Offices in Bridgeport · Decatur · Rhome · Class 3+ impact-rated shingles on every roof Call (817) 733-9228
Snow Roofing & Exteriors logo

Free Roof Replacement Estimate

📞 Call (817) 733-9228
Rhome, TX · Warehouse roofing

Warehouse and Metal Building Roofing in Rhome, TX

Along U.S. 287 and State Highway 114, Rhome's commercial buildings are mostly metal: contractor yards and shops, small warehouses, ag and equipment buildings, and flex space serving the growth spreading north from the Alliance corridor. Our Rhome office is at 153 County Road 4713, a few minutes from most Rhome addresses, so this is close-to-home work for us. We run our own roll formers and roof metal buildings every week.

What we see on Rhome-area metal buildings

ProblemCauseFix
Leaks at hundreds of screwsWashers aged by sun and heatRe-screw with oversize fasteners; see exposed-fastener roofing
Rust at end laps and eavesWater held in lapsTreat and coat, or new one-piece panels
Dripping inside on cool morningsCondensation, not a leakInsulation and vapor control; see shops and barndos
Dents and cracked light panels after hailStorm damageDocument, then replace damaged panels and light panels
Leaks at curbs and exhaust fansFlashings not matched to the panel ribNew curbs and boots flashed to the profile

Options, cheapest to most complete

  1. Re-screw and seal when panels are sound
  2. Re-screw and coat with an acrylic or silicone system
  3. Retrofit new panels over the old roof on sub-framing, with room for insulation
  4. Tear off and re-panel in 24- or 26-gauge PBR, R-panel or standing seam

We form standing seam and R-panel/PBR in 24 or 26 gauge on our own roll formers, cut to the measured length of each run. Metal lead time is typically 1 to 2 weeks. Because the roll formers are ours, a long warehouse slope gets one panel from eave to ridge, with no end laps to rust.

Low-slope offices and additions get TPO or a coating, and we'll tell you when metal isn't the right answer for a pitch.

Inside Rhome, or county land?

Inside city limits, the City of Rhome issues building permits under the 2021 codes and uses a third-party inspector, and contractors on permitted work must meet the city's annual contractor registration requirements, including a surety bond. We're a registered contractor in Rhome and bonded. Many buildings with a Rhome mailing address sit outside city limits in unincorporated Wise County, where the city's process doesn't apply. We check which side of the line your property is on before we quote. Under the 2021 IBC reroofing rules (Section 1512), a new roof generally can't be laid over an existing roof that is water-soaked or deteriorated, or over one that already has two or more layers. A moisture survey and a core cut tell us which applies.

Hail near Rhome

DateWhat NOAA logged near Rhome
April 1, 20242-inch hail at Rhome and at Newark; 3.4-inch hail near Justin and 4.5-inch hail near Keeter, about nine miles west
April 8, 20243-inch hail at Boyd, about five miles away
November 24, 20251.75-inch hail reported in Rhome

Source: NOAA NCEI Storm Events Database. NOAA lists 20 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Rhome from 2016 through the September 2026 update. A report shows where hail was seen, not whether a given roof was damaged.

We document the damage with photos and measurements and can be on the roof when your adjuster inspects. We don't adjust or negotiate claims; you work the claim with your insurance company. Texas law requires you to pay your deductible, and we never waive or rebate it. In Texas you generally have 1 year from the date of loss to file; check your policy.

Keeping the yard working

  • Sections dried in the same day; no open roof overnight
  • Work planned around bay doors, forklifts and deliveries
  • We send certificates of insurance before work starts; tell us your requirements with the bid request.

We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. Both 10-year and 20-year manufacturer NDL (no-dollar-limit) warranties are available on commercial jobs. The price depends on which term you choose, and the manufacturer issues an NDL warranty only after its own inspection. We offer same-day response in almost every case, and we answer leak and storm calls 24/7 at (817) 733-9228.

Statewide guide: warehouse roofing. A real job nearby: standing seam near Rhome.

Rhome building types: warehouses and shops · churches · mini storage, boat and RV covers · retail centers. Overview: commercial roofing in Rhome · metal roofing in Rhome · our Rhome office.

Commercial warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, plus both 10-year and 20-year NDL (no-dollar-limit) manufacturer warranties (the price depends on which NDL term you choose). Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.

Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.

Request a free inspection or call (817) 733-9228. Small repairs are welcome too.

Frequently asked questions

Do you roof metal buildings in Rhome?

Yes. Our Rhome office is at 153 County Road 4713. We re-screw, coat, retrofit and re-panel warehouses, shops and ag buildings.

Do I need a permit to re-roof a warehouse in Rhome?

Inside city limits, the City of Rhome issues building permits under the 2021 codes. We're a registered contractor in Rhome and bonded. Many Rhome-address buildings are in unincorporated Wise County instead. We check which applies before we quote.

Is my metal building leaking, or is it condensation?

Drips on cool mornings with no rain are usually condensation. We check both, and fix condensation with insulation and vapor control.

Can you re-panel a long building without end laps?

Yes. We form 24- or 26-gauge panels on our own roll formers to the length of each run, typically with a 1 to 2 week lead time.

Should we coat or replace?

Sound panels with failing screws can be re-screwed and coated. Rusted-through or badly hail-damaged panels are better replaced or retrofitted. We price both.

Which manufacturers are you certified with?

We are certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers.

Get a free roof inspection

We get on the roof, photograph what we find, and tell you plainly whether you need a repair or a replacement.

Free Roof Replacement Estimate

📞 Call (817) 733-9228

Certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake

Atlas Roofing certified contractor
📞 (817) 733-9228