Snow Roofing & Exteriors logo Call (817) 733-9228
Bridgeport, TX · Metal roofing

Metal Roofing in Bridgeport, TX

Bridgeport is our home office, and metal is the roof we build most of here. We form our standing seam panels on our own roll formers and standing seam machine, right on the jobsite, and our own crew installs them. We install standing seam and R-panel in 24 or 26 gauge steel. Owner Blake Snow has 30 years on roofs in a family roofing business that goes back 75 years. Call (817) 733-9228.
  • Hidden screws and clean, straight lines
  • Formed on our own roll formers, right on the job
  • 24 or 26 gauge steel in many colors
  • Workmanship warranty from 10 years up to lifetime, depending on the job
Illustration of a modern farmhouse with a bronze standing seam metal roof

Why metal fits Bridgeport

Bridgeport roofs take a beating. NOAA recorded 2.75-inch hail at the Bridgeport airport on May 17, 2025, and hail that size around the airport and Runaway Bay again on April 25, 2026. Add summer heat, wind off the open pasture west of town, and the lake humidity around Lake Bridgeport, and you have a place where a roof gets tested every year.

A properly installed metal roof handles that better than most. It sheds wind-driven rain, doesn't lose granules, and a steel panel won't crack the way an old shingle does. Metal can still dent in very large hail, and we tell you that up front. What it buys you is a roof that's usually still doing its job after storms that would send a shingle roof to the dumpster.

The metal roofs we install around Bridgeport

SystemBest forFasteners
Standing seam (24 or 26 ga, formed in-house)Homes, ranch houses, lake places, high-end custom buildsHidden under the seam
R-panel / PBR (24 or 26 ga)Shops, barns, barndominiums, some ranch homesExposed screws with washers
Stone-coated steelOwners who want a shake or tile lookDepends on the profile
Metal shingles and tileTraditional look with steel underneathConcealed, interlocking

Not sure which one? Read our standing seam vs. R-panel guide and why we install 24 or 26 gauge.

What "formed in-house" means for your job

Many metal jobs stall while a roofer waits on panels from an outside shop. We run our own roll formers and standing seam machine, so panels are cut to the exact length of each roof plane. That means fewer end laps, cleaner lines at hips and valleys, and a crew that controls the schedule. The people forming the panels and the people installing them both work for us. See why we form our own panels.

How a Bridgeport metal job runs

  1. Free inspection and digital photo report. Every inspection comes with a free digital photo report, so you see what we see. We measure, check the deck, and note ventilation and any rot.
  2. Written scope. Panel type, gauge, color, underlayment, trim, and what happens at every penetration, in writing.
  3. Tear-off or over-roof. We tell you honestly whether a metal-over-shingle install makes sense or the old roof should come off.
  4. Dry-in and install. High-temperature synthetic underlayment, then panels formed for your roof.
  5. Walk-through. We review the finished roof with you and leave the site clean, magnet-swept for screws and nails.

High-end and specialty metal

Big ranch homes, estates and lake houses are what our crews and equipment are built for. We handle long panel runs, steep pitches, standing seam accents over porches and bays, and mixed roofs where metal meets shake, slate-look or tile. See standing seam accents and our projects.

Shops, barns and barndominiums on the county roads

Outside town, a lot of our Bridgeport work is shops, horse barns and barndos in R-panel or PBR. We pay attention to condensation control, closure strips, and fastener placement, which are the details that decide whether a shop roof leaks in five years. See barndo and shop roofs.

Old metal roofs: repair, re-screw or replace

Older exposed-fastener roofs around Bridgeport often leak at the screws long before the panels wear out. Replacing worn screws and resealing flashings can buy years. When the panels are rusted through, we'll say so. See metal roof repair. We answer storm and leak calls 24/7, so call (817) 733-9228 any time.

More on Bridgeport: our Bridgeport office page, standing seam in Bridgeport, and metal roofing across Wise County. Next door: metal roofing in Decatur.

