Horse barns, hay barns and lake country
Sanger is on I-35 about ten miles north of Denton. The Handbook of Texas says it was founded in 1886 as a stop on the Santa Fe Railroad, named for the Sanger family, whose stores in Waco and Dallas were good customers of the line, on a site where cattle from north Denton County ranches had been driven up the old trails to northern markets. Wheat, cattle and horse farms that breed and train registered stock built the local economy, and Lake Ray Roberts is about four miles east of town. Census estimates show Sanger growing from 8,839 residents in 2020 to about 10,238 in 2025.
That makes Sanger some of the most barn-heavy country we serve. Horse barns with long stall rows, covered arenas, hay barns and equipment sheds line the roads west of I-35 and out toward Ray Roberts, along with newer shops and barndominiums. Horse barns are their own kind of roof: they hold moisture from the animals, they need light and air, and a leak over a stall or a feed room is a real problem. We plan ventilation and condensation control on every enclosed horse barn, not just the panels.
Which metal goes on which building
A barn roof isn't one product. What goes on a hay barn in Sanger isn't always what belongs on a horse barn or a shop you can see from the back porch. Here's how we match the panel to the building:
| Building | What we usually recommend | Why |
|---|---|---|
| Hay barn, equipment barn, loafing shed | R-panel or PBR, 24 or 26 gauge | Strong ribs that span open purlins, quick to install, easy to repair a panel at a time |
| Pole barn or post-frame building | R-panel or PBR, with closures and trim made for the panel | The screw pattern at the eaves, rakes and ridge is what holds it down in a storm |
| Horse barn, stable or covered arena | R-panel, PBR or standing seam, with ventilation and condensation planned | Animals add moisture to the air, and bare steel sweats over it |
| Show barn, or a barn in full view of the house | Standing seam | Hidden fasteners, clean lines and no exposed screws to re-tighten later |
| Barndominium or barn with living space | Standing seam or R-panel over a planned insulation and vapor layer | See barndominium, shop and ag roofs |
| Sheds, carports, boat and RV covers | Corrugated, R-panel or PBR | Matches older buildings and keeps small jobs simple |
We form standing seam and R-panel on our own roll formers in 24 or 26 gauge, and we also offer corrugated and PBR panels. Metal lead time is typically 1 to 2 weeks. We don't post prices, because building size, framing condition, tear-off and trim change the number a lot. You get a written price for your building.
Re-screw, re-panel or re-roof?
Most old barn roofs don't have to come off. We walk the roof where it's safe, fly a drone where it isn't, look at the purlins from inside, and show you the photos behind our call:
- Re-screw: the panels are sound, but rubber washers have cracked in the sun or screws have backed out. New fasteners, one size up where the holes have worn oval, can add years to a roof that's otherwise fine.
- Partial re-panel: some panels are rusted through, punctured by hail or bent by wind, usually along the eaves, the rakes or an old lean-to. We replace those panels and fix the trim and closures around them.
- Full re-roof: rust is widespread, the old panels are too thin to hold a screw, or the barn is being enclosed or finished for living space and needs an insulation and vapor plan. See metal roof repair and restoration.
Whichever it is, we check the framing first. A new roof on rotted or undersized purlins is money spent twice.
Wind and hail around Sanger
Sanger's storm record reads like a list of what happens to barns. From NOAA's Storm Events Database:
- March 4, 2025: about five miles from town, wind lifted a grain silo and blew it about 300 feet into a neighboring yard.
- July 31, 2025: a microburst near FM 922 and FM 2848 in Valley View, about eight miles northwest, tore the roof off a barn. The debris hit high-voltage lines and was scattered over 1.2 miles, and a home weather station recorded a 66 mph gust.
- June 8, 2025: a trained spotter measured an 82 mph gust near the same FM 922 and FM 2848 intersection north of Sanger.
- September 21, 2025: winds estimated at 74 mph tore a 45- to 50-foot hole in the roof of a distribution center north of Sanger and partly collapsed a wall of another warehouse.
- July 10, 2019: part of the metal roof of a barn was peeled off about a mile and a half southeast of Era, roughly ten miles northwest.
- May 25, 2024, EF-1 tornado: a short-lived tornado on the southwest side of Ray Roberts Lake, about three miles from town, damaged homes on Jones Street.
Hail is less frequent than in southern Denton County, with NOAA listing 14 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Sanger from 2016 through the September 2026 update. But it includes the biggest: 5.9-inch hail at Sanger on June 15, 2023, about a mile and a half from the center of town, the largest NOAA lists anywhere in Denton County in that period, with 3-inch hail about two miles away the same day.
What wind does to a barn roof
A house is closed on all sides. Most barns aren't. Wind blowing into an open bay or a big door pushes up on the underside of the roof while it pulls on the top, so a barn roof takes load from both sides at once. That's why the failures we see follow a pattern:
- The edges go first. Eaves, rakes and the ridge carry the most uplift. If a panel is going to peel, it usually starts there, then the wind gets under the next one.
- Screws loosen before they let go. Years of heat and cold work exposed fasteners loose. A loose screw leaks first, then the panel starts to lift.
