Snow Roofing & Exteriors logo Call (817) 733-9228
Plano, TX · Metal roofing

Metal Roofing in Plano, TX

Metal roofing in Plano, TX makes sense in a city with 82 reports of golf-ball-size or larger hail within about 10 miles since 2016. Snow Roofing & Exteriors installs every kind of metal roof here: standing seam, stone-coated steel and metal shingles made for HOA review, copper accents, and R-panel or PBR for garages, workshops and outbuildings, all in 24 or 26 gauge with standing seam and R-panel formed on our own roll formers. Our Rhome-area team is about 48 road miles (roughly 72 minutes) away. Call (817) 733-9228.
  • Hidden screws and clean, straight lines
  • Formed on our own roll formers, right on the job
  • 24 or 26 gauge steel in many colors
  • Workmanship warranty from 10 years up to lifetime, depending on the job
Illustration of a modern farmhouse with a bronze standing seam metal roof

From farm town to 293,000 people

Plano is on U.S. 75 about 15 miles north of Dallas in southwestern Collin County, with a corner in Denton County. Peters Colony families moved in in 1845, the town took its name (Spanish for "flat") when the post office opened in 1852, and it was platted and incorporated in 1873. It stayed a farm town of about 3,700 people as late as 1960. Then the Dallas boom arrived: 17,872 residents in 1970, more than 72,000 in 1980, about 128,000 in 1990 and 222,000 by 2000, according to the Handbook of Texas. Census estimates show about 293,000 residents today.

That growth came in waves, and you can read it in the roofs. The 1970s and 1980s neighborhoods are on their third or fourth roof; the 1990s neighborhoods have bigger, more complex two-story roofs; and the newest homes have designer shingles and steeper pitches. Many have an HOA. Owners who are tired of hail claims ask which metal fits:

PropertyWhat we usually recommend
1970s-80s brick homeStone-coated steel or metal shingles that read as shingle from the curb, or a full standing seam roof
1990s two-story with an active HOAStone-coated steel or metal shingle in an approved color; standing seam on porches, bays and entries
Larger home with a slate or tile lookMetal slate or tile profiles, or a synthetic or tile roof if metal isn't the right fit
Modern or farmhouse-style remodelA full standing seam roof, usually charcoal, black or dark bronze
Detached garage, workshop or pool cabanaR-panel or PBR, or standing seam to match the house

Every kind of metal roof, not just one

Most "metal roofing" searches in Plano start with standing seam, but it isn't the only right answer. Here's what we install and where each one fits:

Metal systemWhat it looks likeWhere it fits best
Standing seamFlat pans with raised seams, fasteners hiddenFull roofs on modern, farmhouse and transitional homes; porch and bay accents
Stone-coated steelSteel with a stone granule finish shaped like shake, tile or shingleOwners who want metal's strength but a traditional look a neighborhood is used to
Metal shingles and metal tilePressed steel panels in shingle, slate or tile profilesHomes where the street view has to read as shingle, slate or tile
Copper accentsBright copper that weathers to brown, then greenBay windows, entry roofs, dormers and cupolas on traditional homes
R-panel, PBR and corrugatedRibbed panels with exposed screws and washersShops, barns, garages, pool cabanas, boat and RV covers

We don't quote prices on the web because pitch, size, tear-off and detail work move them too much. We'll give you a written number for each option that makes sense on your roof.

What Plano asks of a metal roof

Plano's re-roof requirements single out metal. A metal panel or metal shingle roof needs a non-combustible underlayment, and the City inspects that underlayment at a partial final before the panels cover it, then comes back for the final. In practice that means:

  • We specify an underlayment that meets the City's requirement and the panel manufacturer's, and list it by name in your written spec.
  • We schedule the underlayment inspection into the job so the crew isn't waiting with panels on the ground.
  • We reconnect and flash the plumbing vents and the water heater and furnace flues, which the final checks from the attic.

Plano's handout requires tear-off for shake, slate and tile roofs, not for every shingle roof, but on every metal job we tear off to the deck anyway, so we can fix soft decking, correct ventilation and give the panel a flat, solid base.

Plano's wind record

Hail gets the headlines in Plano, but wind has done its share. From NOAA's narratives:

  • March 4, 2025: roof damage at Plano West Senior High, a 76 mph gust reported north of Plano, and, about three miles from the center of the city, a home along Hedgcoxe Road that lost much of its roof.
  • May 28, 2024: trees and light poles down at Legacy and Independence, two homes damaged by falling trees near Parker and Independence, and next door in Richardson a measured 83 mph gust with a National Weather Service survey finding winds up to 90 mph.
  • October 20, 2019: a tornado in west Allen, about five miles away, pulled shingles off a number of homes.
  • March 21, 2022: wind damaged shingles in Bristol Point Estates, under two miles from the center of Plano.

