Offices in Bridgeport · Decatur · Rhome · Class 3+ impact-rated shingles on every roof Call (817) 733-9228
Snow Roofing & Exteriors logo

Free Roof Replacement Estimate

📞 Call (817) 733-9228
Greenwood, TX · Barn roofing

Barn Roofing in Greenwood, TX

Snow Roofing & Exteriors roofs, repairs and builds dairy barns, hay barns, horse barns, pole barns and shops around Greenwood and northeast Wise County. We form standing seam and R-panel on our own roll formers in 24 or 26 gauge, offer corrugated and PBR panels too, and our own crew does the work. Greenwood is about 14 miles from Decatur, where we have an office. Call (817) 733-9228.

Ranch and dairy country around Greenwood

Greenwood is on Farm Road 1204 in northeast Wise County, about 14 miles northeast of Decatur. TSHA says two cowboys named Hart and Greenwood camped there in the 1870s and gave their names to Hart's Creek and the town, that Wag Wilson's stone Rock Ranch house served settlers as a fort, and that the post office opened in 1877. The Greenwood Male and Female Normal College opened in 1892 and burned in 1908, and the WPA built the stone school in the Depression. By the 1970s the local economy leaned on dairy and beef.

That history is still in the barns: old dairy barns and hay barns, horse barns, pole barns and equipment sheds on pasture, with newer shops and barndominiums on smaller tracts. Greenwood is unincorporated, so there's no Census count for the town. It's about 14 miles from Decatur, where we have an office, and about 29 road miles (roughly 42 minutes) from our Bridgeport office. See also pole barn and hay barn metal roofs in Wise County.

Which metal goes on which building

A barn roof isn't one product. What goes on a hay barn in Greenwood isn't always what belongs on a horse barn or a shop you can see from the back porch. Here's how we match the panel to the building:

BuildingWhat we usually recommendWhy
Hay barn, equipment barn, loafing shedR-panel or PBR, 24 or 26 gaugeStrong ribs that span open purlins, quick to install, easy to repair a panel at a time
Pole barn or post-frame buildingR-panel or PBR, with closures and trim made for the panelThe screw pattern at the eaves, rakes and ridge is what holds it down in a storm
Horse barn, stable or covered arenaR-panel, PBR or standing seam, with ventilation and condensation plannedAnimals add moisture to the air, and bare steel sweats over it
Show barn, or a barn in full view of the houseStanding seamHidden fasteners, clean lines and no exposed screws to re-tighten later
Barndominium or barn with living spaceStanding seam or R-panel over a planned insulation and vapor layerSee barndominium, shop and ag roofs
Sheds, carports, boat and RV coversCorrugated, R-panel or PBRMatches older buildings and keeps small jobs simple

We form standing seam and R-panel on our own roll formers in 24 or 26 gauge, and we also offer corrugated and PBR panels. Metal lead time is typically 1 to 2 weeks. We don't post prices, because building size, framing condition, tear-off and trim change the number a lot. You get a written price for your building.

Re-screw, re-panel or re-roof?

Most old barn roofs don't have to come off. We walk the roof where it's safe, fly a drone where it isn't, look at the purlins from inside, and show you the photos behind our call:

  • Re-screw: the panels are sound, but rubber washers have cracked in the sun or screws have backed out. New fasteners, one size up where the holes have worn oval, can add years to a roof that's otherwise fine.
  • Partial re-panel: some panels are rusted through, punctured by hail or bent by wind, usually along the eaves, the rakes or an old lean-to. We replace those panels and fix the trim and closures around them.
  • Full re-roof: rust is widespread, the old panels are too thin to hold a screw, or the barn is being enclosed or finished for living space and needs an insulation and vapor plan. See metal roof repair and restoration.

Whichever it is, we check the framing first. A new roof on rotted or undersized purlins is money spent twice.

Wind and hail around Greenwood

NOAA's Storm Events Database lists 3 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Greenwood from 2016 through the September 2026 update: 1.75-inch hail at Greenwood on April 11, 2016, reported by a trained spotter about a mile and a half from town, and 1.75-inch hail near Slidell, about four miles east, on March 17, 2016 and October 20, 2019. Wise County as a whole logged 40 such reports, up to 4.5 inches.

