Snow Roofing & Exteriors logo Call (817) 733-9228
Bridgeport, TX · Standing seam

Standing Seam Metal Roofs in Bridgeport, TX

Standing seam is the premium metal roof, and it's the one we're proudest of. We form 24- or 26-gauge panels on our own standing seam machine, from the home office here in Bridgeport, and our own crew installs them. Call (817) 733-9228.
  • Hidden screws and clean, straight lines
  • Formed on our own roll formers, right on the job
  • 24 or 26 gauge steel in many colors
  • Workmanship warranty from 10 years up to lifetime, depending on the job
Illustration of a modern farmhouse with a bronze standing seam metal roof

What standing seam is

A standing seam roof is made of long steel panels that run from eave to ridge. The panels join at raised seams, and the fasteners are hidden under them. There are no exposed screws to back out, wear their washers or leak, which is the weak point of older metal roofs around Bridgeport. The result is a clean, modern line that suits a stone ranch house as well as a new lake place.

Why Bridgeport owners choose it

  • Lake homes and wind. Around Lake Bridgeport and Runaway Bay, open water means wind. Concealed clips and long panels give wind less to grab.
  • Hail history. 2.75-inch hail hit near the Bridgeport airport on May 17, 2025 and again on April 25, 2026 (NOAA). Steel doesn't crack or shed granules. Very large hail can dent it, and we'll be straight about that.
  • Looks and resale. On large custom homes and estates, standing seam is often the finish that matches the rest of the build.
  • Less upkeep. No exposed fasteners means no re-screwing schedule.

Our standing seam spec

ItemWhat we do
Gauge24- or 26-gauge steel, every job
PanelsFormed in-house to the length of each roof plane
FastenersConcealed under the seam
UnderlaymentHigh-temperature synthetic underlayment
TrimRidge, hip, valley, eave and gable trim made to match
WarrantyWorkmanship from 10 years up to lifetime (depending on the job), plus the manufacturer finish warranty

Related: snap-lock vs. mechanical-lock seams, 26 vs. 29 gauge, and colors and finishes.

Details that separate a good standing seam roof from a great one

Most standing seam problems come from the details, not the panel. We pay the most attention to:

  • Penetrations. Vent stacks and pipes flashed and painted to match, so the roof stays clean (see the gallery photos).
  • Valleys and hips. Panels cut and hemmed to the line, never caulked to fill a gap.
  • Expansion. Long panels move with the Texas heat. Clips let them move without stressing fasteners.
  • Transitions. Where standing seam meets shingle, shake or a wall, the flashing is built in, not bolted on.

Full roofs and accents

Some owners do the whole house in standing seam. Others use it as an accent over a porch, bay window or entry, paired with a designer or Class 4 shingle roof. Both work. See standing seam accents and standing seam in North Texas.

Converting from shingles

Most of our Bridgeport standing seam jobs replace an old shingle roof. We inspect the deck, replace any bad decking, dry it in, and install. Every inspection comes with a free digital photo report, so you see what we see. We answer storm and leak calls 24/7, so call (817) 733-9228 any time.

Also see: all metal roofing in Bridgeport, our Bridgeport office, standing seam in Decatur, and Wise County metal roofing.

Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.

Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.

Request a free inspection or call (817) 733-9228. Small repairs are welcome too.

Close-up of a gray standing seam metal roof with matching painted vent stacks and pipe flashings
Painted vent stacks and pipe flashings on a standing seam roof
Gray standing seam metal roof panels running up to the ridge, with painted vent stacks
Panels run in one piece to the ridge
Old asphalt shingles next to new standing seam metal panels during a roof conversion
Shingle-to-standing-seam conversion in progress

Frequently asked questions

Who installs standing seam roofs in Bridgeport, TX?

Snow Roofing & Exteriors. We form 24- or 26-gauge standing seam panels on our own standing seam machine at our Bridgeport home office, and our own crew installs them. Call (817) 733-9228.

Is standing seam good for lake homes on Lake Bridgeport?

Yes. Long panels with concealed clips hold up well to wind off the water, and there are no exposed screws to back out.

What is the difference between standing seam and R-panel?

Standing seam hides its fasteners under raised seams. R-panel and PBR use exposed screws with washers. Standing seam costs more and needs less upkeep. R-panel is a strong choice for shops and barns.

Can standing seam be used just on a porch or entry?

Yes. Standing seam accents over porches, bays and entries are common, paired with a shingle main roof.

What warranty do you give on standing seam?

A workmanship warranty from 10 years up to lifetime, depending on the job, plus the manufacturer warranty on the panel finish, in writing.

Get a free estimate

Tell us how to reach you. Blake or the team will call you back.

Or call (817) 733-9228