has to be built for the wind it will see.

Covered arenas and long, open buildings

Covered arenas and big equipment barns take wind hardest: wide open sides, long roof runs and nothing to break a gust. On those we pay the most attention to the fastener pattern at the eaves and rakes, the condition of the purlins, and panel length. Because we form panels on our own roll formers, we cut each one to the full length of the roof plane, so a long run doesn't need laps halfway up the slope where water and wind can get in.

New barns, built by our own crews

We don't only roof barns, we build them. For a new barn, pole barn, horse barn, shop or ag building, we can bring in an architect to spec the project, or build to the specs and plans you already have. Our own crews do the work from start to finish, and the roof can go on in a color that matches the house and the other buildings so the property looks like one place.

Details that decide whether a barn roof lasts

  • Condensation control if the barn is enclosed, stores hay, houses animals or has any conditioned space. A vapor barrier or insulation under the panels and ventilation that suits the use keep it from "raining" inside. See condensation control under metal.
  • Ridge and eave closures that fit the panel profile, so wind-driven rain, birds and wasps stay out.
  • Flashing where buildings meet: lean-tos, porches, a shop wall or a stall row added later.
  • Gutters and drainage where water would otherwise sheet onto a pad, an arena entry or a doorway. See gutters.
  • Skylight panels replaced with the roof, because old clear panels turn brittle and crack long before the steel wears out.
  • Color match across the house, barn and shop.

How a barn roof job runs with us

  1. Inspection and free digital photo report: panels, fasteners, trim, purlins and framing, with measurements. You see what we see.
  2. Written options: re-screw, re-panel or re-roof, with the panel, gauge, color, trim and fastener plan spelled out.
  3. Paperwork: we check whether your barn is inside city limits or on county land, then file what applies.
  4. Panels formed for your building on our own roll formers, cut to the length of each roof plane so long runs don't need mid-slope laps.
  5. Install by our own crew, with the edges, ridge and penetrations detailed for wind.
  6. Clean-up and walk-through: a magnet sweep for screws and scrap, so nothing ends up in a hoof or a tire, and your warranty in writing.

Storm damage and insurance on barns

Hail dents and punctures panels and cracks old washers, and wind lifts edges and tears trim. Whether a barn is covered, and for how much, depends on your policy: some cover farm and ranch buildings fully, some cover them for less, and some treat cosmetic dents differently from leaks. Our photo report separates storm damage from age and rust, which is what an adjuster needs to see. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.

Who roofs and builds barns in Paradise?

Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:

  • 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
  • Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
  • 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
  • Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
  • Our own crew, working about 4.5 road miles (roughly 13 minutes) from Paradise out of our Bridgeport office.
  • Snow Roofing & Exteriors is BBB A+ rated.

Photos

The barn image at the top is an illustration. The photos below are real metal roofs our crews installed on houses, shown so you can see our panel, trim and seam work up close. We don't have barn job photos from Paradise on file, so we don't show any. We never show a street or address.

We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. More nearby: barn roofing in Bridgeport, barn roofing in Decatur, barn roofing in Boyd, metal roofing in Wise County and our Paradise roofing page.

Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.

Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.

Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.

Request a free inspection or call (817) 733-9228. Small repairs are welcome too.

Frequently asked questions

Who roofs barns in Paradise, TX?

Snow Roofing & Exteriors roofs, repairs and builds horse barns, arenas, hay barns and shops around Paradise. It is a family roofing business that goes back 75 years, owner Blake Snow has 30 years in the business, the company has completed over $80 million in roofing projects, and it has 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. Standing seam and R-panel are formed on its own roll formers in 24 or 26 gauge. The Bridgeport office is about 4.5 road miles (roughly 13 minutes) away. Call (817) 733-9228.

Do I need a permit for a barn in Paradise?

Inside the city limits, Paradise permits barns and shops as auxiliary buildings; its fee schedule lists $0.35 per square foot plus a $50 administrative fee, and doubles the fee for work done without a permit. Outside the city limits, Wise County does not require general building permits.

Does Wise County require a permit for a new barn?

Wise County says it does not require general building permits. Inside a city or its extraterritorial jurisdiction, check with City Hall. Septic permits are required countywide through Wise County Public Works. We check which side of the line your property is on before we start.

Have tornadoes hit near Paradise?

Yes. NOAA lists an EF-2 tornado on December 13, 2022 that started southeast of Paradise, an EF-0 on March 21, 2022 that damaged homes and outbuildings southeast of town, and an EF-0 near Cottondale on April 28, 2026 with outbuilding roof damage.

Why does my horse barn roof drip?

Usually it’s condensation. Horses add moisture to the air, and warm, damp air condenses on cold steel. A vapor barrier or insulation under the panels and ventilation that suits the building fix it.

R-panel or PBR for my barn?

Both are exposed-fastener ribbed panels and both work on barns. PBR adds a purlin-bearing leg at the side lap for more bearing where panels overlap. We pick based on your framing, span and how the building is used.

Can you fix my old barn roof instead of replacing it?

Often, yes. If the panels are sound and only the screws and washers have failed, a re-screw can buy years. If some panels are rusted or damaged, we replace those. We recommend a full re-roof only when rust is widespread, the panels are too thin to hold a screw, or the barn is being enclosed.

Do you build new barns or only roof them?

Both. We can bring in an architect to spec a new barn, pole barn, horse barn or ag building, or build to your existing specs and plans. Our own crews do the building from start to finish.

What gauge metal do you put on a barn?

Our standing seam and R-panel roofs are 24 or 26 gauge, formed on our own roll formers. We also offer corrugated and PBR panels.

How soon can you start a barn roof?

Metal lead time is typically 1 to 2 weeks because we form standing seam and R-panel on our own roll formers. Install time depends on the building size, tear-off and weather.

Will insurance pay for a hail-damaged barn roof?

It depends on your policy. Some policies cover farm and ranch buildings fully, some for less, and some treat cosmetic dents differently from leaks. We document the damage with photos and meet your adjuster. In Texas you generally have 1 year from the date of loss to file; check your policy.

What warranty comes with a barn roof?

Our workmanship warranty is from 10 years up to lifetime, depending on the job, plus the manufacturer’s warranty on the panel and finish, in writing.

Get a free roof inspection

We get on the roof, photograph what we find, and tell you plainly whether you need a repair or a replacement.

Free Roof Replacement Estimate

📞 Call (817) 733-9228

Certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake

Atlas Roofing certified contractor
📞 (817) 733-9228