Siding on Keller homes
Keller is on U.S. 377 about 15 miles north of Fort Worth, in northeast Tarrant County. Its roots go back to Double Springs, settled in the early 1850s, and Census estimates show about 46,000 residents today. Most of the city is single-family neighborhoods, from SF-8.4 subdivision lots (8,400 square feet and up) to SF-36 estate lots of 36,000 square feet or more on the edges of town, many under HOA architectural rules.
On a typical Keller house the brick or stone stops at the first-floor plate line or the garage, and siding takes over on the gables, dormers, the chimney chase and the second story. Those are the walls that take the most sun and the hardest hail. On houses from the 1980s and 1990s in particular, we find swollen hardboard or wood-composite lap, soft trim at the bottom of gables, and caulk lines that gave up years ago.
Who replaces siding in Keller?
Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:
- 75 years as a family roofing and exterior business, and 30 years in the trade for owner Blake Snow.
- 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
- Snow Roofing & Exteriors is BBB A+ rated, fully insured, with references available on request.
- Our own crews, who tear off, repair, wrap, side, trim and paint.
- One company for the whole outside of the house: roofs, gutters, siding, windows, soffit and fascia, paint, and outdoor living.
- A workmanship warranty from 10 years up to lifetime, depending on the job, in writing.
City of Keller siding permits
Keller's Building Services FAQ says a permit is required to construct, enlarge, alter, repair, move or demolish a building or structure. Its list of exempt work includes painting and similar finish work, small one-story sheds and roof repairs that don't involve decking, but not siding, and the city asks owners to contact Building Services (817-743-4110) to confirm whether a specific project needs a permit. That's what we do: before we order, we confirm the permit for your scope with Building Services and file it. A few Keller details:
- Permits go in through the city's online Enterprise Permitting & Licensing system, and fees come from the city's building services fee schedule. They're city fees, not our price.
- The FAQ lists Keller's design criteria: a 90 mph fastest-mile wind speed, exposure category B. Siding, trim and house wrap are fastened to the manufacturer's instructions for those loads, which is one reason nail type and spacing matter as much as the product.
- Building Services is open Monday through Thursday and closed Fridays, so we plan inspections around that.
HOA approval in Keller
Many Keller subdivisions have HOAs with architectural rules. Committees typically look at siding profile, color and trim. We prepare the submission with product data, color samples and photos, and wait for written approval before we order.
Siding materials, in plain English
We install any kind of siding, in all major brands. Most homeowners don't know the product names, and they don't need to. What matters is how each material behaves on a North Texas wall:
| Material | What it is | Good to know |
|---|---|---|
| Vinyl | Plastic lap or panel siding with the color all the way through | Lowest upkeep and budget-friendly. Thicker panels resist cracking better; thin vinyl can crack in a hard hailstorm, especially on a cold morning. |
| Fiber cement | A rigid board made from cement and fibers, usually painted | Won't rot or burn, holds paint well, and looks like painted wood. Heavier, so it takes more care to install and cut. |
| Engineered wood | Wood fibers pressed with resins into lap boards and panels | A real wood look and lighter than fiber cement. The ends and cuts have to be sealed and painted right. |
| Metal | Steel or aluminum lap or vertical panels | Very durable, and it can match a metal roof. Large hail can dent it. |
| Stucco and stone veneer | Cement plaster or thin stone over a lath system | Common as accents on gables and entries. Repairs are about blending texture and color, not just patching. |
We'll show you samples on your own wall and give you the tradeoffs in writing, including cost, maintenance and how each one holds up to hail and heat.
Where brick meets siding
On most Keller houses the leak points are the same: the line where siding meets the top of the brick, the bottom of a gable that sits on a lower roof, and the chimney chase. Water runs down the siding, reaches a horizontal joint and gets behind it if the flashing is missing or reversed. We flash those transitions so water sheds out, keep siding the right distance off the roof and flatwork, and replace soft sheathing where we find it. Where the HOA allows, fiber cement or engineered wood in a board-and-batten or shake profile on the gables is a common upgrade over original lap.
What happens under the new siding
Siding is the part you see. The part that keeps the wall dry is underneath, and that's where cheap siding jobs cut corners:
- Tear-off and look. Once the old siding is off we check the sheathing for soft spots, rot and old leaks, especially below windows and at the bottom of walls, and show you photos before anything is covered up.
- Repair the wall. Damaged sheathing is replaced, and rotted trim and fascia are fixed instead of wrapped. See soffit and fascia.
- House wrap and flashing. The weather barrier is lapped the right way, and windows and doors are flashed into it so water runs out, not in. See replacement windows.
- Siding and trim. Installed to the manufacturer's instructions, with the right clearances at the roof line, grade and flatwork.
- Paint and clean-up. Painted siding gets exterior paint once the walls and trim are done, then a final walkthrough.
Siding and a new roof, on one schedule
The roof edge, drip edge, soffit, fascia, gutters and the top course of siding all meet at the same line. When one company does them together, colors are picked in one meeting, the flashing is tied in once, and nobody has to come back and pull off the other crew's work. Our own crews build everything, so you have one schedule and one person to call.
Hail around Keller
NOAA's Storm Events Database lists 45 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Keller from 2016 through the September 2026 update. The worst day close to town was April 28, 2021, with 3.25-inch hail in Keller, about two and a half miles from the center of town, and 3-inch hail at two more spots in and near Keller the same day. The most recent big day was May 27, 2024: 2-inch hail at the Keller-area airport, with 2.75-inch hail in Bedford and Hurst. The Storm Prediction Center's 2026 reports include 1-inch hail 3 miles northwest of Keller and 1.5-inch hail 2 miles southeast of Haslet on August 26, 2026 and 1-inch hail just east-northeast of Keller on September 21, 2026.
Hail-damaged siding in Keller
Hail cracks fiber cement, splits vinyl, dents metal and knocks paint off wood, often only on the side the storm came from. We document siding damage together with the roof, gutters and windows, and we'll tell you honestly whether a repair can be blended or the elevation needs replacing. Read replace or repair hail-damaged siding. If you file an insurance claim, we document the damage with photos and meet your adjuster. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file a claim; check your policy.
Photos
The photos below show siding replacement work by our crews, before, during and after. We never show a street or address.
More for Keller homeowners
More in Keller: exterior painting in Keller, window replacement in Keller, metal roofing in Keller, standing seam, outdoor kitchens, pool houses and our Keller roofing page. Nearby: siding in Southlake.
We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers.
Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.






