Standing seam on modern farmhouses is the request I hear most from Northlake homeowners right now. White board-and-batten, black windows, cedar porch posts and a steep gable roof: it’s a style that looks unfinished with ordinary shingles and looks right with long, clean metal panels.
I’m Blake Snow. I’ve been roofing for 30 years, I’m the third generation in a family business that goes back 75 years, and our crews have completed over $80 million in roofing projects. Our Rhome office is a short drive west of Northlake, and we form our own standing seam on our own roll formers. Here’s how I’d plan a standing seam roof on a Northlake farmhouse.
The short version
- Standing seam suits the style. Clean vertical lines, hidden fasteners, crisp ridges and gable edges.
- Pick the color from the windows and trim. Matte black is classic; charcoal and dark bronze are softer.
- Decide on full metal or a metal accent. Some homes go all metal; others put standing seam on the porch and bay roofs.
- Plan for Denton County hail and wind. Panels run ridge to eave in one piece, with edges fastened for wind.
- Get HOA and town approval first. Then we order the panels.
Why standing seam fits a modern farmhouse
A modern farmhouse is designed around a few strong lines: tall gables, a long porch, black-framed windows. Standing seam repeats those lines. The raised seams run straight from ridge to eave, the fasteners stay hidden under the seam, and the gable trim gives a sharp edge against the sky.
| What you notice | Standing seam | Architectural shingles |
|---|---|---|
| Lines | Straight vertical seams | Textured, horizontal |
| Fasteners | Hidden under the seams | Nailed, covered by the course above |
| Gable and ridge edges | Crisp metal trim | Shingle cap and drip edge |
| Hail | Can dent; doesn’t crack or shed granules | Class 3 or better on every roof we install |
| Upkeep | Very low | Inspect after big storms |
Shingles are still a fair choice, and every shingle roof we install is Class 3 or better. But on a farmhouse, homeowners who choose standing seam usually say it’s the roof the house was drawn for.
Full metal roof or a porch accent?
There are two common ways to do it:
- Full standing seam. Every slope in metal. This gives the strongest look and the lowest upkeep.
- Shingle main roof with standing seam accents. Metal over the front porch, bay windows or dormers, with designer shingles on the main roof. It’s a good way to get the look on a tighter budget.
If you go with accents, the colors need to work together. Black shingles with black metal is the easy match. A charcoal or weathered-wood shingle usually pairs better with charcoal or dark bronze metal. I’ll bring samples so you can see them against your siding and brick.
Seams, panels and the small details
Not every standing seam roof looks the same up close. These are the choices that change the look:
- Panel width. Narrower panels give more seams and a busier, more traditional farmhouse look. Wider panels look more modern and minimal.
- Striations or flat pans. Light striations in the flat part of the panel help reduce oil canning, the slight waviness you can see on wide flat metal in low sun.
- Seam profile. A clean, tall seam reads well from the street on steep gables.
- Trim. Gable trim, ridge and eave details should be the same color as the panels for a crisp edge.
- Gutters. Black or dark bronze seamless gutters finish the farmhouse look. On steep metal, we talk about rain run-off at the porch so water lands where you want it.
We form panels on our own roll formers so they run ridge to eave in one piece on most farmhouse roofs, with no end laps to leak.
Color: black, charcoal or dark bronze
| Your house | Color I usually suggest | Why |
|---|---|---|
| White board-and-batten, black windows | Matte black | The classic modern farmhouse pairing |
| White or cream with stone accents | Charcoal | Softer, picks up gray in the stone |
| Brick or warm stone | Dark bronze | Ties into warm masonry and cedar posts |
| Lots of west sun | Mid-tone gray or a lighter finish | Reflects more heat than black |
The paint system matters as much as the color. A PVDF (Kynar 500) finish holds its color longer than SMP. My post on PVDF vs. SMP metal roof paint explains the difference, and our metal roof colors and finishes page shows the options.
Hail and wind around Northlake
Northlake sits on open ground along I-35W in Denton County, and storms come through often. NOAA’s Storm Events Database lists 1-inch hail west-northwest of Justin, a few miles from Northlake, on May 24, 2026. On November 24, 2025, the Storm Prediction Center logged quarter-size hail west of Justin and in Ponder, and 1.75-inch hail in north Rhome, all within a few minutes.
Hail that size doesn’t crack steel or knock off granules. Very large hail can dent it, but a dent isn’t a leak. Wind is the bigger test on a farmhouse with tall gables: roofs fail at the edges first. We tighten clip spacing near the edges and corners and fasten eave, rake and ridge trim so wind can’t get under it. If a storm already hit your roof, Texas generally gives you 1 year from the date of loss to file a claim; check your policy. Our storm damage inspections start with a free digital photo report.
Permits and HOA approval in Northlake
The Town of Northlake says most home improvement projects require a permit, and its development code requires a building permit before a structure is altered. The town runs permits online through Development Services, with inspections along the way. We confirm the job with the town and pull the permit whenever one is required.
Many Northlake homes are in master-planned communities with architectural review. Those rules differ by community, so we:
- Get your HOA’s current roofing guidelines.
- Help you put together the submittal: panel profile, color name and a sample or photo.
- Wait for written approval before we order the metal.
My post on standing seam vs. Enviroshake on a Westlake modern farmhouse covers another option if your HOA leans toward a shake look.
Questions to ask any metal roofer
- Is it true standing seam with hidden fasteners, or exposed-fastener panel?
- What gauge, and who forms the panels? (Ours are 24 or 26 gauge; my post on 26 vs. 29 gauge explains why we don’t go thinner.)
- Will the panels run ridge to eave in one piece?
- How are the gables, eaves and ridge fastened for wind?
- Will you handle the HOA submittal and the town permit?
- What’s the workmanship warranty, in writing?
Areas we serve around Northlake
We install standing seam on homes across Northlake and nearby, including Argyle, Justin, Roanoke, Trophy Club, Haslet, Ponder and Rhome.
Let’s look at your roof
We’re certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. Snow Roofing & Exteriors is fully insured, has offices in Bridgeport, Decatur and Rhome, is BBB A+ rated, and has 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. References are available on request. Our workmanship warranty runs from 10 years up to lifetime, depending on the job, and our metal lead time is typically 1 to 2 weeks.
Call (817) 733-9228 or request an estimate. I’ll walk the roof with you and give you a free digital photo report and a plan in writing.

