Offices in Bridgeport · Decatur · Rhome · Class 3+ impact-rated shingles on every roof Call (817) 733-9228
Snow Roofing & Exteriors logo

Free Roof Replacement Estimate

📞 Call (817) 733-9228
Justin, TX · Barn roofing

Barn Roofing in Justin, TX

Snow Roofing & Exteriors roofs, repairs and builds barns, pole barns, horse barns, hay barns and shops around Justin, about 7 road miles (roughly 11 minutes) from our Rhome office. We form standing seam and R-panel on our own roll formers in 24 or 26 gauge, offer corrugated and PBR panels too, and our own crew does the work. Call (817) 733-9228.

Barns in a dairy town that's filling in fast

Justin sits where Farm Roads 156 and 407 cross in southwestern Denton County. The Handbook of Texas records a short-lived French Icarian colony here in 1848, a town that began with the sale of lots in 1883, and a name taken from Justin Sherman, chief engineer of the Santa Fe line. It incorporated in 1947 and spent most of the 1900s as a wheat and dairy town. Then the commuters came: Census estimates show Justin growing from 4,399 residents in 2020 to about 7,285 in 2025, roughly 66 percent in five years.

The old dairy and wheat country hasn't disappeared, it's just surrounded. Around Justin you still find dairy barns, hay barns, equipment sheds and horse barns on the roads toward Ponder, Rhome and Haslet, many with roofs older than the subdivisions across the road. You also find a lot of new owners on five, ten and twenty acres building shops, barndominiums and horse barns of their own. Justin is also one of the closest Denton County towns to our Rhome office, so these are buildings we drive past every week.

Which metal goes on which building

A barn roof isn't one product. What goes on a hay barn in Justin isn't always what belongs on a horse barn or a shop you can see from the back porch. Here's how we match the panel to the building:

BuildingWhat we usually recommendWhy
Hay barn, equipment barn, loafing shedR-panel or PBR, 24 or 26 gaugeStrong ribs that span open purlins, quick to install, easy to repair a panel at a time
Pole barn or post-frame buildingR-panel or PBR, with closures and trim made for the panelThe screw pattern at the eaves, rakes and ridge is what holds it down in a storm
Horse barn, stable or covered arenaR-panel, PBR or standing seam, with ventilation and condensation plannedAnimals add moisture to the air, and bare steel sweats over it
Show barn, or a barn in full view of the houseStanding seamHidden fasteners, clean lines and no exposed screws to re-tighten later
Barndominium or barn with living spaceStanding seam or R-panel over a planned insulation and vapor layerSee barndominium, shop and ag roofs
Sheds, carports, boat and RV coversCorrugated, R-panel or PBRMatches older buildings and keeps small jobs simple

We form standing seam and R-panel on our own roll formers in 24 or 26 gauge, and we also offer corrugated and PBR panels. Metal lead time is typically 1 to 2 weeks. We don't post prices, because building size, framing condition, tear-off and trim change the number a lot. You get a written price for your building.

Re-screw, re-panel or re-roof?

Most old barn roofs don't have to come off. We walk the roof where it's safe, fly a drone where it isn't, look at the purlins from inside, and show you the photos behind our call:

  • Re-screw: the panels are sound, but rubber washers have cracked in the sun or screws have backed out. New fasteners, one size up where the holes have worn oval, can add years to a roof that's otherwise fine.
  • Partial re-panel: some panels are rusted through, punctured by hail or bent by wind, usually along the eaves, the rakes or an old lean-to. We replace those panels and fix the trim and closures around them.
  • Full re-roof: rust is widespread, the old panels are too thin to hold a screw, or the barn is being enclosed or finished for living space and needs an insulation and vapor plan. See metal roof repair and restoration.

Whichever it is, we check the framing first. A new roof on rotted or undersized purlins is money spent twice.

Wind and hail around Justin

NOAA's Storm Events Database records the storms that matter for buildings on open land around Justin:

  • April 30, 2019, EF-1 tornado: it formed in open pasture about 1.2 miles east-southeast of Justin, crossed Denton Creek just east of the FM 407 bridge, where it snapped and twisted large hardwoods with winds estimated at 85 to 90 mph, and ended near a Northlake subdivision where several homes had minor roof damage.
  • March 27, 2018: wind damage to a barn off Swafford Road, about three miles southwest of Ponder and roughly four miles from Justin.
  • March 4, 2025: the Alliance Airport weather station, about seven miles south, measured a 76 mph gust, and multiple hangars were damaged with planes blown into each other.
  • October 10, 2021: near Ford, about ten miles west, NOAA lists multiple structures damaged or destroyed, most of it peeled-off metal roofs.

