Barns around a grain-market town
Krum is on Farm Road 1173 about seven miles northwest of Denton. The Gulf, Colorado and Santa Fe Railway platted the townsite on 200 acres in the mid-1880s and named it for railroad official Charles K. Krum, and by 1900 the railroad was shipping half a million bushels of wheat a year from there, enough for Krum to call itself the "largest inland grain market in the world." Census estimates show growth from 5,491 residents in 2020 to about 6,808 in 2025, with new subdivisions going in beside the farm and ranch land that still surrounds town.
That history is still standing in the fields. Drive out FM 1173 or FM 156 and you pass hay barns, equipment sheds, horse barns and shops on nearly every tract, many with roofs that went on decades ago. Some are galvanized corrugated that's finally rusting at the laps. Some are R-panel whose washers have baked in the sun until they crack. And as new houses go up on smaller acreage at the edge of town, a lot of new owners inherit a barn they didn't build and want to know whether to fix it or replace it. That's the work this page is about.
Which metal goes on which building
A barn roof isn't one product. What goes on a hay barn in Krum isn't always what belongs on a horse barn or a shop you can see from the back porch. Here's how we match the panel to the building:
| Building | What we usually recommend | Why |
|---|---|---|
| Hay barn, equipment barn, loafing shed | R-panel or PBR, 24 or 26 gauge | Strong ribs that span open purlins, quick to install, easy to repair a panel at a time |
| Pole barn or post-frame building | R-panel or PBR, with closures and trim made for the panel | The screw pattern at the eaves, rakes and ridge is what holds it down in a storm |
| Horse barn, stable or covered arena | R-panel, PBR or standing seam, with ventilation and condensation planned | Animals add moisture to the air, and bare steel sweats over it |
| Show barn, or a barn in full view of the house | Standing seam | Hidden fasteners, clean lines and no exposed screws to re-tighten later |
| Barndominium or barn with living space | Standing seam or R-panel over a planned insulation and vapor layer | See barndominium, shop and ag roofs |
| Sheds, carports, boat and RV covers | Corrugated, R-panel or PBR | Matches older buildings and keeps small jobs simple |
We form standing seam and R-panel on our own roll formers in 24 or 26 gauge, and we also offer corrugated and PBR panels. Metal lead time is typically 1 to 2 weeks. We don't post prices, because building size, framing condition, tear-off and trim change the number a lot. You get a written price for your building.
Re-screw, re-panel or re-roof?
Most old barn roofs don't have to come off. We walk the roof where it's safe, fly a drone where it isn't, look at the purlins from inside, and show you the photos behind our call:
- Re-screw: the panels are sound, but rubber washers have cracked in the sun or screws have backed out. New fasteners, one size up where the holes have worn oval, can add years to a roof that's otherwise fine.
- Partial re-panel: some panels are rusted through, punctured by hail or bent by wind, usually along the eaves, the rakes or an old lean-to. We replace those panels and fix the trim and closures around them.
- Full re-roof: rust is widespread, the old panels are too thin to hold a screw, or the barn is being enclosed or finished for living space and needs an insulation and vapor plan. See metal roof repair and restoration.
Whichever it is, we check the framing first. A new roof on rotted or undersized purlins is money spent twice.
Wind and hail around Krum
For a barn, wind is the everyday threat. NOAA's Storm Events Database records:
- September 19, 2023: damage to metal buildings and trees on Southwind Place near Krum, and a home in the Krum area that lost siding, shingles and fence.
- May 29, 2019, EF-0 tornado: it formed just south of the center of Krum and moved northeast through the east side of town, with peak winds estimated at 75 mph.
- March 4, 2025: about four miles from Krum, near Sanger, wind lifted a grain silo and blew it about 300 feet into a neighboring yard.
- March 27, 2018: NOAA lists wind damage to a barn off Swafford Road, about three miles southwest of Ponder.
- April 17, 2019: the Denton airport, about five miles east, measured a 74 mph gust, and metal roofs were torn off three buildings at UNT's Rafes Urban Astronomy Center next to it.
Hail is less frequent here than down by Lewisville Lake, but it's big when it comes. NOAA lists 25 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Krum from 2016 through the September 2026 update, including 2.5-inch hail in Krum on September 21, 2023, about a mile and a half from the center of town, and the 5.9-inch hail near Sanger on June 15, 2023, about seven miles north, the largest NOAA lists anywhere in Denton County in that period. Hail that size punctures thin old panels and cracks skylight panels outright.
What wind does to a barn roof
A house is closed on all sides. Most barns aren't. Wind blowing into an open bay or a big door pushes up on the underside of the roof while it pulls on the top, so a barn roof takes load from both sides at once. That's why the failures we see follow a pattern:
- The edges go first. Eaves, rakes and the ridge carry the most uplift. If a panel is going to peel, it usually starts there, then the wind gets under the next one.
