Snow Roofing & Exteriors logo Call (817) 733-9228
Blog

GAF EverGuard TPO vs. EverGuard Extreme in Denton and Lewisville: Is the Upgrade Worth It on Your Commercial Roof?

By Blake Snow, owner ·

Illustration of a bright white TPO membrane roof on a single-story retail building with a parking lot
Illustration

Brands in this article

  • GAF logo

Denton and Lewisville have a lot of white roofs: warehouses and distribution buildings along I-35 and I-35E, medical and office buildings, schools, churches and retail centers. When a bid comes in for GAF TPO, it often lists either EverGuard or EverGuard Extreme, and the price gap between them isn’t explained. This post is about that one decision: is the Extreme upgrade worth it on your building?

I’m Blake Snow. I’ve been roofing for 30 years, and we’re certified with GAF. This isn’t a “what is TPO” post. It’s a straight comparison of GAF’s two TPO lines using GAF’s own data sheets, plus how I’d choose between them on a real Denton or Lewisville roof.

The short answer

  • Pick EverGuard Extreme when you’ll own the building a long time, want the longest guarantee option at a given thickness, or the roof will carry solar or sees extra heat (GAF says Extreme is great for high-heat and solar applications).
  • Pick standard EverGuard when you want a color other than white, want the widest choice of roll sizes, or the budget and hold period don’t justify the upgrade.
  • Same install methods. Both can be mechanically attached, induction welded or adhered. The crew, the welders and most accessories work the same way.

The numbers, side by side

From GAF’s EverGuard TPO data sheet (COMEG876) and EverGuard Extreme TPO data sheet (COMEG994):

EverGuard TPO (standard)EverGuard Extreme TPO
Thicknesses45, 60, 80 mil (also 60 mil minimum)50, 60, 70, 80 mil
Guarantee, eligible systemsUp to 20 yrs (45) / 25 yrs (60) / 30 yrs (80)Up to 25 yrs (50) / 30 yrs (60, 70) / 35 yrs (80)
Weather resistance, ASTM G155 at 340 nm (ASTM D6878 minimum 10,080 kJ)>20,000 kJ (45) / >25,000 kJ (60 and 80)>46,000 kJ (50) / >56,000 kJ (60, 70, 80)
Heat aging, ASTM D573 (8 weeks at 275°F)PassPass
Puncture, FTM 101C>350 lb (45) / >380 lb (60, 80)437 lb (50) to 524 lb (80)
White solar reflectance, initial / 3-yr aged0.81 / 0.750.83 / 0.72
White SRI, initial / 3-yr aged101 / 92104 / 90
ColorsWhite plus many colors (gray, tan, Energy Tan, Energy Gray, Slate Gray, Dark Bronze and more)White
Roll widths on the data sheet12’, 10’, 8’, 6’, 5’ (100’ long)10’ and 5’ (100’ long)
GAF plants listedMount Vernon IN, New Columbia PA, Cedar City UT, Gainesville TX, Valdosta GAMount Vernon IN, Gainesville TX

GAF says values are approximate, subject to normal manufacturing variation, and not guaranteed. Some aged reflectance values are CRRC “rapid ratings,” which are lab-aged values that get replaced by real three-year values later. Guarantees are for qualified systems, and additional requirements apply.

A couple of things jump out:

  1. The real gap is weathering. In GAF’s weather-resistance test, Extreme’s listed values run roughly double the standard sheet at the same thickness. That’s the “enhanced weathering package” you’re paying for.
  2. Reflectivity is close. Don’t pick Extreme just for a whiter roof. The aged numbers are close enough that it shouldn’t drive the decision.

The guarantee ladder (this is where the money is)

GAF lines the two products up so each Extreme thickness reaches a guarantee tier a standard sheet needs more thickness for:

  • Extreme 50 mil gets the guarantee coverage of a standard 60 mil TPO (up to 25 years). GAF adds that Extreme 50 mil can be installed without T-joint patches and still qualify for its 25-year guarantee, unlike 60 mil TPO.
  • Extreme 60 mil reaches up to 30 years on eligible adhered and induction-welded systems.
  • Extreme 70 mil is eligible for a 30-year guarantee, the same as a standard 80 mil.
  • Extreme 80 mil is eligible for up to 35 years.

So the honest comparison is often Extreme 50 vs. standard 60, or Extreme 70 vs. standard 80, not same-thickness to same-thickness. We price it that way so you can see what each year of guarantee costs.

On our commercial bids we also offer 10-year and 20-year NDL (No Dollar Limit) warranty options at different prices, and we list which GAF product, thickness and attachment sits behind each one. Our workmanship warranty runs from 10 years up to lifetime, depending on the job.

Solar, reflective walls and “high heat”: why it matters here

GAF’s Extreme page says it’s ideal for applications, including high-heat and solar applications, where you want the best long-term performance. In Denton and Lewisville I think about that in three situations:

  • Solar going on the roof, now or later. Panels, racking and the crews that service them stay on the roof for decades. Pulling a solar array to fix a roof is expensive, so the membrane under it should last at least as long as the array. That’s an Extreme conversation.
  • Low roofs next to tall glass or light-colored walls. Office and medical buildings often have a low roof section beside a taller wall that bounces sun back down on it.
  • Roofs with a lot of rooftop equipment and dark metal. More heat, more foot traffic, more details.

None of those are a guarantee that standard EverGuard will fail early. They’re the cases where the longer weathering and guarantee options are easiest to justify.

