Snow Roofing & Exteriors logo Call (817) 733-9228
Arlington, TX · Standing seam metal

Standing Seam Metal Roofing in Arlington, TX

Standing seam metal roofing in Arlington, TX is a roof built for the storms on this city's record: NOAA lists an EF-2 tornado in 2020, an EF-1 in 2019 and 48 golf-ball-or-larger hail reports within about 10 miles since 2016. Standing seam gives you one panel from eave to ridge, no laps for wind-driven rain to get under, and hidden fasteners. Snow Roofing & Exteriors forms 24- or 26-gauge standing seam on our own roll formers, cut to each roof plane, and our own crew installs it. Our Rhome-area team is about 47 road miles (roughly an hour) away. Call (817) 733-9228.
  • Hidden screws and clean, straight lines
  • Formed on our own roll formers, right on the job
  • 24 or 26 gauge steel in many colors
  • Workmanship warranty from 10 years up to lifetime, depending on the job
Illustration of a modern farmhouse with a bronze standing seam metal roof

Where standing seam fits in Arlington

Arlington sits halfway between Dallas and Fort Worth in eastern Tarrant County. The Handbook of Texas says it was founded in 1876 on the Texas and Pacific Railway as a market town for the surrounding farms, with stores and settlers moving a few miles north from Johnson Station, the frontier outpost and stagecoach stop Middleton Tate Johnson started in 1846; the post office took the name Arlington, after Robert E. Lee's Virginia home, in 1877, and the town incorporated in 1884. Arlington had 7,692 residents in 1950 and an estimated 19,000 by 1953, and the General Motors plant that opened on January 6, 1954 brought an estimated 125 new families a month that spring. Census estimates now put the city at about 402,100 people, the third-largest in the Metroplex, with neighborhoods from the 1950s onward, the University of Texas at Arlington, the entertainment district, and industrial and warehouse roofs across the Great Southwest area.

  • Brick ranch homes from the 1950s onward whose owners are tired of replacing shingles after hail. Dark standing seam over brick is the conversion we're asked about most, and the low, long roof lines of a ranch show it off well.
  • Newer two-stories in HOA neighborhoods, often as accents over porches, bays and entries with a designer or Class 4 shingle main roof where the association limits full metal.
  • Churches, offices and schools with pitched or mansard roofs where the owner wants a long-lived finish and a commercial NDL warranty (we offer 10- and 20-year NDL warranties at different prices). See church roofing in Arlington.
  • Shops, carports, patio covers and boat and RV covers tied into the house or built on their own.

Comparing standing seam with stone-coated steel, R-panel or metal shingles? See metal roofing in Arlington.

Snap-lock or mechanically seamed?

Snap-lockMechanically seamed
How the seam closesPanels snap together by handA seaming tool folds the seam closed along its length
Best onMost steep-slope house roofsLow-slope porches and wings, and very long runs
Look from the streetClean, slim seamSlightly heavier seam; same concealed fasteners

More detail: snap-lock vs. mechanical lock. We use 24 or 26 gauge steel and never 29 gauge on a home (why). We don't publish prices because size, pitch, tear-off and detail work move them too much; our standing seam cost page explains what moves the number, and you get a written price for your roof.

Arlington's wind record

NOAA's event narratives show tornadoes and straight-line wind taking roofs in Arlington:

  • November 24, 2020: an EF-2 tornado (maximum winds around 115 mph) crossed Arlington from near West Mayfield Road and South Bowen Road toward East Park Row Drive, with significant roof damage along Colorado Lane, damage to businesses and warehouses near South Cooper Street, and large sections of roof ripped off two apartment buildings.
  • June 16, 2019: a brief EF-1 tornado east of Collins Street left a few homes with significant loss of roofing, straight-line winds of 60 to 70 mph removed shingles from several homes and an apartment complex southwest of AT&T Stadium, and a 69 mph gust was measured in Dalworthington Gardens.
  • March 29, 2017: roof damage at a church and sections of brick wall blown over near Ponselle Drive and Matlock Road.
  • September 8, 2023: a metal boat dock destroyed near Lake Arlington.
  • May 28, 2024: a 58 mph gust measured at Arlington Municipal Airport.

Standing seam handles that kind of wind well when it's installed to the manufacturer's tested system. What we do on every Arlington roof:

  • Clip spacing tightened at the perimeter. Uplift is highest at the eaves, rakes, hips and ridge, so that's where the clips go closer together, per the manufacturer's pattern.
  • Hemmed panel ends and cleated trim, so there's no raw edge or loose flange for wind to get under.
  • Mechanically seamed panels on low-slope sections and where the exposure calls for the extra seam strength.
  • Deck nailing checked after tear-off, because the clips can only hold as well as the wood or deck they're screwed into. On an older house, that can mean replacing some original decking, which we photograph and price per sheet in writing first.