- Screws loosen before they let go. Years of heat and cold work exposed fasteners loose. A loose screw leaks first, then the panel starts to lift.
- Trim and closures matter. Missing foam closures and loose rake trim let wind and wasps in and give a gust something to grab.
- Old lean-tos are weak links. Additions framed lighter than the main barn, or lapped onto it badly, are where many barn roofs start to fail.
When we roof or repair a barn, the fastener spacing at the edges, the trim attachment and the condition of the purlins get the most attention, because that's what keeps the roof on the building.
Krum permits, and barns outside the city limits
Inside city limits, the City of Krum's permits page says most construction work requires a permit and asks owners to check with Development Services at (940) 398-7302 before work starts. The city's online portal has its own roofing application, and Krum builds and inspects to the 2024 International Residential and Building Codes with regional and local amendments. Krum's zoning also expects larger accessory buildings in town to use materials and colors that go with the house, so for a new barn or shop inside the city we confirm the material and color rules with Development Services before anything is ordered.
Most barns with a Krum address sit on county land outside the city limits. There, the city's permits don't apply, but Denton County's do: its Development Services department requires a Development Permit for any development in unincorporated Denton County, including buildings and other structures, plus a culvert permit for a new drive off a county road. A new barn is development, so we check with the county before we build, and for a re-roof we confirm whether anything is needed. Either way, the roof goes on to the manufacturer's instructions.
Old galvanized barns, and when to keep the look
A lot of the barns around Krum are older galvanized corrugated or early R-panel, and some owners want to keep that look rather than switch to a painted color. We can do that: new corrugated or bare-metal-finish R-panel looks at home on an old barn, and we form R-panel in 24 or 26 gauge, heavier than the thin panel on many old buildings. If the barn sits near the house or a new shop, a painted panel in a matching color is the other common route. We'll show you both side by side before you decide.
New barns, built by our own crews
We don't only roof barns, we build them. For a new barn, pole barn, horse barn, shop or ag building, we can bring in an architect to spec the project, or build to the specs and plans you already have. Our own crews do the work from start to finish, and the roof can go on in a color that matches the house and the other buildings so the property looks like one place.
Details that decide whether a barn roof lasts
- Condensation control if the barn is enclosed, stores hay, houses animals or has any conditioned space. A vapor barrier or insulation under the panels and ventilation that suits the use keep it from "raining" inside. See condensation control under metal.
- Ridge and eave closures that fit the panel profile, so wind-driven rain, birds and wasps stay out.
- Flashing where buildings meet: lean-tos, porches, a shop wall or a stall row added later.
- Gutters and drainage where water would otherwise sheet onto a pad, an arena entry or a doorway. See gutters.
- Skylight panels replaced with the roof, because old clear panels turn brittle and crack long before the steel wears out.
- Color match across the house, barn and shop.
How a barn roof job runs with us
- Inspection and free digital photo report: panels, fasteners, trim, purlins and framing, with measurements. You see what we see.
- Written options: re-screw, re-panel or re-roof, with the panel, gauge, color, trim and fastener plan spelled out.
- Paperwork: we check whether your barn is inside city limits or on county land, then file what applies.
- Panels formed for your building on our own roll formers, cut to the length of each roof plane so long runs don't need mid-slope laps.
- Install by our own crew, with the edges, ridge and penetrations detailed for wind.
- Clean-up and walk-through: a magnet sweep for screws and scrap, so nothing ends up in a hoof or a tire, and your warranty in writing.
Storm damage and insurance on barns
Hail dents and punctures panels and cracks old washers, and wind lifts edges and tears trim. Whether a barn is covered, and for how much, depends on your policy: some cover farm and ranch buildings fully, some cover them for less, and some treat cosmetic dents differently from leaks. Our photo report separates storm damage from age and rust, which is what an adjuster needs to see. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.
Who roofs and builds barns in Krum?
Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:
- 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
- Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
- 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
- Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
- Our own crew, working about 21 road miles (roughly 34 minutes) from Krum out of our Rhome office.
- Snow Roofing & Exteriors is BBB A+ rated.
Photos
The barn image at the top is an illustration. The photos below are real metal roofs our crews installed on houses, shown so you can see our panel, trim and seam work up close. We don't have barn job photos from Krum on file, so we don't show any. We never show a street or address.
We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. More in Krum: metal roofing in Krum, standing seam in Krum, storm damage in Krum, siding in Krum, exterior painting in Krum, R-panel and standing seam on Krum houses and shops and our Krum roofing page. Nearby: barn roofing in Sanger, barn roofing in Denton and barn roofing in Decatur.
Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.
Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.
