Two kinds of warehouse roof in Denton
| Building | Typical roof | What we usually do |
|---|---|---|
| Pre-engineered metal building, shop or flex space | Exposed-fastener R-panel or PBR, sometimes standing seam | Re-screw, coat, retrofit, or new one-piece panels formed to length |
| Tilt-wall or masonry distribution building | Low-slope TPO, mod bit or older built-up | Moisture survey, repair, coating, recover, or tear-off and replace |
Start with what's under the membrane
A big flat roof can look fine and hold thousands of square feet of wet insulation. We walk the roof, fly a drone for photos of areas that are hard to reach safely, and run drone thermal (infrared) scans that help show where water has gotten under the surface. We confirm with core cuts and map wet areas on a roof plan. Under the 2021 IBC reroofing rules both cities have adopted, a new roof generally can't be laid over an existing roof that is water-soaked or deteriorated, or over one that already has two or more layers. A moisture survey tells us which applies. Every inspection comes with a free digital photo report, so you see what we see.
Keeping the building running
- Work in zones that are dried in the same day
- Material drops, lifts and cranes scheduled around dock traffic and shift changes
- Protection over racking and inventory where we open the roof
- Skylights and light panels replaced or matched to the panel profile
- We send certificates of insurance before work starts; tell us your requirements with the bid request.
Metal, formed here
We form standing seam and R-panel/PBR in 24 or 26 gauge on our own roll formers, cut to the measured length of each run. Metal lead time is typically 1 to 2 weeks. On a long warehouse that means continuous panels with no end laps, which removes one of the most common leak points on metal buildings.
Denton permits
The City of Denton adopted the 2021 International Building Code for permits applied for on or after June 1, 2022 (Ordinance 22-660, with local amendments). Its commercial roofing page says a permit is required for any roof work. The submittal is a commercial application, the manufacturer's specifications for the roof system and insulation, and a roof plan showing the length of all four sides of the building. Inspections are a roof-decking inspection where it applies and a roof final, scheduled through the city's eTRAKiT system. Contractors register with the city before pulling permits. We prepare the roof plan and manufacturer specs for the submittal.
Denton hail record
| Date | Where NOAA logged it | Hail size |
|---|---|---|
| April 11, 2016 | Near Denton | 4.00 in |
| June 11, 2023 | Near Bartonville, south of Denton | 3.50 in |
| June 11, 2023 | Near Smoots | 3.00 in |
| June 15, 2023 | Near Sanger, about 10 miles north | 5.90 in |
Source: NOAA NCEI Storm Events Database. NOAA lists 40 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Denton from 2016 through September 2026. A report shows where hail was seen, not whether a given roof was damaged.
A warehouse roof is a big target. After a storm we inspect, document each section separately and give you one organized set of photos. We document the damage with photos and measurements and can be on the roof when your adjuster inspects. We don't adjust or negotiate claims; you work the claim with your insurance company. Texas law requires you to pay your deductible, and we never waive or rebate it. In Texas you generally have 1 year from the date of loss to file; check your policy.
We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. Both 10-year and 20-year manufacturer NDL (no-dollar-limit) warranties are available on commercial jobs. The price depends on which term you choose, and the manufacturer issues an NDL warranty only after its own inspection. We offer same-day response in almost every case, and we answer leak and storm calls 24/7 at (817) 733-9228.
Statewide guide: warehouse roofing.
More Denton building types: warehouses · churches · HOAs · apartments · mini storage · strip malls. Back to commercial roofing in Denton, metal roofing in Denton or roofing in Denton.
Commercial warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, plus both 10-year and 20-year NDL (no-dollar-limit) manufacturer warranties (the price depends on which NDL term you choose). Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.
