Outdoor kitchens in Frisco
Frisco sits on State Highway 289 and Farm Road 720 about 30 miles north of Dallas, mostly in Collin County with a part in Denton County, and Census estimates show about 237,000 residents. Most of its houses were built in the last 25 years on subdivision lots with an HOA, many with an alley behind and a pool taking up much of the backyard. That makes the setbacks the first thing we check on a Frisco outdoor kitchen or pool house: the city's zoning chart treats alley lots, open-space lots and corner lots differently.
Who builds outdoor kitchens in Frisco?
Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:
- 75 years as a family roofing and exterior business, and 30 years in the trade for owner Blake Snow.
- 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
- Snow Roofing & Exteriors is BBB A+ rated, fully insured, with references available on request.
- Our own crews, who frame, roof, side, trim and finish outdoor kitchens and covers from start to finish.
- One company for the whole outside of the house: roofs, gutters, siding, windows, soffit and fascia, paint, and outdoor living.
- A workmanship warranty from 10 years up to lifetime, depending on the job, in writing.
Four ways to put a roof over an outdoor kitchen
Most Frisco outdoor kitchens end up as one of these. Which one fits depends on the back of the house, where the sun sets, how close the pool or the fence line is, and what the city allows on your lot.
| Layout | Good for | What to watch |
|---|---|---|
| Attached cover, tied into the house roof | Short walk from the kitchen door, one continuous roofline | The tie-in is the most common leak spot on any patio roof, and attaching can change how the city treats the structure |
| Freestanding pavilion | Putting the grill where the view, the pool or the shade is best | Footings, wind bracing and setbacks from the property lines |
| Cover over an existing island | Owners who already have counters and a grill out in the sun | Whether the island can stay where it is, and how smoke will clear |
| Kitchen built into a pool house | Big backyards, entertaining, a bath and storage under one roof | Plumbing to the sewer, pool setbacks and, for enclosed buildings, wall material rules |
We plan the cover and the kitchen together, so the posts land where the counters need them, the vent hood has a clear path, and the roof drains away from the cooking area and the pool deck.
City of Frisco permits for outdoor kitchens and covers
Frisco's residential submittal requirements put both under an online "Other Home Improvements" permit:
- Patio covers, arbors and gazebos: your survey marked with the distances to every property line, framing drawings with a front and side elevation, material list, post and beam sizes, and a footer detail. If the cover attaches to the house, the bracket type, bolt size and length, and what it attaches to. Aluminum, steel or vinyl covers have to be engineered.
- Outdoor kitchens and grills: the survey, a front elevation with dimensions, materials and footers, the list of appliances, and whether the grill runs on natural gas or propane. Sinks and ice chests drain to the sanitary sewer.
- Outdoor fireplaces: the elevation with height, gas or wood-burning, and the manufacturer's warranty for a firebox insert.
Many Frisco subdivisions require HOA approval too, and the city reminds owners to get it. We send the HOA package and the permit together so neither one holds up the other.
Where it can go on a Frisco lot
Frisco's zoning ordinance (Subsection 4.06 and its accessory structure chart) sets the placement rules for residential lots:
- No accessory structure in an easement, none in the side yard setback between the front and rear setback lines, and none forward of the face of the house.
- On a lot with no alley or open space behind it, the rear setback is at least 10 feet. On an alley lot, a structure 8 feet tall or less can sit 3 feet from the rear line if a solid fence or wall of the same height screens it.
- A structure in the back of the lot that's closer than 10 feet to the house takes the house's own rear setback.
- An outdoor kitchen or fireplace keeps the 10-foot rear setback, but a 100 percent masonry one no taller than 8 feet can come to 10 feet from the rear line. On a corner lot, a kitchen can reach to 7 feet from the side line, at no more than 42 inches tall in the side yard.
- A fire pit sits at least 15 feet from the house and 10 feet from anything combustible.
- Attached patio covers and arbors listed in the chart are open on all sides, one story, with a permeable roof. A solid roof attached to the house is a different review, so we confirm with the city how yours will be treated before we draw it.
Frisco also requires accessory structures to use the same exterior materials as the house. Fiber cement siding can stand in for masonry on a structure of 200 square feet or less, and metal or wood is allowed only at 120 square feet or less.
Matching a Frisco roof
Most Frisco houses have architectural or designer shingles, with tile, slate-look and standing seam accents on the larger custom homes. On a shingle house, a cover with enough pitch gets matching shingles, and we can step up to impact-rated shingles. Where the cover has to be low to fit under second-story windows, standing seam in a color pulled from the main roof is the clean answer, and we form it on our own roll formers in 24 or 26 gauge. On tile, we match the tile where the framing can carry it. Brick or stone columns to match the house, a stained ceiling and a gutter line tied into the house's downspouts finish it.
The roof is what has to last
An outdoor kitchen cover is a real roof that happens to have no walls. It gets the same hail and wind as your house, plus heat from the grill underneath. What we put on it:
- Standing seam metal, which we form on our own roll formers in 24 or 26 gauge. It handles the low pitch most covers have, sheds oak leaves, and looks right next to brick and stone. Metal lead time is typically 1 to 2 weeks. See standing seam.
- Shingles matched to the house, including impact-rated shingles, where the cover has enough pitch.
- Tile, slate or Enviroshake tie-ins on homes with those roofs. We match the main roof when the pitch and framing allow, or pair it with standing seam in a color pulled from the house. See outdoor kitchen roofs that tie into tile or slate.
- Gutters and downspouts sized so a summer downpour doesn't sheet onto the counters or wash out a flower bed. See gutters.
Where the new roof meets the house, we flash it into the wall or under the existing roofing. That joint should never depend on caulk.
Smoke, heat, gas and power
A covered grill needs somewhere for the smoke and heat to go. We plan the ceiling height, the vent hood and the clearances to the grill maker's instructions before framing starts, and we keep combustible trim away from the heat. Gas lines, electrical circuits for lights, fans and outlets, and any sink plumbing are done by the right trade under their own permits, and we schedule that rough-in so nothing has to be torn back open later. Natural gas or propane, a built-in refrigerator, an ice maker or a pizza oven all change what goes into the plan, so we ask about appliances first.
Hail around Frisco
NOAA's Storm Events Database lists 69 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Frisco from 2016 through the September 2026 update, the highest count of the towns on this page. The largest was 4.5-inch hail near Allen on March 24, 2019. On June 11, 2023, 3.5-inch hail fell near Carney, about two miles from Frisco, and this year the list includes 2-inch hail near Carney on June 2, 2026, about three and a half miles away.
A cover or pool house in Frisco gets the same hail as the main roof. We use the same underlayment, flashing and edge metal, and impact-rated shingles or standing seam where they match the house.
How an outdoor kitchen job runs with us
- Site visit. We look at the back of the house, the roofline, the yard and the pool, and talk about how you cook and entertain.
- Design. We can bring in an architect to spec a new build, or build to plans you already have.
- Written scope. Structure, roof material and color, gutters, appliances, finishes and every flashing detail, with no surprises later.
- Approvals. Your HOA's approval if you have one, then the permit with the City of Frisco. We prepare the drawings and the site plan.
- Build. Our own crews build it from start to finish. The trades for gas, power and plumbing are scheduled around the framing.
- Inspections and walk-through. We call for the inspections, walk the finished kitchen with you, and give you the workmanship warranty in writing.
More for Frisco homeowners
Planning the whole backyard? See pool houses in Frisco and our pergolas and patio covers. For the house itself: metal roofing in Frisco, standing seam and tile roofing.
We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers.
Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.






