Snow Roofing & Exteriors logo Call (817) 733-9228
Irving, TX · Residential metal roofing

Irving Residential Metal Roofing

Irving residential metal roofing from Snow Roofing & Exteriors means standing seam, stone-coated steel and metal shingles on Irving homes, formed in 24 or 26 gauge on our own roll formers, plus R-panel for garages, shops and covers. Our Rhome-area team is about 36 road miles (roughly 53 minutes) away. Call (817) 733-9228.
  • Hidden screws and clean, straight lines
  • Formed on our own roll formers, right on the job
  • 24 or 26 gauge steel in many colors
  • Workmanship warranty from 10 years up to lifetime, depending on the job
Illustration of a modern farmhouse with a bronze standing seam metal roof

Irving residential metal roofing: what fits which house

Irving is on State Highways 183 and 114 about 12 miles west of Dallas, with about 257,000 residents (Census estimate). The Handbook of Texas traces it to farm communities such as Kit, Sowers, Twin Wells, Union Bower, Bear Creek and Estelle that grew up between the Elm and West Forks of the Trinity in the 1850s and were later annexed. That history shows in the housing: older brick ranch homes in the original neighborhoods, newer two-story homes in Valley Ranch and Las Colinas, and townhomes in between. A metal roof that's right on one street can be wrong on the next:

Irving homeWhat we usually recommend
Single-story brick ranch on a low or medium pitchA full standing seam roof in a dark or neutral color; it's the most common shingle-to-metal conversion we do
Two-story home with an HOA that expects a shingle lookStone-coated steel or metal shingles that read as shake or shingle from the curb
Traditional home that keeps its shingle main roofStanding seam or copper accents over porches, bays and entries
Detached garage, workshop, carport or patio coverR-panel or PBR, or standing seam to match the house
Low-slope porch or rear additionMechanically seamed standing seam, made for low slopes

Every kind of metal roof, not just one

Most "metal roofing" searches in Irving start with standing seam, but it isn't the only right answer. Here's what we install and where each one fits:

Metal systemWhat it looks likeWhere it fits best
Standing seamFlat pans with raised seams, fasteners hiddenFull roofs on modern, farmhouse and transitional homes; porch and bay accents
Stone-coated steelSteel with a stone granule finish shaped like shake, tile or shingleOwners who want metal's strength but a traditional look a neighborhood is used to
Metal shingles and metal tilePressed steel panels in shingle, slate or tile profilesHomes where the street view has to read as shingle, slate or tile
Copper accentsBright copper that weathers to brown, then greenBay windows, entry roofs, dormers and cupolas on traditional homes
R-panel, PBR and corrugatedRibbed panels with exposed screws and washersShops, barns, garages, pool cabanas, boat and RV covers

We don't quote prices on the web because pitch, size, tear-off and detail work move them too much. We'll give you a written number for each option that makes sense on your roof.

Converting an Irving brick ranch from shingles to standing seam

Many Irving ranch homes are on their third or fourth shingle roof, often after a hail claim. Moving to metal is a good time to fix what the old roofs left behind: we replace soft decking, rebuild the ventilation so the attic isn't cooking the new underlayment, and re-flash every wall, chimney and vent. Panels run in one piece from eave to ridge, so a typical ranch roof has no mid-slope laps at all. Gutters usually need to be checked at the same time, since metal sheds water faster and harder than shingles.

Snap-lock or mechanically seamed?

Snap-lockMechanically seamed
How the seam closesPanels snap together by handA seaming tool folds the seam closed along its length
Best onMost steep-slope house roofsLow-slope porches and wings, and very long runs
Look from the streetClean, slim seamSlightly heavier seam; same concealed fasteners

More detail: snap-lock vs. mechanical lock. We use 24 or 26 gauge steel and never 29 gauge on a home (why). We don't publish prices because size, pitch, tear-off and detail work move them too much; our standing seam cost page explains what moves the number, and you get a written price for your roof.

City of Irving re-roof permits

Irving's residential roof permit guidelines say the city requires a building permit on all re-roofing projects, the contractor must be registered with the City, and the permit has to be issued before work starts. Repairs of 100 square feet or less don't need one. What else to know:

  • Fee: the city's fee schedule lists re-roofing at $100 per structure for a single-family home, so a detached garage or shop is its own line.
  • No plans needed. Irving's residential permit page lists reroofing among the permits that don't require plans. Applications go through the city's MGO portal.
  • The final has an attic part. Inspectors check that vent piping goes through the roof, appliance vents have proper clearance and are connected, the roof is complete and to code, and the debris is gone. On a metal roof that means every pipe boot and flue collar is set right before we call for the final. Homeowners may waive the interior part with a notarized form the city provides.
  • Don't pull the permit for your contractor. The city's Building Inspections FAQ warns that whoever signs the permit is responsible for code compliance. We register, pull the permit in our name, and the permit is displayed on site.

Hail near Irving

NOAA's Storm Events Database lists 15 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Irving from 2016 through the September 2026 update. The largest was 3-inch hail near Coppell on June 6, 2018, about 7 miles from Irving, and on May 27, 2024 hail up to 2.75 inches was reported near Bedford and Euless, just west across the county line. NOAA also lists 9 tornado reports within about 10 miles, the strongest an EF3 on October 20, 2019.

Metal isn't hail-proof. Very large hail can dent steel, and some policies treat cosmetic dents differently from leaks, so read the policy before you choose. A 24- or 26-gauge panel won't crack, curl or shed granules the way shingles do. See Class 4 metal roofs and insurance. Texas insurers must offer a premium credit for UL 2218 impact-rated roofs, but each company sets its own amount, and Class 4 earns the largest. We can't promise a discount; ask your insurer for their figure in writing. After a qualifying install we fill out TDI Form PC068 for you. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.