Low slope on churches, offices and additions

Commercial buildings and older home additions often have lower pitches than the main house. Standing seam has no laps in the field, so it handles lower slopes well when the panel and seam are the right ones. On low planes we use mechanically seamed panels, so the seam is folded closed along its full length, and we check the manufacturer's minimum slope for the exact panel and seam before we quote. Where the pitch changes (a porch tying into the main roof, a parapet wall, a rooftop unit curb) we bend transition flashings and curb details on our brake. If a section is too flat for any steep-slope roof, we'll tell you and quote the right low-slope system for it.

Color, finish and the street view

Charcoal, black and dark bronze are the most requested on brick and stone, and muted grays and bronze suit churches and commercial frontage. Lighter colors run cooler in a Texas summer. We bring real panel samples, put the exact color and finish system in writing, and include the profile drawing and product sheet in your HOA packet if you have one. See metal roof colors and finishes. Approval is up to your association.

What a good standing seam job looks like up close

  • One panel from eave to ridge, formed to the length of each roof plane.
  • Clips that let the panels move with the heat, so they don't oil-can or pull fasteners.
  • Bent flashings, not caulk, at walls, chimneys, valleys, skylights and pipes.
  • High-temperature underlayment made for metal, over a deck we've checked and repaired.
  • Vent piping and flues reconnected and flashed, any decking we replace added to the permit scope, and the permit posted on the front of the house as the City asks.

City of Arlington re-roof permit

Arlington draws its permit line at 10%. The City's guide to choosing a contractor says all roofing repairs greater than 10% of the roof surface require a permit, so a full re-roof always needs one. From the City's own pages:

  • One Reroof application, online. Per the City's Reroof permit notice, commercial, single-family and two-family reroof permits are applied for on ArlingtonPermits.com, and a Building Final inspection closes the permit.
  • Registered contractors only. The contractor needs an active General Contracting, New Home Builder/Remodeler or Reroof contractor registration with the City, and you can search registrations on ArlingtonPermits.com.
  • The fee is the City's, not ours. The City's Planning and Development Services fee schedule (effective October 1, 2025, Resolution No. 25-258) lists a residential Reroof permit at $325, plus the non-refundable plan review fee the schedule sets at 35% of the permit fee. Commercial reroof permits are priced on the project's valuation. Work started without a permit carries a penalty equal to the permit fee.
  • Posted on the front of the house. The City asks homeowners to make sure the contractor posts the permit on the front of the property and gets every final inspection, with the permit placard signed, before final payment.

Not sure whether your repair is over 10%? The City's Planning and Development Services staff take that question at 817-459-6502. We measure it, register, apply, post the permit and schedule the inspections.

Hail and standing seam in Arlington

NOAA's Storm Events Database lists 48 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of the center of Arlington from 2016 through the September 2026 update, 10 of them within about three miles, and 35 reports of hail an inch or larger within those three miles. The biggest:

  • June 12, 2023: 5-inch hail in Mansfield, about eight miles south, with 4-inch and 2.75-inch stones nearby the same evening.
  • May 27, 2024: 3.25-inch hail near Dalworthington Gardens, about a mile and a half from the center of Arlington, with 2-inch hail near Johnson Station and 2.75-inch hail in Euless and Hurst the same day.
  • May 22, 2024: 2.25-inch hail about a mile and a half from the center of the city.
  • June 1, 2025: 2.5-inch hail near Tate Springs and Lindberg, three to five miles west of the center, and 2-inch hail about a mile from the center.
  • June 6, 2018 and March 17, 2016: 2.5-inch hail in Arlington, about three miles from the center.
  • April 25, 2026: 2-inch hail near Lindberg, about five miles west of the center, and 1.75-inch hail about four miles west.

After the September 2026 NOAA update, a preliminary Storm Prediction Center report put 1.75-inch hail in south Arlington on September 11, 2026.

No roof is hail-proof, and very large hail can dent steel. Standing seam doesn't crack, curl or lose granules, so it usually keeps shedding water after storms that ruin shingles. If you'd rather keep a shingle look on the main roof, we'll compare Class 4 designer shingles with full metal. See Class 4 metal roofs and insurance. Texas insurers must offer a premium credit for UL 2218 impact-rated roofs, but each company sets its own amount, and Class 4 earns the largest. We can't promise a discount; ask your insurer for their figure in writing. After a qualifying install we fill out TDI Form PC068 for you. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.

Why it matters that we form our own panels

  • One piece from eave to ridge. We cut standing seam and R-panel to the length of each roof plane, so long runs don't need mid-slope laps.
  • 24 or 26 gauge on every standing seam and R-panel roof. See 26 vs. 29 gauge.
  • No waiting in a panel shop's queue after a hailstorm, when everyone needs a roof at once. Metal lead time is typically 1 to 2 weeks.
  • Flashings bent for the panel, not caulked: walls, chimneys, valleys, skylights and pipes.
  • Every inspection comes with a free digital photo report, so you see what we see.

