Outdoor kitchens in Colleyville
Colleyville incorporated in 1956 on State Highway 26 in northeastern Tarrant County and grew from 12,724 residents in 1990 to about 25,727 today (Census estimate). TSHA notes that in the early 1980s residents debated holding the city to large-lot single-family homes, and the city still feels that way: big lots with mature trees, brick and stone houses, and a lot of backyard pools. Many of those houses are from the 1980s and 1990s, so an outdoor kitchen here is often an upgrade to an older patio, and the cover has to tie into a roof that may already be on its second or third replacement.
Who builds outdoor kitchens in Colleyville?
Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:
- 75 years as a family roofing and exterior business, and 30 years in the trade for owner Blake Snow.
- 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
- Snow Roofing & Exteriors is BBB A+ rated, fully insured, with references available on request.
- Our own crews, who frame, roof, side, trim and finish outdoor kitchens and covers from start to finish.
- One company for the whole outside of the house: roofs, gutters, siding, windows, soffit and fascia, paint, and outdoor living.
- A workmanship warranty from 10 years up to lifetime, depending on the job, in writing.
Four ways to put a roof over an outdoor kitchen
Most Colleyville outdoor kitchens end up as one of these. Which one fits depends on the back of the house, where the sun sets, how close the pool or the fence line is, and what the city allows on your lot.
| Layout | Good for | What to watch |
|---|---|---|
| Attached cover, tied into the house roof | Short walk from the kitchen door, one continuous roofline | The tie-in is the most common leak spot on any patio roof, and attaching can change how the city treats the structure |
| Freestanding pavilion | Putting the grill where the view, the pool or the shade is best | Footings, wind bracing and setbacks from the property lines |
| Cover over an existing island | Owners who already have counters and a grill out in the sun | Whether the island can stay where it is, and how smoke will clear |
| Kitchen built into a pool house | Big backyards, entertaining, a bath and storage under one roof | Plumbing to the sewer, pool setbacks and, for enclosed buildings, wall material rules |
We plan the cover and the kitchen together, so the posts land where the counters need them, the vent hood has a clear path, and the roof drains away from the cooking area and the pool deck.
City of Colleyville permits for outdoor kitchens and covers
In Colleyville, a new patio cover or pavilion is its own building permit. If you're building a pool at the same time, the city's pool guidelines let some pieces ride on the pool permit: grills, fire pits, fireplaces, outdoor showers and outdoor kitchens with a grill and/or bar sink, plus detached structures of 120 square feet or less. A legally existing covered patio can get a grill or outdoor kitchen under a pool permit too. But an attached patio cover, or a detached cover over 120 square feet, needs a separate building permit.
Colleyville's 2025 addition, alteration and accessory structure guidelines spell out the package:
- Every contractor registers with the city and files through its online CSS portal. Each structure gets its own permit, with its own plan review. The city's goal is seven working days once everything is in.
- A plot plan on your survey, showing setbacks to every property line, the distance to the house and to any existing accessory buildings, and the underground electric, plumbing or gas lines that serve the new structure.
- Floor plan, elevations, a framing plan with spans, a roof plan and wall bracing.
- A foundation, footing or pier plan. Over 500 square feet it has to be engineered, with a soils report. Under 500 square feet it can follow the code minimum or the city's own specs.
- A drainage plan and the city's impervious coverage worksheet, which adds up every roof, covered patio, accessory structure, pool, deck, drive and walk and compares it with your zoning district's maximum.
- A form survey when the structure sits within 2 feet of a building line, uploaded at least 24 hours before the foundation inspection.
Colleyville dropped its residential fire sprinkler requirement on June 6, 2023, so a larger pool house no longer triggers one. Deed restrictions and HOA rules are a private agreement the city doesn't enforce, but we get your HOA's approval anyway before we build. The district setbacks for accessory buildings come from the city's Land Development Code; we confirm the ones for your lot with the city before design is final.
