Barns, shops and horse property around Rhome
Rhome grew from 1,633 residents in the 2020 Census base to an estimated 1,961 in 2025, and the towns around it grew much faster: Census estimates show Justin going from 4,399 to 7,285 and Northlake from 5,238 to 12,036 over the same years. That growth reaches the acreage around Rhome too: older hay barns and pole barns on Wise County land now sit next to new barndominiums, shops and horse barns, and many owners inherit a barn they didn't build.
Rhome is home turf for us. Our Rhome-area team is minutes away, so a leak, a lifted panel or a storm check doesn't wait long. If you're also thinking about the house, see metal roofing in Rhome and switching from shingles to standing seam.
Which metal goes on which building
A barn roof isn't one product. What goes on a hay barn in Rhome isn't always what belongs on a horse barn or a shop you can see from the back porch. Here's how we match the panel to the building:
| Building | What we usually recommend | Why |
|---|---|---|
| Hay barn, equipment barn, loafing shed | R-panel or PBR, 24 or 26 gauge | Strong ribs that span open purlins, quick to install, easy to repair a panel at a time |
| Pole barn or post-frame building | R-panel or PBR, with closures and trim made for the panel | The screw pattern at the eaves, rakes and ridge is what holds it down in a storm |
| Horse barn, stable or covered arena | R-panel, PBR or standing seam, with ventilation and condensation planned | Animals add moisture to the air, and bare steel sweats over it |
| Show barn, or a barn in full view of the house | Standing seam | Hidden fasteners, clean lines and no exposed screws to re-tighten later |
| Barndominium or barn with living space | Standing seam or R-panel over a planned insulation and vapor layer | See barndominium, shop and ag roofs |
| Sheds, carports, boat and RV covers | Corrugated, R-panel or PBR | Matches older buildings and keeps small jobs simple |
We form standing seam and R-panel on our own roll formers in 24 or 26 gauge, and we also offer corrugated and PBR panels. Metal lead time is typically 1 to 2 weeks. We don't post prices, because building size, framing condition, tear-off and trim change the number a lot. You get a written price for your building.
Re-screw, re-panel or re-roof?
Most old barn roofs don't have to come off. We walk the roof where it's safe, fly a drone where it isn't, look at the purlins from inside, and show you the photos behind our call:
- Re-screw: the panels are sound, but rubber washers have cracked in the sun or screws have backed out. New fasteners, one size up where the holes have worn oval, can add years to a roof that's otherwise fine.
- Partial re-panel: some panels are rusted through, punctured by hail or bent by wind, usually along the eaves, the rakes or an old lean-to. We replace those panels and fix the trim and closures around them.
- Full re-roof: rust is widespread, the old panels are too thin to hold a screw, or the barn is being enclosed or finished for living space and needs an insulation and vapor plan. See metal roof repair and restoration.
Whichever it is, we check the framing first. A new roof on rotted or undersized purlins is money spent twice.
Hail and wind around Rhome
NOAA's Storm Events Database lists 20 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Rhome from 2016 through the September 2026 update. The April 1, 2024 storm brought 2-inch hail at Rhome and Newark, 3.4-inch hail near Justin and 4.5-inch hail near Keeter, about nine miles west. A week later, on April 8, 2024, 3-inch hail fell at Boyd, about five miles away, and 1.75-inch hail was reported in Rhome on November 24, 2025.
Wind is just as hard on barns here:
- October 10, 2021: near Ford, about three miles away, multiple structures were damaged or destroyed, and NOAA notes most of the damage was peeled-off metal roofs.
- June 16, 2019 and August 29, 2020: in Briar, about six miles south, thunderstorm winds peeled part of the metal roof off a large metal garage, and a year later a downburst rolled RVs and empty 18-wheelers and destroyed sheds.
- January 10, 2020, EF-0 tornado: west-northwest of Boyd, about eight miles away, it destroyed a barn and scattered the debris about a quarter mile.
- September 5, 2025: about six miles east-southeast of Decatur, an outdoor metal building had walls collapse and parts of its roof destroyed.
What wind does to a barn roof
A house is closed on all sides. Most barns aren't. Wind blowing into an open bay or a big door pushes up on the underside of the roof while it pulls on the top, so a barn roof takes load from both sides at once. That's why the failures we see follow a pattern:
- The edges go first. Eaves, rakes and the ridge carry the most uplift. If a panel is going to peel, it usually starts there, then the wind gets under the next one.