For barns around Greenwood, wind is the bigger risk:

  • March 21, 2022: near Slidell, about five miles away, several homes took roof damage and sheds were damaged. The same storm damaged a large wood and sheet-metal building on a property along Waide Road near Bolivar, about seven miles east, and an EF-1 tornado near Leo in Cooke County, about nine miles northeast, knocked down half a concrete silo.
  • May 23, 2017: on County Road 2723 just west of FM 455, about five miles away, wind destroyed a carport and took the roof off a mobile home.
  • May 25, 2024: the long-track tornado that crossed southeast Montague County passed about seven and a half miles north of Greenwood on its way into Cooke County, where it reached EF-3.
  • March 18, 2020, EF-0 tornado: along County Road 2690, about nine miles west, it damaged a shed with winds up to 100 mph.

What wind does to a barn roof

A house is closed on all sides. Most barns aren't. Wind blowing into an open bay or a big door pushes up on the underside of the roof while it pulls on the top, so a barn roof takes load from both sides at once. That's why the failures we see follow a pattern:

  • The edges go first. Eaves, rakes and the ridge carry the most uplift. If a panel is going to peel, it usually starts there, then the wind gets under the next one.
  • Screws loosen before they let go. Years of heat and cold work exposed fasteners loose. A loose screw leaks first, then the panel starts to lift.
  • Trim and closures matter. Missing foam closures and loose rake trim let wind and wasps in and give a gust something to grab.
  • Old lean-tos are weak links. Additions framed lighter than the main barn, or lapped onto it badly, are where many barn roofs start to fail.

When we roof or repair a barn, the fastener spacing at the edges, the trim attachment and the condition of the purlins get the most attention, because that's what keeps the roof on the building.

Permits for a barn near Greenwood

Greenwood is unincorporated Wise County. Most barns with a Wise County address are outside any city limits. Wise County's own FAQ says the county does not require general building permits; inside a city or its extraterritorial jurisdiction, City Hall is the place to ask, and septic permits are required either way through Wise County Public Works at 940-627-9332. No county permit doesn't mean no rules: a barn roof still goes on to the panel maker's instructions, and a new barn still has to be built for the wind it will see.

Old dairy barns: keep, re-roof or repurpose

Many old dairy barns around Greenwood now hold hay, equipment or a shop. A barn built for a dairy often has long, low roofs, lean-tos added over the years, and panels from three or four different decades. Before we price one, we check the purlins and the framing for rot and rust, because new panels on tired framing don't last. If the frame is good, we can re-roof it in 24- or 26-gauge R-panel or PBR and tie the lean-tos in under one consistent roof. If it's becoming a shop or living space, we plan insulation and a vapor layer so the new roof doesn't sweat. See condensation control under a metal roof.

New barns, built by our own crews

We don't only roof barns, we build them. For a new barn, pole barn, horse barn, shop or ag building, we can bring in an architect to spec the project, or build to the specs and plans you already have. Our own crews do the work from start to finish, and the roof can go on in a color that matches the house and the other buildings so the property looks like one place.

Details that decide whether a barn roof lasts

  • Condensation control if the barn is enclosed, stores hay, houses animals or has any conditioned space. A vapor barrier or insulation under the panels and ventilation that suits the use keep it from "raining" inside. See condensation control under metal.
  • Ridge and eave closures that fit the panel profile, so wind-driven rain, birds and wasps stay out.
  • Flashing where buildings meet: lean-tos, porches, a shop wall or a stall row added later.
  • Gutters and drainage where water would otherwise sheet onto a pad, an arena entry or a doorway. See gutters.
  • Skylight panels replaced with the roof, because old clear panels turn brittle and crack long before the steel wears out.
  • Color match across the house, barn and shop.

How a barn roof job runs with us

  1. Inspection and free digital photo report: panels, fasteners, trim, purlins and framing, with measurements. You see what we see.
  2. Written options: re-screw, re-panel or re-roof, with the panel, gauge, color, trim and fastener plan spelled out.
  3. Paperwork: we check whether your barn is inside city limits or on county land, then file what applies.
  4. Panels formed for your building on our own roll formers, cut to the length of each roof plane so long runs don't need mid-slope laps.
  5. Install by our own crew, with the edges, ridge and penetrations detailed for wind.
  6. Clean-up and walk-through: a magnet sweep for screws and scrap, so nothing ends up in a hoof or a tire, and your warranty in writing.

Storm damage and insurance on barns

Hail dents and punctures panels and cracks old washers, and wind lifts edges and tears trim. Whether a barn is covered, and for how much, depends on your policy: some cover farm and ranch buildings fully, some cover them for less, and some treat cosmetic dents differently from leaks. Our photo report separates storm damage from age and rust, which is what an adjuster needs to see. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.

