Acreage, barns and shops on the north end of Parker County
Springtown sits on State Highway 199 near the north edge of Parker County. TSHA says Joseph Ward settled the spring-fed site in 1856 and named it Littleton's Springs; it was renamed Springtown in the mid-1870s and incorporated in 1884. It's growing fast: Census estimates show 3,062 residents in the 2020 base and about 5,204 in 2025. Around town, older hay barns and pole barns share the road with new barndominiums, shops and horse property on a few acres.
A lot of those older barns don't need a new roof yet. See our guide to re-screw vs. re-panel on an old metal barn. Our Bridgeport office is about 18 road miles (roughly 34 minutes) away.
Which metal goes on which building
A barn roof isn't one product. What goes on a hay barn in Springtown isn't always what belongs on a horse barn or a shop you can see from the back porch. Here's how we match the panel to the building:
| Building | What we usually recommend | Why |
|---|---|---|
| Hay barn, equipment barn, loafing shed | R-panel or PBR, 24 or 26 gauge | Strong ribs that span open purlins, quick to install, easy to repair a panel at a time |
| Pole barn or post-frame building | R-panel or PBR, with closures and trim made for the panel | The screw pattern at the eaves, rakes and ridge is what holds it down in a storm |
| Horse barn, stable or covered arena | R-panel, PBR or standing seam, with ventilation and condensation planned | Animals add moisture to the air, and bare steel sweats over it |
| Show barn, or a barn in full view of the house | Standing seam | Hidden fasteners, clean lines and no exposed screws to re-tighten later |
| Barndominium or barn with living space | Standing seam or R-panel over a planned insulation and vapor layer | See barndominium, shop and ag roofs |
| Sheds, carports, boat and RV covers | Corrugated, R-panel or PBR | Matches older buildings and keeps small jobs simple |
We form standing seam and R-panel on our own roll formers in 24 or 26 gauge, and we also offer corrugated and PBR panels. Metal lead time is typically 1 to 2 weeks. We don't post prices, because building size, framing condition, tear-off and trim change the number a lot. You get a written price for your building.
Re-screw, re-panel or re-roof?
Most old barn roofs don't have to come off. We walk the roof where it's safe, fly a drone where it isn't, look at the purlins from inside, and show you the photos behind our call:
- Re-screw: the panels are sound, but rubber washers have cracked in the sun or screws have backed out. New fasteners, one size up where the holes have worn oval, can add years to a roof that's otherwise fine.
- Partial re-panel: some panels are rusted through, punctured by hail or bent by wind, usually along the eaves, the rakes or an old lean-to. We replace those panels and fix the trim and closures around them.
- Full re-roof: rust is widespread, the old panels are too thin to hold a screw, or the barn is being enclosed or finished for living space and needs an insulation and vapor plan. See metal roof repair and restoration.
Whichever it is, we check the framing first. A new roof on rotted or undersized purlins is money spent twice.
Springtown's recent wind and hail
Springtown has taken a beating the last two springs. NOAA's Storm Events Database records:
- April 25, 2026, EF-1 tornado: it started west-northwest of Springtown, about three miles from town, and tracked almost 10 miles southeast. NOAA says most of the damage was large limbs down and damage to lightweight and metal buildings and roofs, with peak winds near 105 mph. Rear-flank winds of 80 to 100 mph hit just outside the track, and an amateur radio operator measured an 89 mph gust.
- March 4, 2025: winds estimated at 85 mph lifted the carport awning off the Springtown Senior Center and peeled back the metal and wood roof under it.
- September 19, 2023: photos showed blown sheet metal and damaged metal sheds northwest of Springtown, about a mile from town.
- April 28, 2021: between Weatherford and Springtown, around Old Springtown Road and Katie Ranch Road, a metal barn lost panels and other small barns appeared damaged.
Hail: NOAA lists 20 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Springtown from 2016 through the September 2026 update, including 2.5-inch hail at Springtown on April 1, 2024, the same storm that dropped 4.5-inch hail near Keeter, about five miles north, and 2-inch hail at Springtown on October 20, 2019. On April 25, 2026, golf-ball hail or larger fell at several spots around town, up to 3 inches near Azle.
What wind does to a barn roof
A house is closed on all sides. Most barns aren't. Wind blowing into an open bay or a big door pushes up on the underside of the roof while it pulls on the top, so a barn roof takes load from both sides at once. That's why the failures we see follow a pattern:
- The edges go first. Eaves, rakes and the ridge carry the most uplift. If a panel is going to peel, it usually starts there, then the wind gets under the next one.
