Outdoor kitchens in Shady Shores
Shady Shores is a small town on I-35E near the shoreline of Lewisville Lake, about seven miles southeast of Denton. It incorporated in October 1960, and the Handbook of Texas records it growing from 543 residents in 1970 to 1,461 in 2000; Census estimates show about 3,000 people today.
Shady Shores is different from the rest of the Lake Cities. Many homes sit on an acre or more, with mature trees, detached shops, barns and even hangars, and the town still issues permits for water wells and septic systems. That leaves room for a real outdoor living area: a pavilion out by the pool, a kitchen with a view of the trees, or a pool house that needs to match the main house and the shop behind it.
Who builds outdoor kitchens in Shady Shores?
Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:
- 75 years as a family roofing and exterior business, and 30 years in the trade for owner Blake Snow.
- 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
- Snow Roofing & Exteriors is BBB A+ rated, fully insured, with references available on request.
- Our own crews, who frame, roof, side, trim and finish outdoor kitchens and covers from start to finish.
- One company for the whole outside of the house: roofs, gutters, siding, windows, soffit and fascia, paint, and outdoor living.
- A workmanship warranty from 10 years up to lifetime, depending on the job, in writing.
Four ways to put a roof over an outdoor kitchen
Most Shady Shores outdoor kitchens end up as one of these. Which one fits depends on the back of the house, where the sun sets, how close the pool or the fence line is, and what the city allows on your lot.
| Layout | Good for | What to watch |
|---|---|---|
| Attached cover, tied into the house roof | Short walk from the kitchen door, one continuous roofline | The tie-in is the most common leak spot on any patio roof, and attaching can change how the city treats the structure |
| Freestanding pavilion | Putting the grill where the view, the pool or the shade is best | Footings, wind bracing and setbacks from the property lines |
| Cover over an existing island | Owners who already have counters and a grill out in the sun | Whether the island can stay where it is, and how smoke will clear |
| Kitchen built into a pool house | Big backyards, entertaining, a bath and storage under one roof | Plumbing to the sewer, pool setbacks and, for enclosed buildings, wall material rules |
We plan the cover and the kitchen together, so the posts land where the counters need them, the vent hood has a clear path, and the roof drains away from the cooking area and the pool deck.
Town of Shady Shores permits for outdoor kitchens and patio covers
Shady Shores has its own patio cover and outdoor kitchen permit page, and it's one of the most detailed in the area. New patio covers, shade structures, arbors, gazebos and cabanas need a permit, and an outdoor kitchen needs a building permit for its construction, plus any electrical or plumbing permits. What the town asks for:
- A site plan or survey with the structure marked and its distance to all property lines and other structures.
- Full drawings: floor plan, framing plan with lumber size, species, grade and spacing, foundation plan and footing detail, elevations from all sides with the height, an electrical plan, and a drainage plot plan with arrows showing how water leaves the site.
- Attachment details if the cover attaches to the house: bracket types, bolt size and length, and what it attaches to.
- Engineering: aluminum, steel or vinyl structures must be engineered, and cedar structures need a signed and sealed engineer's design.
- For the kitchen: a list of appliances, whether the grill runs on natural gas or propane, and the town requires outdoor sinks and ice chests to drain to the sanitary sewer.
- HOA approval, where your subdivision has one, must be attached to the application.
Inspections are foundation, framing and final, plus electrical, plumbing and gas as needed, all requested through the town's online portal. The town's fee schedule lists an outdoor patio or living structure at $245 without utilities and $450 with utilities, plus a $100 patio cover plan review, and unpermitted work pays double. Those are the town's fees, not our price.
What the town's package means for your design
Shady Shores asks for drawings that many homeowners don't expect for a patio cover. That's good news if your contractor is ready for it. A few choices change the paperwork:
- Cedar or steel means an engineer. The town requires a signed and sealed engineer's design for cedar structures and engineering for aluminum, steel or vinyl. We line that up as part of the design, so it doesn't stall the permit.