Fire pits, fireplaces and the impervious math
- The city's pool guidelines keep a wood-burning fire pit at least 25 feet from buildings and combustible materials. A gas fire pit needs 5 feet from buildings, combustibles and property lines. Neither can sit in an easement or hurt the lot's drainage.
- A covered outdoor kitchen adds roof area to the impervious coverage worksheet. On a lot that already has a big pool deck and a long drive, that number can decide how large the cover can be, so we run it before we draw.
Matching a Colleyville roof
Colleyville houses run from 1980s brick ranches to newer stone-and-stucco builds under tile, slate-look or designer shingles. On a shingle house, matching shingles on a cover with enough pitch is often the simplest match, and we can step up to impact-rated shingles. On tile, we match it where the cover can carry the weight, or use standing seam in a color pulled from the tile. On an older cover we're reusing, we strip it to the deck, check the framing and reflash the tie-in into the house with metal. See patio covers that match tile with standing seam.
The roof is what has to last
An outdoor kitchen cover is a real roof that happens to have no walls. It gets the same hail and wind as your house, plus heat from the grill underneath. What we put on it:
- Standing seam metal, which we form on our own roll formers in 24 or 26 gauge. It handles the low pitch most covers have, sheds oak leaves, and looks right next to brick and stone. Metal lead time is typically 1 to 2 weeks. See standing seam.
- Shingles matched to the house, including impact-rated shingles, where the cover has enough pitch.
- Tile, slate or Enviroshake tie-ins on homes with those roofs. We match the main roof when the pitch and framing allow, or pair it with standing seam in a color pulled from the house. See outdoor kitchen roofs that tie into tile or slate.
- Gutters and downspouts sized so a summer downpour doesn't sheet onto the counters or wash out a flower bed. See gutters.
Where the new roof meets the house, we flash it into the wall or under the existing roofing. That joint should never depend on caulk.
Smoke, heat, gas and power
A covered grill needs somewhere for the smoke and heat to go. We plan the ceiling height, the vent hood and the clearances to the grill maker's instructions before framing starts, and we keep combustible trim away from the heat. Gas lines, electrical circuits for lights, fans and outlets, and any sink plumbing are done by the right trade under their own permits, and we schedule that rough-in so nothing has to be torn back open later. Natural gas or propane, a built-in refrigerator, an ice maker or a pizza oven all change what goes into the plan, so we ask about appliances first.
Hail around Colleyville
NOAA's Storm Events Database lists 36 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Colleyville from 2016 through the September 2026 update. The closest big one was 2.75-inch hail in Bedford on May 27, 2024, about two miles away, the same day 2.75-inch hail fell in Euless and Hurst. Earlier, 3-inch hail fell in Keller on April 28, 2021, and the list includes 1.75-inch hail in east Fort Worth and Tarrant County as recently as March 2025.
Older covers in Colleyville are often the first thing to leak after a storm, because the tie-in to the house was flashed with caulk instead of metal. When we add a kitchen under an existing cover, we look at that joint first.
How an outdoor kitchen job runs with us
- Site visit. We look at the back of the house, the roofline, the yard and the pool, and talk about how you cook and entertain.
- Design. We can bring in an architect to spec a new build, or build to plans you already have.
- Written scope. Structure, roof material and color, gutters, appliances, finishes and every flashing detail, with no surprises later.
- Approvals. Your HOA's approval if you have one, then the permit with the City of Colleyville. We prepare the drawings and the site plan.
- Build. Our own crews build it from start to finish. The trades for gas, power and plumbing are scheduled around the framing.
- Inspections and walk-through. We call for the inspections, walk the finished kitchen with you, and give you the workmanship warranty in writing.
More for Colleyville homeowners
Planning the whole backyard? See pool houses in Colleyville and our pergolas and patio covers. For the house itself: metal roofing in Colleyville, standing seam, tile roofing, slate roofing and Enviroshake.
We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers.
Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.






