Barns, shops and lake property around Runaway Bay
Runaway Bay sits on the shore of Lake Bridgeport off Highway 380. The lake is a Tarrant Regional Water District reservoir on the West Fork of the Trinity River whose dam was finished in 1931. Census estimates show the city growing from 1,543 residents in the 2020 base to about 2,212 in 2025. Inside the city it's lake homes, golf course lots and weekend places, and the outbuildings are garages, boat and RV ports and workshops. Outside the city, toward Bridgeport, Chico and the Jack County line, it's acreage: hay barns, horse barns, pole barns and newer shops.
Our Bridgeport office is about 12 road miles (roughly 20 minutes) away, so we're close when a storm comes across the lake. For lake-home roofs, see our Runaway Bay and Lake Bridgeport roofing page.
Which metal goes on which building
A barn roof isn't one product. What goes on a hay barn in Runaway Bay isn't always what belongs on a horse barn or a shop you can see from the back porch. Here's how we match the panel to the building:
| Building | What we usually recommend | Why |
|---|---|---|
| Hay barn, equipment barn, loafing shed | R-panel or PBR, 24 or 26 gauge | Strong ribs that span open purlins, quick to install, easy to repair a panel at a time |
| Pole barn or post-frame building | R-panel or PBR, with closures and trim made for the panel | The screw pattern at the eaves, rakes and ridge is what holds it down in a storm |
| Horse barn, stable or covered arena | R-panel, PBR or standing seam, with ventilation and condensation planned | Animals add moisture to the air, and bare steel sweats over it |
| Show barn, or a barn in full view of the house | Standing seam | Hidden fasteners, clean lines and no exposed screws to re-tighten later |
| Barndominium or barn with living space | Standing seam or R-panel over a planned insulation and vapor layer | See barndominium, shop and ag roofs |
| Sheds, carports, boat and RV covers | Corrugated, R-panel or PBR | Matches older buildings and keeps small jobs simple |
We form standing seam and R-panel on our own roll formers in 24 or 26 gauge, and we also offer corrugated and PBR panels. Metal lead time is typically 1 to 2 weeks. We don't post prices, because building size, framing condition, tear-off and trim change the number a lot. You get a written price for your building.
Re-screw, re-panel or re-roof?
Most old barn roofs don't have to come off. We walk the roof where it's safe, fly a drone where it isn't, look at the purlins from inside, and show you the photos behind our call:
- Re-screw: the panels are sound, but rubber washers have cracked in the sun or screws have backed out. New fasteners, one size up where the holes have worn oval, can add years to a roof that's otherwise fine.
- Partial re-panel: some panels are rusted through, punctured by hail or bent by wind, usually along the eaves, the rakes or an old lean-to. We replace those panels and fix the trim and closures around them.
- Full re-roof: rust is widespread, the old panels are too thin to hold a screw, or the barn is being enclosed or finished for living space and needs an insulation and vapor plan. See metal roof repair and restoration.
Whichever it is, we check the framing first. A new roof on rotted or undersized purlins is money spent twice.
The April 2026 tornado and other storms around the lake
NOAA's damage survey for April 25, 2026 describes an EF-2 tornado on the southwest side of Runaway Bay with peak winds estimated at 130 mph. It formed just south of Highway 380 near Port O Call Drive, grew to about half a mile wide, and crossed the neighborhood between Cimmarron Trail and Jasper Creek Road, where most homes took EF-0 to EF-1 damage: broken windows, failed garage doors and substantial roof damage, with manufactured homes heavily damaged or destroyed. NOAA's Storm Events Database also lists, close to the lake:
- March 18, 2020, EF-0 tornado: it began in western Wise County near El Lago Road, damaged property along Moonlight Bay Drive, and tore off the roof over a garage when wind got inside it, then crossed the lake. NOAA estimates 110 mph winds.
- July 27, 2021: emergency management reported roofs blown off homes near Lake Bridgeport, including decking and insulation on at least one home.
- March 4, 2025: the roof was ripped off the second story of a home on County Road 1742.
- July 20, 2022: about 11 miles away, emergency management reported a barn blown down east of Perrin in rural southeast Jack County.
Hail: NOAA lists 9 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Runaway Bay from 2016 through the September 2026 update. The same April 25, 2026 storm dropped 2.75-inch hail at Bridgeport Municipal Airport, about half a mile from the center of Runaway Bay. On May 17, 2025, 2.75-inch hail fell at the airport again and 3.25-inch hail fell near Joplin in Jack County, about nine miles southwest. Wise County as a whole logged 40 such reports, up to 4.5 inches.
What wind does to a barn roof
A house is closed on all sides. Most barns aren't. Wind blowing into an open bay or a big door pushes up on the underside of the roof while it pulls on the top, so a barn roof takes load from both sides at once. That's why the failures we see follow a pattern:
- The edges go first. Eaves, rakes and the ridge carry the most uplift. If a panel is going to peel, it usually starts there, then the wind gets under the next one.
- Screws loosen before they let go. Years of heat and cold work exposed fasteners loose. A loose screw leaks first, then the panel starts to lift.
- Trim and closures matter. Missing foam closures and loose rake trim let wind and wasps in and give a gust something to grab.
- Old lean-tos are weak links. Additions framed lighter than the main barn, or lapped onto it badly, are where many barn roofs start to fail.
When we roof or repair a barn, the fastener spacing at the edges, the trim attachment and the condition of the purlins get the most attention, because that's what keeps the roof on the building.