- Attached means attachment details. If the cover ties into the house, the town wants the brackets, bolts and what they fasten to. On a brick house we detail a ledger and flashing that won't trap water behind the brick.
- A sink means a sewer line. Outdoor sinks and ice chests have to drain to the sanitary sewer, which changes where the kitchen can go, especially on lots with a septic system. We plan the drain route early.
- Utilities change the fee. An outdoor living structure with utilities is a higher town fee than one without, and the electrical, plumbing and gas permits are separate.
- Drainage is drawn, not assumed. The town wants a drainage plot plan with arrows. On a wooded acre that slopes toward the lake, that plan shapes the slab, the gutters and where the downspouts go.
Placement is also on the site plan, with distances to every property line and other structure. If the kitchen is going next to a pool, the town's pool rules keep the pool at least 5 feet from buildings with foundations, and farther for deeper sections, so we plan the two together.
The roof is what has to last
An outdoor kitchen cover is a real roof that happens to have no walls. It gets the same hail and wind as your house, plus heat from the grill underneath. What we put on it:
- Standing seam metal, which we form on our own roll formers in 24 or 26 gauge. It handles the low pitch most covers have, sheds oak leaves, and looks right next to brick and stone. Metal lead time is typically 1 to 2 weeks. See standing seam.
- Shingles matched to the house, including impact-rated shingles, where the cover has enough pitch.
- Tile, slate or Enviroshake tie-ins on homes with those roofs. We match the main roof when the pitch and framing allow, or pair it with standing seam in a color pulled from the house. See outdoor kitchen roofs that tie into tile or slate.
- Gutters and downspouts sized so a summer downpour doesn't sheet onto the counters or wash out a flower bed. See gutters.
Where the new roof meets the house, we flash it into the wall or under the existing roofing. That joint should never depend on caulk.
Smoke, heat, gas and power
A covered grill needs somewhere for the smoke and heat to go. We plan the ceiling height, the vent hood and the clearances to the grill maker's instructions before framing starts, and we keep combustible trim away from the heat. Gas lines, electrical circuits for lights, fans and outlets, and any sink plumbing are done by the right trade under their own permits, and we schedule that rough-in so nothing has to be torn back open later. Natural gas or propane, a built-in refrigerator, an ice maker or a pizza oven all change what goes into the plan, so we ask about appliances first.
Hail and wind in Shady Shores
NOAA's Storm Events Database lists 52 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Shady Shores from 2016 through the September 2026 update. The closest big one was March 26, 2017, when 4.25-inch hail fell near Corinth less than two miles from the center of town, with 2.75-inch and 2.5-inch hail about two miles away the same night. On April 11, 2016, 2.75-inch hail fell about a mile and a half from town, and 1-inch hail fell under a mile from the center of town on June 8, 2025.
Wind is the other half. NOAA lists a 77 mph gust on July 10, 2019 at the North Central Texas College campus in Corinth, a little over a mile away, and a 67 mph gust in Lake Dallas on March 2, 2023. On a big, open lot, an open-sided cover takes that wind with nothing to slow it down, so the anchors, beams and roof connections get as much attention as the roofing.
How an outdoor kitchen job runs with us
- Site visit. We look at the back of the house, the roofline, the yard and the pool, and talk about how you cook and entertain.
- Design. We can bring in an architect to spec a new build, or build to plans you already have.
- Written scope. Structure, roof material and color, gutters, appliances, finishes and every flashing detail, with no surprises later.
- Approvals. Your HOA's approval if you have one, then the permit with the Town of Shady Shores. We prepare the drawings and the site plan.
- Build. Our own crews build it from start to finish. The trades for gas, power and plumbing are scheduled around the framing.
- Inspections and walk-through. We call for the inspections, walk the finished kitchen with you, and give you the workmanship warranty in writing.
More for Shady Shores homeowners
More for the backyard: pool houses in Shady Shores, pergolas and patio covers, and the Lewisville Lake pool house and outdoor kitchen guide. For the house and outbuildings: standing seam in Shady Shores, siding, exterior painting and storm damage.
We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers.
Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.
