Highland Park synthetic slate roofing on older framing
Highland Park is a 2.2-square-mile residential town about four miles north of downtown Dallas, surrounded by Dallas and University Park, with about 8,764 residents (Census estimate). Its land was bought in 1889 by the Philadelphia Place Land Association for development along Turtle Creek, and many homes date from the early and middle 1900s. Many of those homes were framed for clay tile, wood shingles or asphalt, not for natural slate, which is heavy enough that the town asks for an engineer's rafter plan for slate or tile roofs on new construction and remodel plans. That is where synthetic slate earns its place: it gives a Tudor, Georgian, French or Mediterranean house the slate look without asking an old roof frame to carry stone.
| Option | Weight on the frame | Where it fits in Highland Park |
|---|---|---|
| Synthetic slate | Light, a fraction of natural slate | Older homes that want the slate look; additions that must match a slate-look main roof |
| Natural slate | Heavy; framing usually has to be checked by an engineer | Homes built for it, or owners who want stone and will reinforce |
| Slate-look designer shingle | Light | The look on a tighter budget |
Which synthetic slate, and how to choose
We install DaVinci, Brava, EcoStar and other major synthetic slate lines. Each has its own color blends, tile widths, thickness and edge detail, and the right one depends on the style of the house and the roofs around it. On a traditional Highland Park street, a multi-width blend in grays or a soft purple-gray usually reads as old slate; on a newer house, a single width in one color can look cleaner. We bring full-size samples and photos of each product installed, not a tiny chip.
The details that make a synthetic roof look real
- Color blend and pattern. Most designs mix two to four colors and several widths. We lay out samples on your roof, in your light, before anything is ordered, and we pull from several bundles at once so no color stripes across a slope.
- Hips, ridges and rakes. These are what neighbors actually see. We use the manufacturer's matching hip and ridge pieces and keep the exposure even all the way up.
- Metal where it counts. Valleys, step and counter flashing, chimney crickets and dormer cheeks are where a premium roof leaks. We bend metal for those details, with copper where it suits the house, kept away from steel and aluminum.
- Underlayment and ventilation exactly as the manufacturer requires, so the product warranty applies.
- Tight lots and alleys. Park Cities lots are close together. We plan drops, tear-off chutes and cleanup around neighbors, drives and alleys, and protect landscaping and pools.
Insurance, hail and fire ratings
Synthetic slate and shake products are built for impact, and many carry a UL 2218 Class 4 impact rating; fire ratings depend on the product and the tested assembly. We confirm the published impact and fire rating of the exact product and color before we order it. Texas insurers must offer a premium credit for UL 2218 impact-rated roofs, but each company sets its own amount, and Class 4 earns the largest. We can't promise a discount; ask your insurer for their figure in writing. After a qualifying install we fill out TDI Form PC068 for you.
Storms and trees in the Park Cities
NOAA's Storm Events Database lists 10 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Highland Park from 2016 through the September 2026 update, the largest 2.5 inches near New Hope on June 2, 2017, with 2-inch hail near Richardson on September 24, 2023. This year the Storm Prediction Center logged 1-inch hail 4 miles north-northwest of University Park on May 22, 2026. Fewer big-hail days than towns west of DFW Airport doesn't mean none, and the Park Cities' tall trees add their own wear: limbs, leaves and long shade.
Synthetic slate is far less brittle than natural slate under a falling limb or a footstep, which matters under Highland Park's mature trees. We still check valleys and gutters after storms, because leaves and seed pods packed into a valley are the most common cause of leaks we find on premium roofs. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.
Working in the Town of Highland Park
The town runs contractor registration, permits and inspections through its OpenGov portal: a registered contractor applies for the permit, pays the fees and requests inspections online, and inspection requests have to be in by 4 p.m. for the next business day. The town's builders packet also sets rules every roofer working here has to plan around:
- Construction hours are 7 a.m. to 6 p.m., Monday through Saturday, with no work on Sundays or the listed holidays (Code of Ordinances Sec. 8.01.005). We schedule tear-off days inside that window.
- Wet saws only for cutting masonry or stone (Sec. 3.02.005), which matters when a chimney cap or stone parapet is reflashed.
- Weight is a real question. On new construction and remodel plans, the town asks for a rafter plan designed by an engineer for slate or tile roofs. Synthetic roofing weighs a fraction of natural slate or clay, which is one reason it is chosen on older Highland Park framing.
The town adopted the 2024 International Codes with local amendments (Chapter 3 of its code). We register, file the permit, post it on site and call for the final, and we bring product sheets, ratings and samples for any neighborhood or deed-restriction review.
How a synthetic slate job runs with us
- Inspection and free digital photo report, including decking, ventilation, flashings and chimneys.
- Samples on your roof and a written spec: product, blend, exposure, underlayment, metals and every flashing detail.
- Approvals: any neighborhood or deed-restriction review, then the town permit through OpenGov.
- Tear-off and deck repair inside the town's work hours, with the roof dried in each day.
- Install by our own crew to the manufacturer's specifications.
- Final inspection, cleanup and your warranties in writing.
Who installs synthetic slate roofs in Highland Park?
Snow Roofing & Exteriors does. Facts you can check before you call anyone:
- 75 years as a family roofing business, and 30 years in the trade for owner Blake Snow, who has installed slate, tile, shake, copper and standing seam roofs many times over.
- We install DaVinci, Brava, EcoStar and other major synthetic slate and shake brands, and we're certified with Enviroshake, among other manufacturers.
- Over $80 million in completed roofing projects. 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. BBB A+ rated.
- Fully insured, with certificates sent before work starts and references available on request.
- Installed to manufacturer specs by our own crew, with a workmanship warranty from 10 years up to lifetime, depending on the job.
We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. More: synthetic slate roofing, synthetic shake in Highland Park, natural slate in Highland Park, tile roofing in Highland Park and our Highland Park roofing page.
Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.
Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.