Runaway Bay's rules for barns, shops and secondary buildings
Runaway Bay has stricter building rules than most small towns around here, and they matter for anything with a metal roof. Inside the city limits, the zoning ordinance posted on the city’s website (Ordinance 27, last updated in 2014 in the posted copy) says:
- Secondary buildings on regular residential lots (shops, storage buildings, detached garages and ports): one per lot, no living quarters, at least 25 feet from the front property line or 5 feet behind the front of the house, whichever is greater, and no taller than 20 feet or larger than 1,200 square feet of enclosed floor.
- Those buildings need wood or masonry siding, with no metal, in a color that matches the house. The roof has to be hip or gable at a 4/12 pitch or steeper, with shingles that match the house or metal in a color that matches the shingles as closely as possible.
- Over 12 feet of roof height or at 1,200 square feet, the building has to meet the city's 55 percent masonry requirement, and open structures need masonry columns that match the house.
- Ranchette lots (the R-2 district, platted lots of two acres or more) allow an animal shelter, such as a horse barn, up to 30 feet to the peak, in the backyard at least 60 feet from the front property line, once the house is at least half built. Its roof has to match the house and be hip or gable at 4/12 or steeper, and wood, brick, metal or masonry are all acceptable building materials. The building inspector approves it.
- No building permit is issued for anything at or below the 844.5-foot base flood elevation, except fences and gazebos.
The city's fee schedule charges single-family new construction and additions $0.85 per gross square foot, plus plan review at 65 percent of the permit fee where plan review applies, and contractors pay $100 for a city contractor's license and $50 to renew. Accessory buildings have to be finished within 90 days of the permit. Those are city fees, not our price. Ordinances get amended, so we confirm the current rules with City Hall before we draw or order anything.
Many barns with a Runaway Bay or Bridgeport address are outside the city limits. Most barns with a Wise County address are outside any city limits. Wise County's own FAQ says the county does not require general building permits; inside a city or its extraterritorial jurisdiction, City Hall is the place to ask, and septic permits are required either way through Wise County Public Works at 940-627-9332. No county permit doesn't mean no rules: a barn roof still goes on to the panel maker's instructions, and a new barn still has to be built for the wind it will see.
Metal roofs that fit Runaway Bay's look
Inside the city, a shop or garage roof has to read as part of the house: hip or gable, 4/12 or steeper, and in metal, a color matched to the house's shingles. That's where standing seam earns its keep. It has no exposed screws, comes in colors that pair with most shingle blends, and looks finished from the street and from the water. We form it on our own roll formers, so trim, ridge and panel colors all match. Out on acreage, where a working barn just has to stay dry and stay on, R-panel or PBR is usually the better value.
Boat and RV covers near the lake take the same wind as everything else on an open shoreline. We plan the fastener pattern at the eaves, rakes and ridge for that exposure, and we check the city's rules for ports, paved drives and setbacks before we price one.
New barns, built by our own crews
We don't only roof barns, we build them. For a new barn, pole barn, horse barn, shop or ag building, we can bring in an architect to spec the project, or build to the specs and plans you already have. Our own crews do the work from start to finish, and the roof can go on in a color that matches the house and the other buildings so the property looks like one place.
Details that decide whether a barn roof lasts
- Condensation control if the barn is enclosed, stores hay, houses animals or has any conditioned space. A vapor barrier or insulation under the panels and ventilation that suits the use keep it from "raining" inside. See condensation control under metal.
- Ridge and eave closures that fit the panel profile, so wind-driven rain, birds and wasps stay out.
- Flashing where buildings meet: lean-tos, porches, a shop wall or a stall row added later.
- Gutters and drainage where water would otherwise sheet onto a pad, an arena entry or a doorway. See gutters.
- Skylight panels replaced with the roof, because old clear panels turn brittle and crack long before the steel wears out.
- Color match across the house, barn and shop.
How a barn roof job runs with us
- Inspection and free digital photo report: panels, fasteners, trim, purlins and framing, with measurements. You see what we see.
- Written options: re-screw, re-panel or re-roof, with the panel, gauge, color, trim and fastener plan spelled out.
- Paperwork: we check whether your barn is inside city limits or on county land, then file what applies.
- Panels formed for your building on our own roll formers, cut to the length of each roof plane so long runs don't need mid-slope laps.
- Install by our own crew, with the edges, ridge and penetrations detailed for wind.
- Clean-up and walk-through: a magnet sweep for screws and scrap, so nothing ends up in a hoof or a tire, and your warranty in writing.
Storm damage and insurance on barns
Hail dents and punctures panels and cracks old washers, and wind lifts edges and tears trim. Whether a barn is covered, and for how much, depends on your policy: some cover farm and ranch buildings fully, some cover them for less, and some treat cosmetic dents differently from leaks. Our photo report separates storm damage from age and rust, which is what an adjuster needs to see. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.
Who roofs and builds barns in Runaway Bay?
Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:
- 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
- Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
- 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
- Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
- Our own crew, working about 12 road miles (roughly 20 minutes) from Runaway Bay out of our Bridgeport office.
- Snow Roofing & Exteriors is BBB A+ rated.
Photos
The barn image at the top is an illustration. The photos below are real metal roofs our crews installed on houses, shown so you can see our panel, trim and seam work up close. We don't have barn job photos from Runaway Bay on file, so we don't show any. We never show a street or address.
We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. More nearby: barn roofing in Bridgeport, barn roofing in Chico, barn roofing in Jacksboro, metal roofing in Wise County and our Runaway Bay roofing page.
Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.
Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.