- Screws loosen before they let go. Years of heat and cold work exposed fasteners loose. A loose screw leaks first, then the panel starts to lift.
- Trim and closures matter. Missing foam closures and loose rake trim let wind and wasps in and give a gust something to grab.
- Old lean-tos are weak links. Additions framed lighter than the main barn, or lapped onto it badly, are where many barn roofs start to fail.
When we roof or repair a barn, the fastener spacing at the edges, the trim attachment and the condition of the purlins get the most attention, because that's what keeps the roof on the building.
Springtown permits, and barns on county land
Inside the city limits, Springtown builds to the 2018 International Building and Residential Codes with the North Central Texas regional amendments. The city's zoning allows an accessory building in every district, but no shipping or intermodal containers. Permit fees follow the city's adopted schedule and vary with the type, size and scope of the project; they're paid before the permit is issued, and work waits until it is. We confirm with City Hall at (817) 220-4834 before we start.
Outside city limits, Parker County's Permitting Department says plainly that the county does not issue building permits or certificates of occupancy, and there is no zoning in the unincorporated county. What the county does permit is septic systems (on-site sewage facilities) and any development inside a mapped special flood hazard area. Commercial and multifamily projects go to the county fire marshal for review. So a barn on county land usually needs no county permit, but a barn with a bathroom needs the septic permit, and one near a creek may need the floodplain permit first.
After the April 2026 storm: what to check on a barn
If your barn was anywhere near the April 25, 2026 tornado track or the hail that came with it, a quick look from the ground can miss what matters. These are the things we check first:
- Edges and ridge: panels lifted even a little at the eaves, rakes or ridge, and rake trim pulled loose. That's where the next storm gets under the roof.
- Fasteners: screws pulled through, backed out or sitting crooked, and washers torn.
- Hail: punctures or split seams on thin old panels, cracked skylight panels, and dents along the ribs.
- Framing: purlins that twisted or pulled loose from the rafters, which shows up as a wavy roof line.
We photograph all of it and give you the report, whether or not you file a claim.
New barns, built by our own crews
We don't only roof barns, we build them. For a new barn, pole barn, horse barn, shop or ag building, we can bring in an architect to spec the project, or build to the specs and plans you already have. Our own crews do the work from start to finish, and the roof can go on in a color that matches the house and the other buildings so the property looks like one place.
Details that decide whether a barn roof lasts
- Condensation control if the barn is enclosed, stores hay, houses animals or has any conditioned space. A vapor barrier or insulation under the panels and ventilation that suits the use keep it from "raining" inside. See condensation control under metal.
- Ridge and eave closures that fit the panel profile, so wind-driven rain, birds and wasps stay out.
- Flashing where buildings meet: lean-tos, porches, a shop wall or a stall row added later.
- Gutters and drainage where water would otherwise sheet onto a pad, an arena entry or a doorway. See gutters.
- Skylight panels replaced with the roof, because old clear panels turn brittle and crack long before the steel wears out.
- Color match across the house, barn and shop.
How a barn roof job runs with us
- Inspection and free digital photo report: panels, fasteners, trim, purlins and framing, with measurements. You see what we see.
- Written options: re-screw, re-panel or re-roof, with the panel, gauge, color, trim and fastener plan spelled out.
- Paperwork: we check whether your barn is inside city limits or on county land, then file what applies.
- Panels formed for your building on our own roll formers, cut to the length of each roof plane so long runs don't need mid-slope laps.
- Install by our own crew, with the edges, ridge and penetrations detailed for wind.
- Clean-up and walk-through: a magnet sweep for screws and scrap, so nothing ends up in a hoof or a tire, and your warranty in writing.
Storm damage and insurance on barns
Hail dents and punctures panels and cracks old washers, and wind lifts edges and tears trim. Whether a barn is covered, and for how much, depends on your policy: some cover farm and ranch buildings fully, some cover them for less, and some treat cosmetic dents differently from leaks. Our photo report separates storm damage from age and rust, which is what an adjuster needs to see. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.
Who roofs and builds barns in Springtown?
Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:
- 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
- Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
- 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
- Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
- Our own crew, working about 18 road miles (roughly 34 minutes) from Springtown out of our Bridgeport office.
- Snow Roofing & Exteriors is BBB A+ rated.
Photos
The barn image at the top is an illustration. The photos below are real metal roofs our crews installed on houses, shown so you can see our panel, trim and seam work up close. We don't have barn job photos from Springtown on file, so we don't show any. We never show a street or address.
We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. More nearby: barn roofing in Weatherford, barn roofing in Azle, barn roofing in Boyd, metal roof colors for a stone ranch house and our Springtown roofing page.
Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.
Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.
