Snow Roofing & Exteriors logo Call (817) 733-9228
Arlington, TX · Metal roofing

Metal Roofing in Arlington, TX

Metal roofing in Arlington, TX covers everything from 1950s ranch houses to warehouses in the Great Southwest area, in a city where NOAA lists an EF-2 tornado that ripped large sections of roof off apartment buildings in 2020 and 3.25-inch hail about a mile and a half from the center of town in 2024. Snow Roofing & Exteriors installs every kind of metal roof here: standing seam, stone-coated steel and metal shingles, R-panel, PBR and corrugated, all in 24 or 26 gauge with standing seam and R-panel formed on our own roll formers. Our Rhome-area team is about 47 road miles (roughly an hour) away. Call (817) 733-9228.
  • Hidden screws and clean, straight lines
  • Formed on our own roll formers, right on the job
  • 24 or 26 gauge steel in many colors
  • Workmanship warranty from 10 years up to lifetime, depending on the job
Illustration of a modern farmhouse with a bronze standing seam metal roof

A big city with every kind of roof

Arlington sits halfway between Dallas and Fort Worth in eastern Tarrant County. The Handbook of Texas says it was founded in 1876 on the Texas and Pacific Railway as a market town for the surrounding farms, with stores and settlers moving a few miles north from Johnson Station, the frontier outpost and stagecoach stop Middleton Tate Johnson started in 1846; the post office took the name Arlington, after Robert E. Lee's Virginia home, in 1877, and the town incorporated in 1884. Arlington had 7,692 residents in 1950 and an estimated 19,000 by 1953, and the General Motors plant that opened on January 6, 1954 brought an estimated 125 new families a month that spring. Census estimates now put the city at about 402,100 people, the third-largest in the Metroplex, with neighborhoods from the 1950s onward, the University of Texas at Arlington, the entertainment district, and industrial and warehouse roofs across the Great Southwest area.

Here is how we usually match metal to what's on the ground in Arlington:

PropertyWhat we usually recommend
Postwar or 1960s-80s ranch homeStanding seam in charcoal, black or dark bronze over the brick, or stone-coated steel for a shingle or shake look
Newer two-story in an HOA neighborhoodStone-coated steel or metal shingles the association will approve; standing seam on porches and bays
Warehouse, shop or industrial buildingR-panel or PBR re-panel or retrofit, or standing seam where the owner wants hidden fasteners; see warehouse roofing in Arlington
Church, school or officeStanding seam on pitched sections and a proper low-slope system where the roof is too flat; see church roofing in Arlington
Apartments and mini-storageR-panel, PBR or standing seam on pitched buildings, with edges set for wind; see apartment roofing and mini-storage roofing
Garage, carport, patio cover, boat or RV coverR-panel, PBR or corrugated, or standing seam to match the main roof

Every kind of metal roof, not just one

Most "metal roofing" searches in Arlington start with standing seam, but it isn't the only right answer. Here's what we install and where each one fits:

Metal systemWhat it looks likeWhere it fits best
Standing seamFlat pans with raised seams, fasteners hiddenFull roofs on modern, farmhouse and transitional homes; porch and bay accents
Stone-coated steelSteel with a stone granule finish shaped like shake, tile or shingleOwners who want metal's strength but a traditional look a neighborhood is used to
Metal shingles and metal tilePressed steel panels in shingle, slate or tile profilesHomes where the street view has to read as shingle, slate or tile
Copper accentsBright copper that weathers to brown, then greenBay windows, entry roofs, dormers and cupolas on traditional homes
R-panel, PBR and corrugatedRibbed panels with exposed screws and washersShops, barns, garages, pool cabanas, boat and RV covers

We don't quote prices on the web because pitch, size, tear-off and detail work move them too much. We'll give you a written number for each option that makes sense on your roof.

Commercial metal in Arlington: R-panel, PBR and standing seam

Metal is usually the better answer on a commercial or multifamily roof that has already been through a wind or hail event. We form standing seam and R-panel on our own roll formers in 24 or 26 gauge and also supply PBR and corrugated, so a Arlington building owner can compare systems from one contractor. Where the roof is low-slope, we check the manufacturer's minimum slope for the exact panel and seam, and where it's too flat for any steep-slope panel we say so and price the right low-slope system instead. For commercial roofs we offer 10- and 20-year NDL warranties at different prices, and we put the scope, the edge details and the warranty terms in writing. See commercial roofing for the other systems we install.