When standard EverGuard is the smarter buy

  • You need a color. If the HOA, the owner or the architect wants tan, gray or a darker color, standard EverGuard is where GAF offers it. Extreme’s data sheet lists white.
  • You want 12-foot rolls. GAF lists 12’ rolls for standard EverGuard, which means fewer seams on a big open warehouse roof. Extreme’s data sheet lists 10’ and 5’ rolls.
  • Shorter hold period. If you’re selling in a few years, a well-installed 60 mil standard EverGuard with the right warranty is often all the market will pay for.
  • Budget with a hard ceiling. Standard EverGuard at 60 or 80 mil is a solid roof. GAF says it endures 2 to 2.5 times the industry standard in the ASTM D6878 weather-resistance test, depending on thickness.

Which one I’d pick, building by building

Your Denton or Lewisville buildingWhat I’d usually priceWhy
Distribution or warehouse, long hold, white roof fineExtreme 60 or 70 mil, plus standard 60 or 80 for comparisonLonger guarantee tiers per mil
Building getting solarExtreme 60 to 80 mil, adhered or induction weldedGAF’s high-heat and solar positioning; roof under panels should outlast them
Office or medical building with low roofs under tall wallsExtreme on the low roofsExtra reflected heat
Retail center, tan or gray roof requiredStandard EverGuard in the required colorExtreme lists white only
Big open warehouse, budget-driven, short holdStandard EverGuard 60 mil, 12’ rollsFewer seams, lower cost
School or church, long ownershipExtreme 60 mil or standard 80 mil, priced side by sideSame guarantee tier, compare cost

These are starting points. The deck, the insulation, the wind zone and your budget decide the final spec. For other low-slope options, see our TPO vs. modified vs. coating guide and our PVC roofing page for buildings with grease or chemical exhaust.

What to ask before you sign a GAF TPO bid

  1. Is it EverGuard or EverGuard Extreme? What thickness?
  2. What guarantee term, and is it the term GAF lists for that thickness and attachment method?
  3. Is the guarantee NDL?
  4. Mechanically attached, induction welded or adhered? With what adhesive?
  5. Is there a cover board? Which one?
  6. If you’re quoting Extreme 50 mil, are T-joint patches being skipped, and is that within GAF’s requirements?
  7. Is solar planned? If so, how will the racking attach and be flashed, and does it affect the guarantee?
  8. What roll width, and what color?
  9. How are walkways and rooftop service paths handled?
  10. Who pulls the permit, and who schedules the inspection?

After a storm

Get the roof inspected and documented before anyone patches it, and keep vendors off damaged areas. Our FAA-certified drone pilot can fly a big roof quickly (see our drone inspection page), and our commercial hail claims page covers what to record. In Texas you generally have 1 year from the date of loss to file a claim, but check your policy.

Talk to us about a GAF TPO roof in Denton or Lewisville

We install GAF EverGuard and EverGuard Extreme TPO on commercial buildings across Denton, Lewisville, Flower Mound, Corinth, Highland Village, Little Elm and Argyle. We’re certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. We’re fully insured, BBB A+ rated, and references are available on request.

See our Denton commercial roofing and TPO roofing pages, use the estimate form below, or call (817) 733-9228.

Frequently asked questions

What's the difference between GAF EverGuard TPO and EverGuard Extreme TPO?

Both are GAF's reinforced, heat-welded TPO membranes and install the same ways (mechanically attached, induction welded or adhered). EverGuard Extreme adds what GAF calls an enhanced weathering package. GAF says it's great for high-heat and solar applications, and it qualifies for longer guarantees at each thickness: up to 35 years at 80 mil, compared with up to 30 years for standard EverGuard at 80 mil.

What thicknesses do EverGuard and EverGuard Extreme come in?

GAF's data sheets list standard EverGuard TPO in 45, 60 and 80 mil (also a minimum-60-mil version) and EverGuard Extreme in 50, 60, 70 and 80 mil.

How long are the GAF guarantees on each?

For eligible systems, GAF lists standard EverGuard at up to 20 years (45 mil), 25 years (60 mil) and 30 years (80 mil). It lists EverGuard Extreme at up to 25 years (50 mil), 30 years (60 and 70 mil) and 35 years (80 mil). GAF notes the 60-mil Extreme 30-year term is for eligible adhered and induction-welded systems, and additional requirements apply to all terms.

Is EverGuard Extreme worth it on a Denton warehouse?

It depends on how long you'll own the building and what's on the roof. If you plan to hold it a long time, want a longer guarantee option, or the roof will carry solar or sit under reflective walls, Extreme is worth pricing. If you need a color other than white, want 12-foot rolls, or are selling in a few years, standard EverGuard is often the better value. We price both so you can see the difference.

Does EverGuard Extreme come in colors?

GAF's EverGuard Extreme data sheet lists white. Standard EverGuard TPO is offered in many colors, including white, gray, tan, Energy Tan, Energy Gray and darker architectural colors.

Are you certified with GAF?

Yes. We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. On commercial roofs we offer 10-year and 20-year NDL warranty options, and our workmanship warranty runs from 10 years up to lifetime, depending on the job.

Hail hit our Lewisville building. How long do we have to file a claim?

In Texas it's generally 1 year from the date of loss, but check your policy. Get the roof inspected and documented before any repairs.

Get a free roof inspection

We get on the roof, photograph what we find, and tell you plainly whether you need a repair or a replacement.

Get a free estimate

Tell us how to reach you. Blake or the team will call you back.

Or call (817) 733-9228