5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.

What goes into a metal roof replacement price in Bridgeport

We quote each roof after an inspection rather than posting a per-square-foot price, because these change the number:

  • Panel type: standing seam costs more than exposed-fastener R-panel or PBR.
  • Gauge: 24 or 26 gauge, chosen for the building, spans and budget.
  • Tear-off or go over: whether to remove the old roof or install over it where code and the manufacturer allow.
  • Roof shape: valleys, hips, dormers and penetrations add trim and labor.
  • Deck and framing: any rotten decking found during tear-off.
  • Underlayment and condensation control, which matter a lot on shops and barndos.

Replacement, step by step

  1. Free inspection and measurements, with photos.
  2. Written quote listing panel, gauge, color, underlayment and trim.
  3. Permit: Bridgeport doesn't currently require a residential re-roof permit, so there's no permit wait before we start.
  4. HOA approval: if you have an HOA, we handle it start to finish, including the color and product submittals and the approval paperwork.
  5. Panels formed full length on our own roll formers.
  6. Tear-off or prep, underlayment, panels, trim and flashing by our own crew.
  7. Clean-up and a final walkthrough, plus a roof certification once the roof is complete.

Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.

Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.

Request a free inspection or call (817) 733-9228. Small repairs are welcome too.

Gray standing seam metal roof panels running up to the ridge, with painted vent stacks
24- or 26-gauge standing seam run to the ridge, with painted vent stacks
Green standing seam metal roof on a log-look siding home with a stone base and covered porch
Green standing seam metal roof we installed on a log-look home, Wise County south of Bridgeport
Green standing seam metal roof and trim over the porch of a log-look siding home
Standing seam over the porch, same job south of Bridgeport

Frequently asked questions

Who installs metal roofs in Bridgeport, TX?

Snow Roofing & Exteriors, from our home office in Bridgeport. We form 24- or 26-gauge standing seam panels in-house on our own roll formers and standing seam machine, and our own crew installs them. Call (817) 733-9228.

What gauge metal do you install in Bridgeport?

We install standing seam and R-panel in 24 or 26 gauge steel. We do not offer a thinner panel to win a bid.

Is a metal roof hail-proof?

No roof is hail-proof. Steel panels do not crack or lose granules, but very large hail can dent metal. Ask your insurer how they treat cosmetic dents before you choose.

Can you put a metal roof over my old shingles?

Sometimes. It depends on the deck, the number of existing layers and local rules. We inspect first and tell you honestly whether a tear-off is the better call.

What warranty comes with a metal roof?

A workmanship warranty from 10 years up to lifetime, depending on the job, plus the manufacturer warranty for the product, which depends on the brand and the project qualifying. We put the exact terms in writing.

Do you do metal roof repairs in Bridgeport?

Yes. Re-screws, flashing repairs and leak fixes on older metal roofs, and we answer leak calls 24/7.

Can a metal roof go over my old shingles?

Sometimes, where code and the manufacturer allow. We check the deck and the existing layers first and tell you whether tear-off is the better choice.

Should I choose 24 or 26 gauge?

We install both. 24 gauge is thicker and stiffer; 26 gauge suits many homes and shops. We recommend one based on your building, spans and budget.

Do you replace old R-panel shop and barn roofs?

Yes, including ones we did not install. We can re-screw, coat, re-roof over, or tear off and install new full-length panels.

How long does a metal roof replacement take?

Most residential roofs are installed in one day, depending on size and weather. We give you a schedule with your written quote.

Do you give a roof certification on a new metal roof?

Yes. We fill out a roof certification once the roof is complete.

Do I need a permit to replace my roof in Bridgeport?

Bridgeport doesn't currently require a residential re-roof permit. If that changes, we'll handle it before work starts.

Do you handle HOA approval?

Yes, start to finish. We prepare the color and product submittals and the approval paperwork for your HOA.

Get a free estimate

Tell us how to reach you. Blake or the team will call you back.

Or call (817) 733-9228