On a commercial building, Arlington prices the reroof permit on the project's valuation rather than a flat fee, so we put the full scope and value in the application and show you the City's fee before you sign. See commercial roofing in Arlington.

Arlington's wind record

NOAA's event narratives show tornadoes and straight-line wind taking roofs in Arlington:

  • November 24, 2020: an EF-2 tornado (maximum winds around 115 mph) crossed Arlington from near West Mayfield Road and South Bowen Road toward East Park Row Drive, with significant roof damage along Colorado Lane, damage to businesses and warehouses near South Cooper Street, and large sections of roof ripped off two apartment buildings.
  • June 16, 2019: a brief EF-1 tornado east of Collins Street left a few homes with significant loss of roofing, straight-line winds of 60 to 70 mph removed shingles from several homes and an apartment complex southwest of AT&T Stadium, and a 69 mph gust was measured in Dalworthington Gardens.
  • March 29, 2017: roof damage at a church and sections of brick wall blown over near Ponselle Drive and Matlock Road.
  • September 8, 2023: a metal boat dock destroyed near Lake Arlington.
  • May 28, 2024: a 58 mph gust measured at Arlington Municipal Airport.

An apartment roof ripped off by a tornado and a metal boat dock torn apart by a downburst are the same lesson: metal fails at its edges and fasteners, not in the middle of the panel. On an Arlington roof we use:

  • Tighter clip and fastener spacing at the perimeter (eaves, rakes, hips and ridge), where uplift is highest, following the manufacturer's tested pattern.
  • Trim made for the panel, hemmed and cleated, instead of face-screwed loose trim that wind can catch.
  • Deck and nailing checked after tear-off, because a metal roof is only as well attached as the wood under it.
  • Closures sized to the panel at the ridge and eaves so wind-driven rain stays out.

Hail across Arlington

NOAA's Storm Events Database lists 48 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of the center of Arlington from 2016 through the September 2026 update, 10 of them within about three miles, and 35 reports of hail an inch or larger within those three miles. The biggest:

  • June 12, 2023: 5-inch hail in Mansfield, about eight miles south, with 4-inch and 2.75-inch stones nearby the same evening.
  • May 27, 2024: 3.25-inch hail near Dalworthington Gardens, about a mile and a half from the center of Arlington, with 2-inch hail near Johnson Station and 2.75-inch hail in Euless and Hurst the same day.
  • May 22, 2024: 2.25-inch hail about a mile and a half from the center of the city.
  • June 1, 2025: 2.5-inch hail near Tate Springs and Lindberg, three to five miles west of the center, and 2-inch hail about a mile from the center.
  • June 6, 2018 and March 17, 2016: 2.5-inch hail in Arlington, about three miles from the center.
  • April 25, 2026: 2-inch hail near Lindberg, about five miles west of the center, and 1.75-inch hail about four miles west.

After the September 2026 NOAA update, a preliminary Storm Prediction Center report put 1.75-inch hail in south Arlington on September 11, 2026.

Metal isn't hail-proof. Very large hail can dent steel, and some policies treat cosmetic dents differently from leaks, so read the policy before you choose. A 24- or 26-gauge panel won't crack, curl or shed granules the way shingles do. See Class 4 metal roofs and insurance. Texas insurers must offer a premium credit for UL 2218 impact-rated roofs, but each company sets its own amount, and Class 4 earns the largest. We can't promise a discount; ask your insurer for their figure in writing. After a qualifying install we fill out TDI Form PC068 for you. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.

Very large hail can still dent steel, but a metal roof doesn't crack, bruise or shed granules the way a shingle does, so it usually keeps shedding water after storms that end a shingle roof's life. If you want the shingle look, stone-coated steel hides small dents in its granule coating. See Class 4 metal roofs and insurance, or compare Class 4 shingles in Arlington. Texas insurers must offer a premium credit for UL 2218 impact-rated roofs, but each company sets its own amount, and Class 4 earns the largest. We can't promise a discount; ask your insurer for their figure in writing. After a qualifying install we fill out TDI Form PC068 for you.

