Barns, arenas and shops around the Parker County seat
Weatherford sits at the crossing of U.S. 180 and U.S. 80 about 30 miles west of Fort Worth, with I-20 along its south side. TSHA calls it the principal frontier settlement in North Texas in its first decade, and it's the Parker County seat. Census estimates show 30,882 residents in the 2020 base and about 40,634 in 2025. Outside town it's horse and cattle country, with barns, covered arenas, hay sheds and a growing number of barndominiums and shops on acreage.
Our Bridgeport office is about 36 road miles (roughly an hour) away, so we schedule Weatherford-area barn work in planned trips, and because we form panels on our own roll formers, we can cut each one to the full length of your roof. See why we form metal panels on site.
Which metal goes on which building
A barn roof isn't one product. What goes on a hay barn in Weatherford isn't always what belongs on a horse barn or a shop you can see from the back porch. Here's how we match the panel to the building:
| Building | What we usually recommend | Why |
|---|---|---|
| Hay barn, equipment barn, loafing shed | R-panel or PBR, 24 or 26 gauge | Strong ribs that span open purlins, quick to install, easy to repair a panel at a time |
| Pole barn or post-frame building | R-panel or PBR, with closures and trim made for the panel | The screw pattern at the eaves, rakes and ridge is what holds it down in a storm |
| Horse barn, stable or covered arena | R-panel, PBR or standing seam, with ventilation and condensation planned | Animals add moisture to the air, and bare steel sweats over it |
| Show barn, or a barn in full view of the house | Standing seam | Hidden fasteners, clean lines and no exposed screws to re-tighten later |
| Barndominium or barn with living space | Standing seam or R-panel over a planned insulation and vapor layer | See barndominium, shop and ag roofs |
| Sheds, carports, boat and RV covers | Corrugated, R-panel or PBR | Matches older buildings and keeps small jobs simple |
We form standing seam and R-panel on our own roll formers in 24 or 26 gauge, and we also offer corrugated and PBR panels. Metal lead time is typically 1 to 2 weeks. We don't post prices, because building size, framing condition, tear-off and trim change the number a lot. You get a written price for your building.
Re-screw, re-panel or re-roof?
Most old barn roofs don't have to come off. We walk the roof where it's safe, fly a drone where it isn't, look at the purlins from inside, and show you the photos behind our call:
- Re-screw: the panels are sound, but rubber washers have cracked in the sun or screws have backed out. New fasteners, one size up where the holes have worn oval, can add years to a roof that's otherwise fine.
- Partial re-panel: some panels are rusted through, punctured by hail or bent by wind, usually along the eaves, the rakes or an old lean-to. We replace those panels and fix the trim and closures around them.
- Full re-roof: rust is widespread, the old panels are too thin to hold a screw, or the barn is being enclosed or finished for living space and needs an insulation and vapor plan. See metal roof repair and restoration.
Whichever it is, we check the framing first. A new roof on rotted or undersized purlins is money spent twice.
Hail and wind around Weatherford
Weatherford gets both. NOAA's Storm Events Database records:
- May 29, 2019: northeast of Lake Weatherford, about nine miles from town, thunderstorm winds lifted a 42-by-40-foot barn about 8 feet, rotated it about 45 degrees and set it down 15 to 20 feet away.
- April 28, 2021: between Weatherford and Springtown, around Old Springtown Road, Katie Ranch Road and Friendship Road, a metal barn lost panels and other small barns appeared damaged.
- April 19, 2025, two tornadoes: an EF-0 southwest of town flipped an outbuilding along Royal Santana Run, and an EF-1 northwest of town, with winds to 110 mph, damaged sheds along Johnson Bend Road and tore roof covering off duplexes.
- August 4, 2025: in Brock, about 11 miles west, a 74 mph gust was recorded and a metal county precinct barn was heavily damaged.
Hail: NOAA lists 21 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Weatherford from 2016 through the September 2026 update, including several reports of 3-inch hail in and around Weatherford on June 1, 2025, one about a mile from the center of town, and 3-inch hail about four miles north-northwest on March 16, 2023. The latest was 1.75-inch hail near Annetta on April 28, 2026. Parker County as a whole logged 43 such reports. See our Parker County hail 2026 recap.
What wind does to a barn roof
A house is closed on all sides. Most barns aren't. Wind blowing into an open bay or a big door pushes up on the underside of the roof while it pulls on the top, so a barn roof takes load from both sides at once. That's why the failures we see follow a pattern:
- The edges go first. Eaves, rakes and the ridge carry the most uplift. If a panel is going to peel, it usually starts there, then the wind gets under the next one.
- Screws loosen before they let go. Years of heat and cold work exposed fasteners loose. A loose screw leaks first, then the panel starts to lift.