Who roofs and builds barns in Greenwood?

Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:

  • 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
  • Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
  • 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
  • Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
  • Our own crew, working out of our Decatur office, about 14 miles from Greenwood.
  • Snow Roofing & Exteriors is BBB A+ rated.

Photos

The barn image at the top is an illustration. The photos below are real metal roofs our crews installed on houses, shown so you can see our panel, trim and seam work up close. We don't have barn job photos from Greenwood on file, so we don't show any. We never show a street or address.

We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. More nearby: barn roofing in Decatur, barn roofing in Alvord, barn roofing in Krum, metal roofing in Wise County and our Greenwood roofing page.

Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.

Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.

Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.

Request a free inspection or call (817) 733-9228. Small repairs are welcome too.

Frequently asked questions

Who roofs barns in Greenwood, TX?

Snow Roofing & Exteriors roofs, repairs and builds dairy barns, hay barns, horse barns, pole barns and shops around Greenwood. It is a family roofing business that goes back 75 years, owner Blake Snow has 30 years in the business, the company has completed over $80 million in roofing projects, and it has 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. Standing seam and R-panel are formed on its own roll formers in 24 or 26 gauge. Greenwood is about 14 miles from Decatur, where it has an office. Call (817) 733-9228.

Do I need a permit for a barn in Greenwood?

Greenwood is unincorporated Wise County, and the county says it does not require general building permits. Septic permits are required countywide through Wise County Public Works. We confirm the property is outside any city limits or ETJ before we start.

Does Wise County require a permit for a new barn?

Wise County says it does not require general building permits. Inside a city or its extraterritorial jurisdiction, check with City Hall. Septic permits are required countywide through Wise County Public Works. We check which side of the line your property is on before we start.

Has wind damaged barns and sheds near Greenwood?

Yes. NOAA notes shed damage near Slidell and a large wood and sheet-metal building damaged near Bolivar on March 21, 2022, a carport destroyed on County Road 2723 on May 23, 2017, and an EF-1 tornado near Leo in Cooke County that knocked down half a concrete silo in 2022.

How big has hail been around Greenwood?

NOAA lists 1.75-inch hail at Greenwood on April 11, 2016 and near Slidell in March 2016 and October 2019, for 3 reports of golf-ball-size hail within about 10 miles since 2016. Wise County as a whole logged 40, up to 4.5 inches.

Can you re-roof an old dairy barn?

Yes, if the framing is sound. We check purlins and framing first, then re-roof in 24- or 26-gauge R-panel or PBR and bring add-on lean-tos under one consistent roof.

R-panel or PBR for my barn?

Both are exposed-fastener ribbed panels and both work on barns. PBR adds a purlin-bearing leg at the side lap for more bearing where panels overlap. We pick based on your framing, span and how the building is used.

Can you fix my old barn roof instead of replacing it?

Often, yes. If the panels are sound and only the screws and washers have failed, a re-screw can buy years. If some panels are rusted or damaged, we replace those. We recommend a full re-roof only when rust is widespread, the panels are too thin to hold a screw, or the barn is being enclosed.

Do you build new barns or only roof them?

Both. We can bring in an architect to spec a new barn, pole barn, horse barn or ag building, or build to your existing specs and plans. Our own crews do the building from start to finish.

What gauge metal do you put on a barn?

Our standing seam and R-panel roofs are 24 or 26 gauge, formed on our own roll formers. We also offer corrugated and PBR panels.

Why does my metal barn roof drip on the inside?

Usually that is condensation: warm, humid air meeting cold steel. It is fixed with a vapor barrier or insulation under the panels and ventilation that fits how the building is used.

How soon can you start a barn roof?

Metal lead time is typically 1 to 2 weeks because we form standing seam and R-panel on our own roll formers. Install time depends on the building size, tear-off and weather.

Will insurance pay for a hail-damaged barn roof?

It depends on your policy. Some policies cover farm and ranch buildings fully, some for less, and some treat cosmetic dents differently from leaks. We document the damage with photos and meet your adjuster. In Texas you generally have 1 year from the date of loss to file; check your policy.

What warranty comes with a barn roof?

Our workmanship warranty is from 10 years up to lifetime, depending on the job, plus the manufacturer’s warranty on the panel and finish, in writing.

Get a free roof inspection

We get on the roof, photograph what we find, and tell you plainly whether you need a repair or a replacement.

Free Roof Replacement Estimate

📞 Call (817) 733-9228

Certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake

Atlas Roofing certified contractor
📞 (817) 733-9228