City of Arlington re-roof permit

Arlington draws its permit line at 10%. The City's guide to choosing a contractor says all roofing repairs greater than 10% of the roof surface require a permit, so a full re-roof always needs one. From the City's own pages:

  • One Reroof application, online. Per the City's Reroof permit notice, commercial, single-family and two-family reroof permits are applied for on ArlingtonPermits.com, and a Building Final inspection closes the permit.
  • Registered contractors only. The contractor needs an active General Contracting, New Home Builder/Remodeler or Reroof contractor registration with the City, and you can search registrations on ArlingtonPermits.com.
  • The fee is the City's, not ours. The City's Planning and Development Services fee schedule (effective October 1, 2025, Resolution No. 25-258) lists a residential Reroof permit at $325, plus the non-refundable plan review fee the schedule sets at 35% of the permit fee. Commercial reroof permits are priced on the project's valuation. Work started without a permit carries a penalty equal to the permit fee.
  • Posted on the front of the house. The City asks homeowners to make sure the contractor posts the permit on the front of the property and gets every final inspection, with the permit placard signed, before final payment.

Not sure whether your repair is over 10%? The City's Planning and Development Services staff take that question at 817-459-6502. We measure it, register, apply, post the permit and schedule the inspections.

For a metal roof, we tear off to the deck on every job instead of going over old roofing, so we can fix the decking, correct the ventilation and lay high-temperature underlayment made for metal. Any decking we replace goes into the permit scope, and we don't ask for final payment until the Building Final is signed off.

Getting metal past an HOA in Arlington

Many neighborhoods in Arlington have an HOA, and committees mostly care about how the roof reads from the street and whether the color fits the neighborhood. Stone-coated steel and metal shingles read as shake, shingle or tile from the curb; standing seam is often approved first on porches, bays and entries. We put together the product sheet, color chip, profile drawing and impact rating so the committee can decide on the first pass. Approval is always up to your HOA.

Lake Arlington, boat docks and RV covers

For lake lots near Lake Arlington and larger properties with a shop, boat or RV, we build and roof covers, carports and shop roofs in R-panel, PBR or corrugated, color-matched to the house, with the same edge trim and fastener pattern we use on a main roof, because the open sides of a cover catch wind from below. Metal lead time is typically 1 to 2 weeks. Our crews also handle siding, gutters and windows, so one crew can finish the whole exterior.

Complex roofs need more than panels

Where a roof has hips, valleys, dormers, parapets, rooftop units or wall intersections, that's where a metal roof is won or lost. Every one of those details gets flashing bent for the panel on our brake, not caulk; valleys get a full-length valley pan; curbs and chimneys get a cricket; and walls get counterflashing that lets the panel move with the heat. We draw those details into the written spec so you can see what you're paying for.

Why it matters that we form our own panels

  • One piece from eave to ridge. We cut standing seam and R-panel to the length of each roof plane, so long runs don't need mid-slope laps.
  • 24 or 26 gauge on every standing seam and R-panel roof. See 26 vs. 29 gauge.
  • No waiting in a panel shop's queue after a hailstorm, when everyone needs a roof at once. Metal lead time is typically 1 to 2 weeks.
  • Flashings bent for the panel, not caulked: walls, chimneys, valleys, skylights and pipes.
  • Every inspection comes with a free digital photo report, so you see what we see.

How a metal roof job runs with us

  1. Inspection and free digital photo report: deck, ventilation, penetrations, valleys and measurements.
  2. Written spec for each option: system, gauge, profile, color, underlayment, trim and every flashing detail.
  3. Approvals: the HOA or historic-review packet if you need one, then the permit.
  4. Tear-off and deck repair where needed, then high-temperature synthetic underlayment made for metal.
  5. Install by our own crew, with hips, ridges, eaves and penetrations detailed for the system.
  6. Final walk-through, a magnet sweep of the yard and driveway, and your warranty in writing.

Who installs metal roofs in Arlington?

Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:

  • 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
  • Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
  • 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
  • Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
  • Our own crew, about 47 road miles (roughly an hour) from Arlington with our Rhome-area team.
  • Snow Roofing & Exteriors is BBB A+ rated.

Our metal work, up close

The photos on this page show our roof work up close. We never show a street or address.

We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. We give a workmanship warranty from 10 years up to lifetime, depending on the job, and the manufacturer warranty on the panel and finish, in writing.

