Siding on Westlake homes
Westlake is a small town of about 2,057 residents (2025 Census estimate) in far northeast Tarrant County, made up mostly of custom homes in gated and planned communities such as Vaquero, Glenwyck Farms, Terra Bella, Granada and Entrada. The houses are architect-designed and mostly stone, stucco and brick, so exterior work here is rarely a whole-house re-side. It's matching: a gable, a dormer, a second-story bay or a guest house in fiber cement, board-and-batten or stucco that has to sit beside the original stone as if it had always been there, approved by an architectural committee before anything is ordered.
The problems we see on Westlake houses are about exposure and detail, not cheap siding. Two-story west walls bake every afternoon. Board-and-batten and lap gables crack or open up at the butt joints. Painted trim around arched windows rots where the caulk failed. Stucco develops hairline cracks around openings and at the joint where it meets stone. And hail can mark an entire rear elevation in one storm.
Who replaces siding in Westlake?
Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:
- 75 years as a family roofing and exterior business, and 30 years in the trade for owner Blake Snow.
- 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
- Snow Roofing & Exteriors is BBB A+ rated, fully insured, with references available on request.
- Our own crews, who tear off, repair, wrap, side, trim and paint, so one company answers for the whole wall.
- One company for the whole outside of the house: roofs, gutters, siding, windows, soffit and fascia, paint, and outdoor living.
- A workmanship warranty from 10 years up to lifetime, depending on the job, in writing.
Town of Westlake permits for siding work
Westlake's 2026 residential project guidelines are blunt: no work starts until a building permit has been issued, and work without one can bring fines or an injunction. Permits are filed online through the Town's MyGov system with a plan review fee, and the general contractor has to be registered with the Town (the guidelines list $125, valid for one year). Where a community has an architectural review body, the Town wants its HOA or ACC approval letter before it will accept the application, and its residential remodel checklist lists that approval right beside the application and the plan review fee.
On September 15, 2026, the Town adopted the 2024 International Residential Code with NCTCOG-recommended amendments (Ordinance 977). Westlake doesn't publish a separate line saying exactly which siding scopes need their own permit, so before we order anything we confirm with the Town's building staff how your project is filed, usually as a remodel, and what drawings they want for it. On a custom house that's rarely a surprise: the committee submission and the Town submission use the same elevations and product sheets.
Architectural committee approval
In Westlake's gated communities the committee is usually a bigger hurdle than the Town. Committees look at profile, exposure, texture, color and how a new material meets the stone. We prepare the submission with product data sheets, color samples, photos of every elevation and a marked-up drawing of what changes, and we wait for written approval before we order anything. If a committee asks for a revision, we turn it around quickly so the Town submission isn't held up.
Siding materials, in plain English
We install any kind of siding, in all major brands. Most homeowners don't know the product names, and they don't need to. What matters is how each material behaves on a North Texas wall:
| Material | What it is | Good to know |
|---|---|---|
| Vinyl | Plastic lap or panel siding with the color all the way through | Lowest upkeep and budget-friendly. Thicker panels resist cracking better; thin vinyl can crack in a hard hailstorm, especially on a cold morning. |
| Fiber cement | A rigid board made from cement and fibers, usually painted | Won't rot or burn, holds paint well, and looks like painted wood. Heavier, so it takes more care to install and cut. |
| Engineered wood | Wood fibers pressed with resins into lap boards and panels | A real wood look and lighter than fiber cement. The ends and cuts have to be sealed and painted right. |
| Metal | Steel or aluminum lap or vertical panels | Very durable, and it can match a metal roof. Large hail can dent it. |
| Stucco and stone veneer | Cement plaster or thin stone over a lath system | Common as accents on gables and entries. Repairs are about blending texture and color, not just patching. |
We'll show you samples on your own wall and give you the tradeoffs in writing, including cost, maintenance and how each one holds up to hail and heat.
Stucco, stone and siding together
Many Westlake houses mix three or four exterior materials on one elevation. The joints between them are where water gets in. Where siding meets stone, we keep the right clearance and flash the transition so water sheds out over the stone, not behind it. Where stucco is cracked, we find out whether it's surface cracking or a failed weather barrier underneath before we quote a patch, because patching over a wet wall only hides the problem. When stucco repairs are needed, the goal is a blend in texture and color that a committee won't notice.
On gables and upper walls, fiber cement in a board-and-batten or smooth lap profile is a common choice. It won't rot, it holds paint well, and it can be detailed to look like the original painted wood on a custom house. Engineered wood is lighter and has a real wood look, but its cut ends have to be sealed and painted right. We'll put both side by side on your wall.
What happens under the new siding
Siding is the part you see. The part that keeps the wall dry is underneath, and that's where cheap siding jobs cut corners:
- Tear-off and look. Once the old siding is off we check the sheathing for soft spots, rot and old leaks, especially below windows and at the bottom of walls, and show you photos before anything is covered up.
- Repair the wall. Damaged sheathing is replaced, and rotted trim and fascia are fixed instead of wrapped. See soffit and fascia.
- House wrap and flashing. The weather barrier is lapped the right way, and windows and doors are flashed into it so water runs out, not in. See replacement windows.
- Siding and trim. Installed to the manufacturer's instructions, with the right clearances at the roof line, grade and flatwork.
- Paint and clean-up. Painted siding gets exterior paint once the walls and trim are done, then a final walkthrough.
Siding and a new roof, on one schedule
The roof edge, drip edge, soffit, fascia, gutters and the top course of siding all meet at the same line. When one company does them together, colors are picked in one meeting, the flashing is tied in once, and nobody has to come back and pull off the other crew's work. Our own crews build everything, so you have one schedule and one person to call.
Hail around Westlake
NOAA's Storm Events Database lists 53 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Westlake from 2016 through the September 2026 update, one of the higher counts of any town we serve. The June 11, 2023 storm brought 4.25-inch hail near Bartonville and 4-inch hail near Grapevine Reservoir, both under six miles away, and on May 27, 2024, 2-inch hail was reported at the Roanoke-area airport, about three miles from Westlake. The Storm Prediction Center's 2026 reports include 1-inch hail 3 miles northwest of Keller and 1.5-inch hail 2 miles southeast of Haslet on August 26, 2026 and 1-inch hail just east-northeast of Keller on September 21, 2026.
Hail-damaged siding in Westlake
Hail cracks fiber cement, dents metal, chips stucco and knocks paint off wood trim, often only on the side the storm came from. We document siding damage together with the roof, gutters and windows, and we'll tell you honestly whether a repair can be blended or the elevation needs replacing. Read siding replacement after hail in Westlake and Southlake. If you file an insurance claim, we document the damage with photos and meet your adjuster. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file a claim; check your policy.
Photos
The photos below show siding replacement work by our crews, before, during and after. We never show a street or address.
More for Westlake homeowners
More in Westlake: exterior painting in Westlake, window replacement in Westlake, tile roofing, slate roofing, Enviroshake, outdoor kitchens and our Westlake roofing page. Nearby: siding in Southlake.
We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers.
Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.