- Trim and closures matter. Missing foam closures and loose rake trim let wind and wasps in and give a gust something to grab.
- Old lean-tos are weak links. Additions framed lighter than the main barn, or lapped onto it badly, are where many barn roofs start to fail.
When we roof or repair a barn, the fastener spacing at the edges, the trim attachment and the condition of the purlins get the most attention, because that's what keeps the roof on the building.
Weatherford permits, and barns on county land
Inside the city limits, Weatherford's residential permit page lists accessory structures over 200 square feet and roof replacement or major repairs among the work that needs a permit, with plan review usually taking two to three business days under the 2021 codes. Its fee schedule lists residential accessory buildings at $100 plus $0.30 per square foot, and every contractor working in the city must register with at least $300,000 in general liability insurance. Those are city fees, not our price.
The city's zoning code (Sec. 12-5-102, as published online) adds two points for barns: buildings used for agriculture on property zoned AG aren't treated as accessory structures, and in other districts an accessory building over 400 square feet should match the pitch of the house's main roof. We check both before we draw a new barn or shop.
Outside city limits, Parker County's Permitting Department says plainly that the county does not issue building permits or certificates of occupancy, and there is no zoning in the unincorporated county. What the county does permit is septic systems (on-site sewage facilities) and any development inside a mapped special flood hazard area. Commercial and multifamily projects go to the county fire marshal for review. So a barn on county land usually needs no county permit, but a barn with a bathroom needs the septic permit, and one near a creek may need the floodplain permit first.
Covered arenas and long, open barns
Covered arenas, hay barns and equipment sheds take wind the hardest: open sides, long roof runs, and nothing to break a gust. The 2019 storm that lifted a 42-by-40 barn off its spot near Lake Weatherford is the extreme case, but most failures start smaller, with a loose rake trim or a row of backed-out screws at the eave. On these buildings we focus on the fastener pattern at the eaves and rakes, the condition of the purlins and their connections, and panel length. Full-length panels from our own roll formers mean no mid-slope laps for wind and water to work at.
New barns, built by our own crews
We don't only roof barns, we build them. For a new barn, pole barn, horse barn, shop or ag building, we can bring in an architect to spec the project, or build to the specs and plans you already have. Our own crews do the work from start to finish, and the roof can go on in a color that matches the house and the other buildings so the property looks like one place.
Details that decide whether a barn roof lasts
- Condensation control if the barn is enclosed, stores hay, houses animals or has any conditioned space. A vapor barrier or insulation under the panels and ventilation that suits the use keep it from "raining" inside. See condensation control under metal.
- Ridge and eave closures that fit the panel profile, so wind-driven rain, birds and wasps stay out.
- Flashing where buildings meet: lean-tos, porches, a shop wall or a stall row added later.
- Gutters and drainage where water would otherwise sheet onto a pad, an arena entry or a doorway. See gutters.
- Skylight panels replaced with the roof, because old clear panels turn brittle and crack long before the steel wears out.
- Color match across the house, barn and shop.
How a barn roof job runs with us
- Inspection and free digital photo report: panels, fasteners, trim, purlins and framing, with measurements. You see what we see.
- Written options: re-screw, re-panel or re-roof, with the panel, gauge, color, trim and fastener plan spelled out.
- Paperwork: we check whether your barn is inside city limits or on county land, then file what applies.
- Panels formed for your building on our own roll formers, cut to the length of each roof plane so long runs don't need mid-slope laps.
- Install by our own crew, with the edges, ridge and penetrations detailed for wind.
- Clean-up and walk-through: a magnet sweep for screws and scrap, so nothing ends up in a hoof or a tire, and your warranty in writing.
Storm damage and insurance on barns
Hail dents and punctures panels and cracks old washers, and wind lifts edges and tears trim. Whether a barn is covered, and for how much, depends on your policy: some cover farm and ranch buildings fully, some cover them for less, and some treat cosmetic dents differently from leaks. Our photo report separates storm damage from age and rust, which is what an adjuster needs to see. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.
Who roofs and builds barns in Weatherford?
Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:
- 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
- Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
- 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
- Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
- Our own crew, working about 36 road miles (roughly an hour) from Weatherford out of our Bridgeport office.
- Snow Roofing & Exteriors is BBB A+ rated.
Photos
The barn image at the top is an illustration. The photos below are real metal roofs our crews installed on houses, shown so you can see our panel, trim and seam work up close. We don't have barn job photos from Weatherford on file, so we don't show any. We never show a street or address.
We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. More nearby: barn roofing in Springtown, barn roofing in Azle, barndominium, shop and ag roofs, the May 28, 2026 hail around Lake Weatherford and our Weatherford roofing page.
Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.
Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.