More in Arlington: our Arlington roofing page, commercial roofing in Arlington, warehouse roofing, apartment roofing and church roofing in Arlington. Nearby metal: Fort Worth and Irving.

After a storm, see storm damage and roof replacement in Arlington.

Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.

Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.

Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.

Request a free inspection or call (817) 733-9228. Small repairs are welcome too.

Charcoal standing seam metal roof on a brick ranch home near Rhome, TX
Charcoal standing seam on a brick ranch
Dark bronze standing seam metal roof replacing shingles on a red brick ranch home near Sanger, TX
Dark standing seam replacing shingles on a brick ranch
Standing seam metal roof on a blue board-and-batten wing of a ranch estate
Standing seam on a board-and-batten wing
Close-up of a gray standing seam metal roof with matching painted vent stacks and pipe flashings
Gray standing seam with painted vent stacks and pipe flashings
Side elevation of a brick home with multiple hips in standing seam metal
Multiple hips in standing seam
Detail of a shake-to-standing-seam metal transition
Where a shake roof meets standing seam
Close view of standing seam panels at the eave of a brick ranch home
Seams running straight to the eave
Snow Roofing crew at the panel trailer beside a brick garage during a standing seam install
Our crew and panel trailer on install day

Frequently asked questions

Who installs metal roofs in Arlington?

Snow Roofing & Exteriors installs standing seam, stone-coated steel, metal shingle, R-panel and PBR roofs on homes, garages, warehouses, churches and apartment buildings in Arlington. It is a family roofing business that goes back 75 years, owner Blake Snow has 30 years in the business, the company has completed over $80 million in roofing projects, it is BBB A+ rated, and it has 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. Standing seam and R-panel are formed on its own roll formers in 24 or 26 gauge. Its Rhome-area team is about 47 road miles (roughly an hour) away. Call (817) 733-9228.

Do I need a permit for a metal roof in Arlington?

Yes. Arlington requires a permit for any roofing work over 10% of the roof surface. The Reroof permit is applied for on ArlingtonPermits.com by a contractor with an active General Contracting, New Home Builder/Remodeler or Reroof registration, and a Building Final inspection closes it.

How much is an Arlington reroof permit?

The City's fee schedule effective October 1, 2025 lists a residential Reroof permit at $325, plus a non-refundable plan review fee of 35% of the permit fee. Commercial reroof permits are based on valuation. Those are City fees, not our price.

How do I check that a roofer is registered in Arlington?

Search the Contractor Business Registration on ArlingtonPermits.com. The City says general and construction contractors need to be registered to get a building permit, and you can see the last time a contractor pulled a permit in the city.

Can you do warehouse and commercial metal roofs in Arlington?

Yes. We install standing seam, R-panel, PBR and corrugated, and we offer 10- and 20-year NDL warranties on commercial roofs at different prices. Where a roof is too flat for a steep-slope panel, we quote the right low-slope system.

Has Arlington had big hail?

NOAA lists 48 reports of hail 1.75 inches or larger within about 10 miles of Arlington from 2016 through September 2026, including 3.25-inch hail about a mile and a half from the center of the city on May 27, 2024 and 5-inch hail in Mansfield on June 12, 2023.

Will a metal roof hold up to Arlington wind?

When the edges are done right, yes. NOAA lists an EF-2 tornado that ripped large sections of roof off two apartment buildings on November 24, 2020. We tighten clip and fastener spacing at the perimeter to the manufacturer's tested pattern.

Is standing seam the only metal option?

No. We also install stone-coated steel and metal shingles or tile for a traditional look, copper accents, and R-panel, PBR or corrugated on shops, barns and covers.

What gauge metal do you install?

24 or 26 gauge steel on every standing seam and R-panel roof. We don’t install 29 gauge on homes.

How soon can a metal roof start?

Metal lead time is typically 1 to 2 weeks, because we form standing seam and R-panel on our own roll formers. HOA approval and the permit can add time, so we start that paperwork right after you sign.

What warranty do you give on a metal roof?

A workmanship warranty from 10 years up to lifetime, depending on the job, plus the manufacturer warranty on the panel and finish, in writing.

Get a free estimate

Tell us how to reach you. Blake or the team will call you back.

Or call (817) 733-9228 snowexteriors@gmail.com