Metal fails at its edges and fasteners, not in the middle of the panel. On a Plano roof we use:

  • Tighter clip and fastener spacing at the perimeter (eaves, rakes, hips and ridge), where uplift is highest, following the manufacturer's tested pattern.
  • Trim made for the panel, hemmed and cleated, instead of face-screwed loose trim that wind can catch.
  • Deck and nailing checked after tear-off, because a metal roof is only as well attached as the wood under it.
  • Closures sized to the panel at the ridge and eaves so wind-driven rain stays out.

Hail around Plano

NOAA's Storm Events Database lists 82 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of the center of Plano from 2016 through the September 2026 update, more than almost any town we serve, and 25 reports of hail an inch or larger within about three miles. The big ones:

  • March 24, 2019: 4.5-inch hail near Allen, about seven miles north-northeast, with 3-inch hail in the same storm and 1.75-inch hail in south Plano.
  • April 20, 2023: 3-inch hail in Plano, about a mile and a half from the center of the city, with 1.75-inch hail about two miles east.
  • April 11, 2016: 2.5-inch hail in Plano, under three miles from the center.
  • April 6, 2018: three separate reports of 2-inch hail in Plano, the closest about a mile and a half from the center.
  • March 25, 2025: 2.25-inch hail near Parker, about eight miles east, and 2-inch hail near Forest Grove.
  • June 2, 2026: 2-inch hail about eight and a half miles northwest, the most recent golf-ball-size report.

Metal isn't hail-proof. Very large hail can dent steel, and some policies treat cosmetic dents differently from leaks, so read the policy before you choose. A 24- or 26-gauge panel won't crack, curl or shed granules the way shingles do. See Class 4 metal roofs and insurance. Texas insurers must offer a premium credit for UL 2218 impact-rated roofs, but each company sets its own amount, and Class 4 earns the largest. We can't promise a discount; ask your insurer for their figure in writing. After a qualifying install we fill out TDI Form PC068 for you. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.

City of Plano re-roof permit

Plano requires a permit for a residential re-roof. The City's Building Inspections fee schedule (effective January 2, 2026) lists RE-ROOF RESIDENTIAL at $75 (a City fee, not our price), and the City's code requires the contractor pulling it to be registered with the City; homeowners working on their own residence are the exception. From the City's re-roof residential permit requirements:

  • Metal needs a non-combustible underlayment. The handout requires it under metal panel, metal shingle, and concrete and clay tile roofs.
  • Two inspections on metal and tile. A partial final checks the underlayment on metal panel, metal shingle and tile roofs before the covering hides it, then a final inspection checks the installed roof.
  • The final includes the attic, to verify vent piping through the roof, rafters in position, and the water heater and A/C or furnace exhaust vents reinstalled properly. A homeowner can instead certify that the roofing contractor performed that final check.
  • Some old coverings must come off. Wood shake, slate, clay, cement and asbestos-cement tile have to be removed before a new roof goes on; rotten decking or rafters are replaced; no unpackaged "seconds."
  • Small repairs: re-roof work not exceeding 25% of the roof doesn't need a permit.
  • HOA rules are separate. The handout tells owners to check their HOA's deed restrictions and covenants too.

Questions about a specific address go to Plano Building Inspections at 972-941-7140. We register, file, schedule both inspections and give you the paperwork.

Getting metal past an HOA in Plano

Many neighborhoods in Plano have an HOA, and committees mostly care about how the roof reads from the street and whether the color fits the neighborhood. Stone-coated steel and metal shingles read as shake, shingle or tile from the curb; standing seam is often approved first on porches, bays and entries. We put together the product sheet, color chip, profile drawing and impact rating so the committee can decide on the first pass. Approval is always up to your HOA.

Garages, cabanas and outbuildings

We re-panel and re-roof detached garages, workshops and pool cabanas in R-panel, PBR or standing seam, color-matched to the house. Our crews also handle siding, gutters and windows, so one crew can finish the whole exterior.

Why it matters that we form our own panels

  • One piece from eave to ridge. We cut standing seam and R-panel to the length of each roof plane, so long runs don't need mid-slope laps.
  • 24 or 26 gauge on every standing seam and R-panel roof. See 26 vs. 29 gauge.
  • No waiting in a panel shop's queue after a hailstorm, when everyone needs a roof at once. Metal lead time is typically 1 to 2 weeks.
  • Flashings bent for the panel, not caulked: walls, chimneys, valleys, skylights and pipes.
  • Every inspection comes with a free digital photo report, so you see what we see.