- Trim and closures matter. Missing foam closures and loose rake trim let wind and wasps in and give a gust something to grab.
- Old lean-tos are weak links. Additions framed lighter than the main barn, or lapped onto it badly, are where many barn roofs start to fail.
When we roof or repair a barn, the fastener spacing at the edges, the trim attachment and the condition of the purlins get the most attention, because that's what keeps the roof on the building.
Sanger permits, and barns out toward the lake
Inside city limits, Sanger's Building Inspection division requires permits for most residential construction work, including new structures, under the 2021 codes for permits issued on or after October 15, 2024. The fee schedule the City Council adopted in September 2024 (Ordinance 09-15-24) lists no permit for accessory buildings under 120 square feet, a permit for accessory buildings over 120 square feet, a re-roof permit, and double fees for work without a permit. What that means in practice:
- Re-roofing a barn in town: Sanger has a dedicated re-roofing permit, filed online through the city's Community Core portal with an aerial measurement report. We confirm it applies to your building and file it.
- Building a new barn or shop in town: it's an accessory building permit, and we confirm setbacks, height and use with Building Inspection at 940-458-2059 before we draw anything.
- Registered contractors only. The city's permits page says applications go through Community Core once a contractor is registered with the city, and registration runs January through December 31.
Most horse properties with a Sanger address are outside the city limits, on county land. There, Denton County's Development Services department requires a Development Permit for any new building or structure in unincorporated areas, and near the lake it also enforces the Lake Ray Roberts Land Use Ordinance. We check which rules apply to your tract before we build.
Horse barns and arenas: what we plan for
- Air and moisture. Horses put a lot of moisture into a closed barn. Ridge ventilation, eave openings and a vapor-control layer under the panels keep the steel from sweating onto stalls and tack.
- Light. Translucent panels in the roof or walls bring in daylight. Old ones turn brittle and crack, so we replace them with the roof.
- Wide spans. Covered arenas and long stall rows mean long panel runs and big open walls. We cut panels to the full length of each roof plane and pay extra attention to the edges, where wind pulls hardest.
- Water away from doors. Gutters or drip edges at stall doors and arena entries keep the footing dry.
- Quiet. Rain on bare steel is loud. Insulation under the panels helps if the barn holds nervous horses or an office.
New barns, built by our own crews
We don't only roof barns, we build them. For a new barn, pole barn, horse barn, shop or ag building, we can bring in an architect to spec the project, or build to the specs and plans you already have. Our own crews do the work from start to finish, and the roof can go on in a color that matches the house and the other buildings so the property looks like one place.
Details that decide whether a barn roof lasts
- Condensation control if the barn is enclosed, stores hay, houses animals or has any conditioned space. A vapor barrier or insulation under the panels and ventilation that suits the use keep it from "raining" inside. See condensation control under metal.
- Ridge and eave closures that fit the panel profile, so wind-driven rain, birds and wasps stay out.
- Flashing where buildings meet: lean-tos, porches, a shop wall or a stall row added later.
- Gutters and drainage where water would otherwise sheet onto a pad, an arena entry or a doorway. See gutters.
- Skylight panels replaced with the roof, because old clear panels turn brittle and crack long before the steel wears out.
- Color match across the house, barn and shop.
How a barn roof job runs with us
- Inspection and free digital photo report: panels, fasteners, trim, purlins and framing, with measurements. You see what we see.
- Written options: re-screw, re-panel or re-roof, with the panel, gauge, color, trim and fastener plan spelled out.
- Paperwork: we check whether your barn is inside city limits or on county land, then file what applies.
- Panels formed for your building on our own roll formers, cut to the length of each roof plane so long runs don't need mid-slope laps.
- Install by our own crew, with the edges, ridge and penetrations detailed for wind.
- Clean-up and walk-through: a magnet sweep for screws and scrap, so nothing ends up in a hoof or a tire, and your warranty in writing.
Storm damage and insurance on barns
Hail dents and punctures panels and cracks old washers, and wind lifts edges and tears trim. Whether a barn is covered, and for how much, depends on your policy: some cover farm and ranch buildings fully, some cover them for less, and some treat cosmetic dents differently from leaks. Our photo report separates storm damage from age and rust, which is what an adjuster needs to see. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.
Who roofs and builds barns in Sanger?
Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:
- 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
- Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
- 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
- Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
- Our own crew, working about 32 road miles (roughly 46 minutes) from Sanger out of our Decatur office.
- Snow Roofing & Exteriors is BBB A+ rated.
Photos
The barn image at the top is an illustration. The photos below are real metal roofs our crews installed on houses, shown so you can see our panel, trim and seam work up close. We don't have barn job photos from Sanger on file, so we don't show any. We never show a street or address.
We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. More in Sanger: metal roofing in Sanger, standing seam in Sanger, storm damage in Sanger, siding in Sanger, window replacement in Sanger, a real standing seam house roof between Sanger and Valley View and our Sanger roofing page. Nearby: barn roofing in Krum, barn roofing in Denton and metal roofs for horse barns and arenas.
Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.
Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.
