Standing seam on Fort Worth's best-known streets
Fort Worth's upscale neighborhoods were built in very different eras, and standing seam plays a different role in each:
| Neighborhood | What's there | How standing seam usually fits |
|---|---|---|
| River Crest (west Fort Worth) | Built around River Crest Country Club, which opened May 6, 1911 as the first club in Texas with a residential development on its land. Two-story Prairie-style, stucco Mediterranean and Tudor Revival homes, many from the 1910s through the 1930s, plus newer rebuilds. | Accent roofs over porches, bays and rear additions, tied into tile, slate or designer shingles; full roofs on contemporary rebuilds |
| Tanglewood (southwest, along the Trinity) | Carved from the old Edwards Ranch by the Cassco Land Company starting in 1955, with homes from that era and many later remodels and rebuilds. | Full roofs when a postwar house is updated to a modern or farmhouse look; low-slope porches and additions |
| Mira Vista (southwest) | A private, gated golf community on former Rall Ranch land; its country club and Tom Weiskopf / Jay Morrish course opened August 22, 1987. | Accents and full roofs on custom homes, subject to the community's own architectural review |
| New custom homes across the city | Modern, transitional and modern-farmhouse builds | Often the whole roof, in a dark or matte finish |
Whatever the neighborhood, any HOA or architectural committee approval comes first. We prepare the product sheet, color chip, seam profile and a drawing of the details for the submittal.
Snap-lock or mechanically seamed?
| Snap-lock | Mechanically seamed | |
|---|---|---|
| How the seam closes | Panels snap together by hand | A seaming tool folds the seam closed along its length |
| Best on | Most steep-slope house roofs | Low-slope wings and porches, and very long runs |
| Look from the street | Clean, slim seam | Slightly heavier seam; same concealed fasteners |
More detail: snap-lock vs. mechanical lock. We use 24 or 26 gauge steel and never 29 gauge on a home (why). Price depends on size, pitch, complexity and gauge; our standing seam cost page explains what moves the number.
Where standing seam meets tile, slate and brick
On River Crest and Monticello houses the main roof is often clay tile or slate, and the hard part of a standing seam accent is the transition. Tile and slate pieces have to come off and go back without breaking, with step flashing and counter-flashing under them, and the metal has to turn up the wall behind brick or stucco with a counter-flashing that sheds water instead of relying on caulk. That's why we do the tile, slate and metal work ourselves rather than splitting the job. See tile roofing in Fort Worth and slate roofing in Fort Worth.
Historic districts: approval comes before the permit
Fort Worth's historic preservation program requires a Certificate of Appropriateness before permits or construction for exterior changes, including roofing, to historic properties and buildings in local historic districts. District guidelines can be specific. Fairmount's, for example, say original tile and slate roofs must be maintained, allow standing seam only on secondary slopes under 4/12 and on accessory buildings, and prohibit R-panel and rib panels on houses. If your house is in a district or individually designated, we check its guidelines first and put together the photos, material samples and drawings the review asks for.
City of Fort Worth permits for a re-roof
The City of Fort Worth's residential permitting page says replacing decking, lathing boards, sheathing boards, rafters or ridge boards requires a building permit (the city calls it a Residential Remodel Reroof permit). Shingle-only work doesn't need a permit, but the city limits how many shingle layers a roof can carry. Permits are filed online, and the applicant has to be a registered building contractor (or a homeowner who qualifies for a homestead permit). The city's roofing FAQ adds a few rules we build to on every Fort Worth re-roof:
- The city enforces the 2021 International Residential Code; Chapter 9 covers roof assemblies.
- Drip edge and crickets are required when re-roofing, even if the old roof didn't have them.
- New decking can't be laid over an existing layer of decking.
- Underlayment has to meet the manufacturer's instructions or the code, whichever is stricter.
Going to metal, slate or tile often means deck repairs or framing checks, so we confirm the scope with the city and pull the permit whenever it's required. Changing the roof pitch needs construction plans and elevation drawings.
Hail near Fort Worth
NOAA's Storm Events Database lists 45 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of the center of Fort Worth from 2016 through the September 2026 update. The largest were 3-inch hail near Mara on March 16, 2023, about three and a half miles from the center, and 3-inch hail near the Carswell air base on October 10, 2019. The most recent big day was April 25, 2026, with 2.75-inch hail near Hodge in north Fort Worth, 2.5-inch hail near Westland and 2.25-inch hail near Benbrook. Countywide, NOAA lists 115 reports of golf-ball-size or larger hail in Tarrant County over the same period, the largest 5-inch hail near Mansfield on June 12, 2023. Hail counts change across a city this big. Using the same 10-mile radius, NOAA's list has 36 reports around River Crest, 38 around Tanglewood and 33 around Mira Vista.
Standing seam usually keeps shedding water after hail that would end a shingle roof, but very large hail can dent it, and we say so before you sign. Texas insurers must offer a premium credit for UL 2218 impact-rated roofs, but each company sets its own amount, and Class 4 earns the largest. We can't promise a discount; ask your insurer for their figure in writing. After a qualifying install we fill out TDI Form PC068 for you. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.
Why it matters that we form our own panels
- One piece from eave to ridge. We cut standing seam and R-panel to the length of each roof plane, so long runs don't need mid-slope laps.
- 24 or 26 gauge on every standing seam and R-panel roof. See 26 vs. 29 gauge.
- No waiting in a panel shop's queue after a hailstorm, when everyone needs a roof at once. Metal lead time is typically 1 to 2 weeks.
- Flashings bent for the panel, not caulked: walls, chimneys, valleys, skylights and pipes.
- Every inspection comes with a free digital photo report, so you see what we see.
Who installs standing seam roofs in Fort Worth?
Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:
- 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
- Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
- 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
- Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
- Our own crew, about 32 road miles (roughly 41 minutes) from Fort Worth at our Rhome office.
- Snow Roofing & Exteriors is BBB A+ rated.
Our metal work, up close
The photos on this page are real Snow Roofing & Exteriors jobs. Each caption names the area where the job is. They're from Wise, Denton and Clay counties, not from this town, and we never show a street or address.
We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. We give a workmanship warranty from 10 years up to lifetime, depending on the job, and the manufacturer warranty on the panel and finish, in writing. More: all metal roofing in Fort Worth (stone-coated steel, metal shingles, copper and shop metal), standing seam in Westover Hills, commercial roofing in Fort Worth and our Fort Worth roofing page.
Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.
Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.