How a metal roof job runs with us

  1. Inspection and free digital photo report: deck, ventilation, penetrations, valleys and measurements.
  2. Written spec for each option: system, gauge, profile, color, underlayment, trim and every flashing detail.
  3. Approvals: the HOA or historic-review packet if you need one, then the permit.
  4. Tear-off and deck repair where needed, then high-temperature synthetic underlayment made for metal.
  5. Install by our own crew, with hips, ridges, eaves and penetrations detailed for the system.
  6. Final walk-through, a magnet sweep of the yard and driveway, and your warranty in writing.

Who installs standing seam roofs in Arlington?

Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:

  • 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
  • Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
  • 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
  • Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
  • Our own crew, about 47 road miles (roughly an hour) from Arlington with our Rhome-area team.
  • Snow Roofing & Exteriors is BBB A+ rated.

Our metal work, up close

The photos on this page show our roof work up close. We never show a street or address.

We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. We give a workmanship warranty from 10 years up to lifetime, depending on the job, and the manufacturer warranty on the panel and finish, in writing.

More: metal roofing in Arlington, our Arlington roofing page, storm damage in Arlington, and standing seam in nearby Fort Worth, Grapevine and Keller.

Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.

Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.

Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.

Request a free inspection or call (817) 733-9228. Small repairs are welcome too.

Red brick ranch home with a new dark standing seam metal roof, seen from the front yard
Brick ranch after a shingle-to-standing-seam conversion
Aerial view of a composite shake roof with standing seam metal sections, installed by Snow Roofing & Exteriors
Drone view: composite shake with standing seam sections
Old asphalt shingles next to new standing seam metal panels during a roof conversion
Old shingles beside new standing seam
Gray standing seam metal roof panels running up to the ridge, with painted vent stacks
Standing seam panels and painted vents to the ridge
Standing seam metal roof seen from a backyard pool and spa
Standing seam over a pool and spa
Green standing seam metal roof and trim over the porch of a log-look siding home
Green standing seam and trim over a porch
Standing seam metal roof and gable on a tan brick ranch home
Finished standing seam gable
Roofer finishing standing seam panels at a hip on a brick garage
Finishing standing seam at a garage hip

Frequently asked questions

Who installs standing seam roofs in Arlington?

Snow Roofing & Exteriors installs 24- and 26-gauge standing seam roofs, accents, carports and patio covers on homes, churches and commercial buildings in Arlington, formed on its own roll formers. It is a family roofing business that goes back 75 years, owner Blake Snow has 30 years in the business, the company has completed over $80 million in roofing projects, it is BBB A+ rated, and it has 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. Standing seam and R-panel are formed on its own roll formers in 24 or 26 gauge. Its Rhome-area team is about 47 road miles (roughly an hour) away. Call (817) 733-9228.

Do I need a permit for a standing seam roof in Arlington?

Yes. Arlington requires a permit for roofing work over 10% of the roof surface. We apply for the Reroof permit on ArlingtonPermits.com, post it on the front of the property and schedule the Building Final inspection that closes it.

How much is the Arlington reroof permit for a home?

The City's fee schedule effective October 1, 2025 lists $325 for a residential Reroof permit, plus a non-refundable plan review fee set at 35% of the permit fee. Those are City fees, not our price.

How do you keep standing seam on in tornado-prone wind?

By following the manufacturer's tested clip pattern, with tighter spacing at the eaves, rakes, hips and ridge, hemmed panel ends, cleated trim and a deck we've checked. NOAA lists an EF-2 tornado with winds around 115 mph across Arlington on November 24, 2020.

Will hail ruin a standing seam roof?

Very large hail can dent it, but steel doesn't crack, curl or lose granules, so it usually keeps shedding water. NOAA lists 3.25-inch hail about a mile and a half from the center of Arlington on May 27, 2024.

Can standing seam go on an older Arlington ranch house?

Yes. Low, long ranch roofs suit standing seam well. We tear off to the deck, replace any original decking that won't hold the clips (priced per sheet in writing first), and correct the attic ventilation before the panels go on.

Snap-lock or mechanically seamed: which do I need?

Snap-lock suits most steep house roofs. Mechanically seamed panels are better for low-slope porches and wings and very long runs. We spec the right one for each roof plane.

Will hail dent a standing seam roof?

Very large hail can dent any metal roof. Steel doesn’t crack, curl or lose granules like shingles, so it usually keeps shedding water. Ask your insurer how your policy treats cosmetic dents.

What gauge metal do you install?

24 or 26 gauge steel on every standing seam and R-panel roof. We don’t install 29 gauge on homes.

How soon can a metal roof start?

Metal lead time is typically 1 to 2 weeks, because we form standing seam and R-panel on our own roll formers. HOA approval and the permit can add time, so we start that paperwork right after you sign.

What warranty do you give on a metal roof?

A workmanship warranty from 10 years up to lifetime, depending on the job, plus the manufacturer warranty on the panel and finish, in writing.

Get a free estimate

Tell us how to reach you. Blake or the team will call you back.

Or call (817) 733-9228 snowexteriors@gmail.com