Why it matters that we form our own panels

  • One piece from eave to ridge. We cut standing seam and R-panel to the length of each roof plane, so long runs don't need mid-slope laps.
  • 24 or 26 gauge on every standing seam and R-panel roof. See 26 vs. 29 gauge.
  • No waiting in a panel shop's queue after a hailstorm, when everyone needs a roof at once. Metal lead time is typically 1 to 2 weeks.
  • Flashings bent for the panel, not caulked: walls, chimneys, valleys, skylights and pipes.
  • Every inspection comes with a free digital photo report, so you see what we see.

How a metal roof job runs with us

  1. Inspection and free digital photo report: deck, ventilation, penetrations, valleys and measurements.
  2. Written spec for each option: system, gauge, profile, color, underlayment, trim and every flashing detail.
  3. Approvals: the HOA or historic-review packet if you need one, then the permit.
  4. Tear-off and deck repair where needed, then high-temperature synthetic underlayment made for metal.
  5. Install by our own crew, with hips, ridges, eaves and penetrations detailed for the system.
  6. Final walk-through, a magnet sweep of the yard and driveway, and your warranty in writing.

Who installs residential metal roofs in Irving?

Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:

  • 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
  • Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
  • 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
  • Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
  • Our own crew, about 36 road miles (roughly 53 minutes) from Irving with our Rhome-area team.
  • Snow Roofing & Exteriors is BBB A+ rated.

Our metal work, up close

The photos on this page show our roof work up close. We never show a street or address.

We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. We give a workmanship warranty from 10 years up to lifetime, depending on the job, and the manufacturer warranty on the panel and finish, in writing. More: our Irving roofing page, commercial metal roofing in Irving, what moves the cost of standing seam, and nearby standing seam in Grapevine and metal roofing in Fort Worth.

Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.

Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.

Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.

Request a free inspection or call (817) 733-9228. Small repairs are welcome too.

Charcoal standing seam metal roof on a brick ranch home near Rhome, TX
Charcoal standing seam on a brick ranch
Dark bronze standing seam metal roof replacing shingles on a red brick ranch home near Sanger, TX
Dark standing seam replacing shingles on a brick ranch
Standing seam metal roof on a blue board-and-batten wing of a ranch estate
Standing seam on a board-and-batten wing
Close-up of a gray standing seam metal roof with matching painted vent stacks and pipe flashings
Gray standing seam with painted vent stacks and pipe flashings
Side elevation of a brick home with multiple hips in standing seam metal
Multiple hips in standing seam
Detail of a shake-to-standing-seam metal transition
Where a shake roof meets standing seam
Close view of standing seam panels at the eave of a brick ranch home
Seams running straight to the eave
Snow Roofing crew at the panel trailer beside a brick garage during a standing seam install
Our crew and panel trailer on install day

Frequently asked questions

Who does residential metal roofing in Irving?

Snow Roofing & Exteriors installs standing seam, stone-coated steel, metal shingle, R-panel and PBR roofs on Irving homes, garages and shops. It is a family roofing business that goes back 75 years, owner Blake Snow has 30 years in the business, the company has completed over $80 million in roofing projects, and it has 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. Standing seam and R-panel are formed on its own roll formers in 24 or 26 gauge. Its Rhome-area team is about 36 road miles (roughly 53 minutes) away. Call (817) 733-9228.

Do I need a permit for a metal roof in Irving?

Yes. Irving requires a building permit on all re-roofing projects, issued to a contractor registered with the City before work starts. Repairs of 100 square feet or less are exempt. The fee is $100 per structure for a single-family home, and no plans are required.

What does the Irving final inspection check?

An attic check that vent piping goes through the roof and appliance vents are connected with proper clearance, and an exterior check that the roof is complete, code-compliant and the debris is removed. Homeowners can waive the attic part with the city’s notarized form.

Is a metal roof worth it on an Irving brick ranch?

For many owners, yes: one piece per slope, no granules to lose, and a roof that usually outlasts several shingle roofs. We give you a written price for metal and for a Class 4 shingle so you can compare honestly.

Will my HOA in Valley Ranch or Las Colinas allow metal?

It depends on the HOA. Many allow stone-coated steel or metal shingles that read as shake or shingle, and some allow standing seam. We prepare the product sheet, color chip and profile drawing; approval is up to your HOA.

Has Irving had large hail?

Yes. NOAA lists 15 reports of hail 1.75 inches or larger within about 10 miles of Irving from 2016 through September 2026, the largest 3-inch hail near Coppell on June 6, 2018.

Is standing seam the only metal option?

No. We also install stone-coated steel and metal shingles or tile for a traditional look, copper accents, and R-panel, PBR or corrugated on shops, barns and covers.

What gauge metal do you install?

24 or 26 gauge steel on every standing seam and R-panel roof. We don’t install 29 gauge on homes.

Will hail dent a standing seam roof?

Very large hail can dent any metal roof. Steel doesn’t crack, curl or lose granules like shingles, so it usually keeps shedding water. Ask your insurer how your policy treats cosmetic dents.

How soon can a metal roof start?

Metal lead time is typically 1 to 2 weeks, because we form standing seam and R-panel on our own roll formers. HOA approval and the permit can add time, so we start that paperwork right after you sign.

What warranty do you give on a metal roof?

A workmanship warranty from 10 years up to lifetime, depending on the job, plus the manufacturer warranty on the panel and finish, in writing.

Get a free estimate

Tell us how to reach you. Blake or the team will call you back.

Or call (817) 733-9228