Windows in Frisco homes
Frisco sits on State Highway 289 and Farm Road 720 about 30 miles north of Dallas, mostly in Collin County with a part in Denton County, and Census estimates show about 237,000 residents. Most of its houses were built in the last 25 years, in master-planned neighborhoods such as Starwood, Stonebriar, Newman Village and Phillips Creek Ranch, almost all with an HOA. A lot of those houses still have their original builder-grade windows, and that's where most of the problems are: fogged glass from failed seals, warped sashes on the west side, and hail-cracked frames.
Those builder windows were chosen for price, not for a west-facing two-story wall in North Texas. Twenty years in, the common problems are seal failures (fog between the panes), sashes that stick or won't lock, gaps where the frame meets brick, and cracked or dented frames from hail.
Signs it's time for new windows
- Fog or moisture between the panes, which means the seal has failed
- Drafts, or rooms that never get comfortable in July or January
- Sashes that stick, won't lock or won't stay up
- Soft or rotted frames and sills, or water stains below a window
- Glass cracked or frames dented by hail
City of Frisco window permits
Frisco's residential permits page lists doors and windows among the replacements that can go through its Self Service permits, which give immediate access to select residential permits instead of a full electronic plan review. The city's February 2026 alteration submittal requirements list "Windows & Doors" on that self-service list too. A few things still apply:
- The contractor has to be registered with the City of Frisco, and registration status is checked in eTRAKiT, the same system used to schedule inspections.
- Changing a window's size, adding an opening or altering the wall around it is no longer a simple replacement. That goes through the city's additions and alterations review instead.
- The same Frisco document notes that some subdivisions require HOA approval. In Frisco that's most of them, so we submit to your HOA before ordering.
Frisco adopted the 2024 International Energy Conservation Code with local amendments, effective June 2, 2026 (Ordinance 2026-06-42), and the 2024 International Residential Code effective March 1, 2026.
Energy ratings your new windows need in Frisco
Frisco builds to the 2024 International Energy Conservation Code with local amendments. Every new window carries an NFRC label with two numbers that matter here:
- U-factor: how much heat the whole window lets through. Lower is better. The base code table for our climate zone (Zone 3) lists 0.30 or lower.
- Solar heat gain coefficient (SHGC): how much of the sun's heat comes through the glass. The same table lists 0.25 or lower, which matters on west- and south-facing glass in a Texas August.
We check every unit's label against the version Frisco actually adopted, amendments included, before anything is ordered, and the labels stay on the glass until the inspection is done. Bedroom windows also have to keep a legal emergency escape opening, and glass in doors, near tubs and showers, beside doors and at stair landings has to be tempered. That matters most when you change a window's style, say from a double-hung to a casement or a picture window.
How a window job runs with us
- Free in-home visit. We look at every window, talk through styles, grids and colors, and tell you which ones actually need replacing.
- Exact measurements of each opening, so the windows are ordered to fit.
- Permit and HOA paperwork filed while the windows are on order.
- Installation. Old units out, openings checked for rot, new windows set level and square, flashed into the wall and sealed. Most window leaks start with poor flashing, not a bad window.
- Trim, inspection and clean-up, then a walkthrough where we open, close and lock every window with you.
Windows in brick and stone walls
Most replacements in brick or stone houses go in as insert replacements: the new unit is sized to the existing opening, set inside it, and sealed and flashed at the head and sill, so the masonry stays untouched. When an old frame is rotted or a window size is changing, it becomes a full-frame replacement, which means removing the old frame down to the rough opening and flashing the new unit into the wall. We'll tell you which one each window needs and why before you sign.
Big glass, arched tops and custom shapes
Many Frisco houses were built with two-story entry windows, arched transoms, round tops and walls of glass facing the backyard. Those are the windows builders most often filled with whatever was cheapest at the time, and the ones whose seals fail first in the afternoon sun. We measure each shape exactly, order matching custom units, and talk through the glass package for the openings that take the most heat. Where a large fixed unit sits beside operable windows, we keep the sight lines and frame widths consistent so the elevation still reads as one design.
Brands, without a sales pitch
We install all major window brands, plus Snow Vinyl Windows, our own private-label vinyl window line. At the in-home visit we'll show you a few options that fit the house and the budget and explain the differences in plain English: frame material, glass package, how the sash operates, and what the warranty covers. We don't push one brand because it pays us more.
Comfort, without a made-up energy promise
Replacing leaky single-pane or failed double-pane windows with well-installed, energy-efficient units usually makes a house more comfortable and can lower heating and cooling costs. How much depends on the house, the old windows and how you live in it, so we don't promise a percentage or a utility rebate we haven't confirmed for your address.
Why a siding and roofing crew should set your windows
A window is only as dry as the flashing around it. Because we also do siding, trim and exterior paint, the house wrap, flashing tape, trim and caulk line around each window are one system installed by one crew. If siding is coming off anyway, that's the best time to replace the windows: the flashing can be done the way the manufacturer intended instead of patched in from the outside.
Hail around Frisco
NOAA's Storm Events Database lists 69 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Frisco from 2016 through the September 2026 update, the highest count of the towns on this page. The largest was 4.5-inch hail near Allen on March 24, 2019. On June 11, 2023, 3.5-inch hail fell near Carney, about two miles from Frisco, and this year the list includes 2-inch hail near Carney on June 2, 2026, about three and a half miles away.
When hail breaks glass or cracks frames, we document the windows with the roof, gutters and siding, board up broken openings, and replace what the storm damaged. If you file an insurance claim, we document the damage with photos and meet your adjuster. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file a claim; check your policy.
Photos
The photos below show trim, paint and wall work by our crews around windows. We never show a street or address.
More for Frisco homeowners
More in Frisco: metal roofing in Frisco, standing seam, tile roofing, outdoor kitchens, pool houses, commercial roofing and our Frisco roofing page. Nearby: window replacement in Little Elm.
We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers.
Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.