- Screws loosen before they let go. Years of heat and cold work exposed fasteners loose. A loose screw leaks first, then the panel starts to lift.
- Trim and closures matter. Missing foam closures and loose rake trim let wind and wasps in and give a gust something to grab.
- Old lean-tos are weak links. Additions framed lighter than the main barn, or lapped onto it badly, are where many barn roofs start to fail.
When we roof or repair a barn, the fastener spacing at the edges, the trim attachment and the condition of the purlins get the most attention, because that's what keeps the roof on the building.
Rhome permits, and barns on county land
Inside city limits, the City of Rhome issues building permits under the 2021 building and residential codes and uses a third-party inspector. Contractors on permitted work must meet the city's annual contractor registration requirements, including a surety bond. We're a registered contractor in Rhome and bonded. Many barns with a Rhome mailing address sit outside city limits in unincorporated Wise County, where the city's process doesn't apply.
Most barns with a Wise County address are outside any city limits. Wise County's own FAQ says the county does not require general building permits; inside a city or its extraterritorial jurisdiction, City Hall is the place to ask, and septic permits are required either way through Wise County Public Works at 940-627-9332. No county permit doesn't mean no rules: a barn roof still goes on to the panel maker's instructions, and a new barn still has to be built for the wind it will see.
Matching the barn to the house and the shop
Many properties around Rhome have a house, a newer shop or barndominium, and an older barn, all roofed at different times. When one of them needs work, it's a good time to plan all three. We can re-roof the old barn in a panel and color that matches the newer buildings, put standing seam on the barn that sits in full view of the house, or keep a galvanized look on a working barn you like the way it is. See barndominium roofs: R-panel, PBR or standing seam.
New barns, built by our own crews
We don't only roof barns, we build them. For a new barn, pole barn, horse barn, shop or ag building, we can bring in an architect to spec the project, or build to the specs and plans you already have. Our own crews do the work from start to finish, and the roof can go on in a color that matches the house and the other buildings so the property looks like one place.
Details that decide whether a barn roof lasts
- Condensation control if the barn is enclosed, stores hay, houses animals or has any conditioned space. A vapor barrier or insulation under the panels and ventilation that suits the use keep it from "raining" inside. See condensation control under metal.
- Ridge and eave closures that fit the panel profile, so wind-driven rain, birds and wasps stay out.
- Flashing where buildings meet: lean-tos, porches, a shop wall or a stall row added later.
- Gutters and drainage where water would otherwise sheet onto a pad, an arena entry or a doorway. See gutters.
- Skylight panels replaced with the roof, because old clear panels turn brittle and crack long before the steel wears out.
- Color match across the house, barn and shop.
How a barn roof job runs with us
- Inspection and free digital photo report: panels, fasteners, trim, purlins and framing, with measurements. You see what we see.
- Written options: re-screw, re-panel or re-roof, with the panel, gauge, color, trim and fastener plan spelled out.
- Paperwork: we check whether your barn is inside city limits or on county land, then file what applies.
- Panels formed for your building on our own roll formers, cut to the length of each roof plane so long runs don't need mid-slope laps.
- Install by our own crew, with the edges, ridge and penetrations detailed for wind.
- Clean-up and walk-through: a magnet sweep for screws and scrap, so nothing ends up in a hoof or a tire, and your warranty in writing.
Storm damage and insurance on barns
Hail dents and punctures panels and cracks old washers, and wind lifts edges and tears trim. Whether a barn is covered, and for how much, depends on your policy: some cover farm and ranch buildings fully, some cover them for less, and some treat cosmetic dents differently from leaks. Our photo report separates storm damage from age and rust, which is what an adjuster needs to see. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.
Who roofs and builds barns in Rhome?
Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:
- 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
- Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
- 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
- Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
- Our own crew, based right here in the Rhome area.
- Snow Roofing & Exteriors is BBB A+ rated.
Photos
The barn image at the top is an illustration. The photos below are real metal roofs our crews installed on houses, shown so you can see our panel, trim and seam work up close. We don't have barn job photos from Rhome on file, so we don't show any. We never show a street or address.
We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. More nearby: barn roofing in Boyd, barn roofing in Justin, barn roofing in Decatur, standing seam in Rhome, metal roofing in Wise County and our Rhome roofing page.
Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.
Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.