Hail is common here. NOAA lists 41 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Justin from 2016 through the September 2026 update. The biggest close to town was 3.4-inch hail near Justin on April 1, 2024, about three miles from the center of town, with 4-inch hail near Ponder on May 10, 2021 and 1.75-inch hail about six miles from town on June 2, 2024.

What wind does to a barn roof

A house is closed on all sides. Most barns aren't. Wind blowing into an open bay or a big door pushes up on the underside of the roof while it pulls on the top, so a barn roof takes load from both sides at once. That's why the failures we see follow a pattern:

  • The edges go first. Eaves, rakes and the ridge carry the most uplift. If a panel is going to peel, it usually starts there, then the wind gets under the next one.
  • Screws loosen before they let go. Years of heat and cold work exposed fasteners loose. A loose screw leaks first, then the panel starts to lift.
  • Trim and closures matter. Missing foam closures and loose rake trim let wind and wasps in and give a gust something to grab.
  • Old lean-tos are weak links. Additions framed lighter than the main barn, or lapped onto it badly, are where many barn roofs start to fail.

When we roof or repair a barn, the fastener spacing at the edges, the trim attachment and the condition of the purlins get the most attention, because that's what keeps the roof on the building.

Justin's permit rules for barns

Justin is unusual. The city's building FAQ says roof repairs or replacements don't require a permit, so re-roofing an existing barn inside the city is not permitted work. Building a new one is different: the same FAQ says adding a new structure to the property requires a permit unless it's 120 square feet or under. For a new barn or shop in town, that means:

  • Registered contractors. All general contractors and subcontractors register with the city ($50) before pulling a permit.
  • Online only. Applications go through the city's iWorQ portal, and the city says permits take 10 business days to review.
  • No early start. No work may begin before the permit is issued, and starting early brings added fees. We schedule your build around the review.

Because no city inspector looks at a re-roof in Justin, get the scope in writing: panel, gauge, fastener plan, trim and closures, and what happens if purlins are bad. We put that in every estimate. Much of the land around Justin is outside the city limits on county land, where Denton County's Development Services department requires a Development Permit for any new building or structure in unincorporated areas. We check which applies before we build.

Old dairy barns and new shops on the same road

Around Justin, the same road can have a decades-old dairy barn and a shop that went up last spring. They need different answers. The old barn usually needs its framing checked, rotted purlins replaced and a decision about whether the old panels can be re-screwed or should come off. The new shop usually needs nothing more than the right panel, closures and a condensation plan from day one, which is far easier to get right before the insulation goes in than after. If you're buying acreage with a barn on it, we'll inspect it and give you a written report on what it needs.

New barns, built by our own crews

We don't only roof barns, we build them. For a new barn, pole barn, horse barn, shop or ag building, we can bring in an architect to spec the project, or build to the specs and plans you already have. Our own crews do the work from start to finish, and the roof can go on in a color that matches the house and the other buildings so the property looks like one place.

Details that decide whether a barn roof lasts

  • Condensation control if the barn is enclosed, stores hay, houses animals or has any conditioned space. A vapor barrier or insulation under the panels and ventilation that suits the use keep it from "raining" inside. See condensation control under metal.
  • Ridge and eave closures that fit the panel profile, so wind-driven rain, birds and wasps stay out.
  • Flashing where buildings meet: lean-tos, porches, a shop wall or a stall row added later.
  • Gutters and drainage where water would otherwise sheet onto a pad, an arena entry or a doorway. See gutters.
  • Skylight panels replaced with the roof, because old clear panels turn brittle and crack long before the steel wears out.
  • Color match across the house, barn and shop.

How a barn roof job runs with us

  1. Inspection and free digital photo report: panels, fasteners, trim, purlins and framing, with measurements. You see what we see.
  2. Written options: re-screw, re-panel or re-roof, with the panel, gauge, color, trim and fastener plan spelled out.
  3. Paperwork: we check whether your barn is inside city limits or on county land, then file what applies.
  4. Panels formed for your building on our own roll formers, cut to the length of each roof plane so long runs don't need mid-slope laps.
  5. Install by our own crew, with the edges, ridge and penetrations detailed for wind.
  6. Clean-up and walk-through: a magnet sweep for screws and scrap, so nothing ends up in a hoof or a tire, and your warranty in writing.