How a metal roof job runs with us

  1. Inspection and free digital photo report: deck, ventilation, penetrations, valleys and measurements.
  2. Written spec for each option: system, gauge, profile, color, underlayment, trim and every flashing detail.
  3. Approvals: the HOA or historic-review packet if you need one, then the permit.
  4. Tear-off and deck repair where needed, then high-temperature synthetic underlayment made for metal.
  5. Install by our own crew, with hips, ridges, eaves and penetrations detailed for the system.
  6. Final walk-through, a magnet sweep of the yard and driveway, and your warranty in writing.

Who installs metal roofs in Plano?

Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:

  • 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
  • Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
  • 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
  • Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
  • Our own crew, about 48 road miles (roughly 72 minutes) from Plano with our Rhome-area team.
  • Snow Roofing & Exteriors is BBB A+ rated.

Our metal work, up close

The photos on this page show our roof work up close. We never show a street or address.

We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. We give a workmanship warranty from 10 years up to lifetime, depending on the job, and the manufacturer warranty on the panel and finish, in writing.

More in Plano: metal roofing in Plano, standing seam in Plano, storm damage in Plano and our Plano roofing page. Nearby: metal roofing in Frisco, The Colony, Carrollton and storm damage in Frisco.

Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.

Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.

Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.

Request a free inspection or call (817) 733-9228. Small repairs are welcome too.

Charcoal standing seam metal roof on a brick ranch home near Rhome, TX
Charcoal standing seam on a brick ranch
Dark bronze standing seam metal roof replacing shingles on a red brick ranch home near Sanger, TX
Dark standing seam replacing shingles on a brick ranch
Standing seam metal roof on a blue board-and-batten wing of a ranch estate
Standing seam on a board-and-batten wing
Close-up of a gray standing seam metal roof with matching painted vent stacks and pipe flashings
Gray standing seam with painted vent stacks and pipe flashings
Side elevation of a brick home with multiple hips in standing seam metal
Multiple hips in standing seam
Detail of a shake-to-standing-seam metal transition
Where a shake roof meets standing seam
Close view of standing seam panels at the eave of a brick ranch home
Seams running straight to the eave
Snow Roofing crew at the panel trailer beside a brick garage during a standing seam install
Our crew and panel trailer on install day

Frequently asked questions

Who installs metal roofs in Plano?

Snow Roofing & Exteriors installs standing seam, stone-coated steel, metal shingle, copper accent, R-panel and PBR roofs on homes, garages, workshops and cabanas in Plano. It is a family roofing business that goes back 75 years, owner Blake Snow has 30 years in the business, the company has completed over $80 million in roofing projects, it is BBB A+ rated, and it has 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. Standing seam and R-panel are formed on its own roll formers in 24 or 26 gauge. Its Rhome-area team is about 48 road miles (roughly 72 minutes) away. Call (817) 733-9228.

Do I need a permit for a metal roof in Plano?

Yes. Plano's fee schedule (effective January 2, 2026) lists a residential re-roof permit at $75, pulled by a contractor registered with the City. Only re-roof work not exceeding 25% of the roof is exempt.

What underlayment does Plano require under metal?

The City's re-roof requirements call for a non-combustible underlayment under metal panel and metal shingle roofs, and the City inspects it at a partial final before the panels go on. We name the underlayment in your written spec and schedule that inspection.

How many inspections does a metal roof get in Plano?

Two: a partial final to check the underlayment on metal panel and metal shingle roofs, and a final that includes an attic check of vent piping, rafters and the water heater and furnace exhaust vents.

Has Plano had big hail?

Yes. NOAA lists 82 reports of hail 1.75 inches or larger within about 10 miles of the center of Plano from 2016 through September 2026, including 3-inch hail about a mile and a half from the center on April 20, 2023 and 4.5-inch hail near Allen on March 24, 2019.

Will my HOA allow a metal roof?

Many allow stone-coated steel or metal shingles that read as shingle from the street, and many approve standing seam accents. Plano's own handout reminds owners to check HOA deed restrictions. We prepare the product sheet, color chip and profile drawing. Approval is up to your HOA.

Can a metal roof go over my shingles in Plano?

We tear off to the deck on every metal job. It lets us fix decking and ventilation and gives the panels and the City's underlayment inspection a clean, solid base.

Is standing seam the only metal option?

No. We also install stone-coated steel and metal shingles or tile for a traditional look, copper accents, and R-panel, PBR or corrugated on shops, barns and covers.

What gauge metal do you install?

24 or 26 gauge steel on every standing seam and R-panel roof. We don’t install 29 gauge on homes.

How soon can a metal roof start?

Metal lead time is typically 1 to 2 weeks, because we form standing seam and R-panel on our own roll formers. HOA approval and the permit can add time, so we start that paperwork right after you sign.

What warranty do you give on a metal roof?

A workmanship warranty from 10 years up to lifetime, depending on the job, plus the manufacturer warranty on the panel and finish, in writing.

Get a free estimate

Tell us how to reach you. Blake or the team will call you back.

Or call (817) 733-9228 snowexteriors@gmail.com