Storm damage and insurance on barns

Hail dents and punctures panels and cracks old washers, and wind lifts edges and tears trim. Whether a barn is covered, and for how much, depends on your policy: some cover farm and ranch buildings fully, some cover them for less, and some treat cosmetic dents differently from leaks. Our photo report separates storm damage from age and rust, which is what an adjuster needs to see. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.

Who roofs and builds barns in Justin?

Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:

  • 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
  • Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
  • 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
  • Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
  • Our own crew, about 7 road miles (roughly 11 minutes) from Justin at our Rhome office.
  • Snow Roofing & Exteriors is BBB A+ rated.

Photos

The barn image at the top is an illustration. The photos below are real metal roofs our crews installed on houses, shown so you can see our panel, trim and seam work up close. We don't have barn job photos from Justin on file, so we don't show any. We never show a street or address.

We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. More in Justin: metal roofing in Justin, standing seam in Justin, storm damage in Justin, siding in Justin, metal roofs on Justin acreage and ranch homes and our Justin roofing page. Nearby: barn roofing in Argyle, barn roofing in Krum and pole barn and hay barn roofs.

Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.

Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.

Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.

Request a free inspection or call (817) 733-9228. Small repairs are welcome too.

Frequently asked questions

Who roofs barns in Justin?

Snow Roofing & Exteriors roofs, repairs and builds barns, pole barns, horse barns, hay barns and shops around Justin. It is a family roofing business that goes back 75 years, owner Blake Snow has 30 years in the business, the company has completed over $80 million in roofing projects, and it has 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. Standing seam and R-panel are formed on its own roll formers in 24 or 26 gauge. The Rhome office is about 7 road miles (roughly 11 minutes) away. Call (817) 733-9228.

Do I need a permit to re-roof a barn in Justin?

Not inside the city. Justin’s building FAQ says roof repairs or replacements don’t require a permit. Because no city inspector checks the work, get the panel, gauge, fastener plan and trim in writing. We put that in every estimate.

Do I need a permit to build a new barn in Justin?

Yes, inside the city, unless it is 120 square feet or under. Justin requires a permit to add a new structure, filed through iWorQ by a registered contractor, with about 10 business days for review and no work before it’s issued. On county land, Denton County requires a Development Permit for new buildings.

Has wind damaged barns around Justin?

Yes. NOAA lists wind damage to a barn about three miles southwest of Ponder on March 27, 2018, an EF-1 tornado that formed in pasture just east-southeast of Justin on April 30, 2019, and a 76 mph gust at Alliance Airport on March 4, 2025 that damaged multiple hangars.

I’m buying acreage with an old barn. Can you inspect it?

Yes. We inspect the panels, fasteners, trim, purlins and framing and give you a written photo report on whether it needs a re-screw, new panels or a new roof.

R-panel or PBR for my barn?

Both are exposed-fastener ribbed panels and both work on barns. PBR adds a purlin-bearing leg at the side lap for more bearing where panels overlap. We pick based on your framing, span and how the building is used.

Can you fix my old barn roof instead of replacing it?

Often, yes. If the panels are sound and only the screws and washers have failed, a re-screw can buy years. If some panels are rusted or damaged, we replace those. We recommend a full re-roof only when rust is widespread, the panels are too thin to hold a screw, or the barn is being enclosed.

Do you build new barns or only roof them?

Both. We can bring in an architect to spec a new barn, pole barn, horse barn or ag building, or build to your existing specs and plans. Our own crews do the building from start to finish.

What gauge metal do you put on a barn?

Our standing seam and R-panel roofs are 24 or 26 gauge, formed on our own roll formers. We also offer corrugated and PBR panels.

Why does my metal barn roof drip on the inside?

Usually that is condensation: warm, humid air meeting cold steel. It is fixed with a vapor barrier or insulation under the panels and ventilation that fits how the building is used.

How soon can you start a barn roof?

Metal lead time is typically 1 to 2 weeks because we form standing seam and R-panel on our own roll formers. Install time depends on the building size, tear-off and weather.

Will insurance pay for a hail-damaged barn roof?

It depends on your policy. Some policies cover farm and ranch buildings fully, some for less, and some treat cosmetic dents differently from leaks. We document the damage with photos and meet your adjuster. In Texas you generally have 1 year from the date of loss to file; check your policy.

What warranty comes with a barn roof?

Our workmanship warranty is from 10 years up to lifetime, depending on the job, plus the manufacturer’s warranty on the panel and finish, in writing.

Get a free roof inspection

We get on the roof, photograph what we find, and tell you plainly whether you need a repair or a replacement.

Free Roof Replacement Estimate

📞 Call (817) 733-9228

Certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake

Atlas Roofing certified contractor
📞 (817) 733-9228