Snow Roofing & Exteriors logo Call (817) 733-9228
Blog

Enviroshake HOA Packet Guide for Vaquero, Timarron and Trophy Club: The Committee Rules and Warranty Paperwork to Bring

By Blake Snow, owner ·

Overhead drone view of an Enviroshake composite shake roof with hips, a chimney and metal accents
Enviroshake composite shake field, hips and chimney

If you want an Enviroshake roof in Vaquero, Timarron or one of Trophy Club’s neighborhoods, the hard part usually isn’t the roof. It’s getting a committee to say yes in writing. I already wrote a general guide to building an Enviroshake HOA packet (samples, colors, permits). This post is narrower: what these three specific associations publish about roofs, and the Enviroshake paperwork that answers each of their questions.

I’m Blake Snow. I’ve been roofing for 30 years, and Snow Roofing & Exteriors is certified with Enviroshake. Everything below about Enviroshake comes from Enviroshake’s own warranty, installation and testing pages, and everything about the associations comes from their published guidelines or the town’s ordinance. Where a document isn’t public, I say so.

The short answer

  • Timarron (Southlake/Colleyville): Enviroshake is not on either of Timarron’s named roofing lists, but the guidelines allow “advanced composites” subject to committee approval. Send a complete packet and expect a case-by-case review.
  • The Highlands at Trophy Club: the town’s PD-27 standards call for roofing with a minimum 30-year installation and manufacturer’s warranty and ban wood shingles. Plan on Enviroshake’s 50-year Gold-Level system (it requires Enviroshield underlayment), not the 25-year Standard-Level.
  • Vaquero (Westlake): the design guidelines sit behind the residents’ portal. Get the current Architectural Review Committee (ARC) form and roof standards from the association before you submit.
  • Everywhere: the committee approves the look; the city or town permits the work. Enviroshake’s warranty depends on a Factory Trained Installer and registration within 30 days.

What Enviroshake’s own rules say (the part committees ask about)

Committees often ask, “What happens to the warranty?” Here’s what Enviroshake publishes:

ItemGold-Level warrantyStandard-Level warranty
Coverage period50 years25 years
Residential and commercialYesYes
Enviroshield synthetic underlaymentRequiredNot required
Factory Trained Enviroshake InstallerRequiredRequired
TransferableFully transferableFully transferable

Source: Enviroshake’s Warranty & Registration page and its warranty explainer.

A few more installation rules from Enviroshake that belong in your packet:

  • A Factory Trained Installer must be on the job at all times. Enviroshake’s contractor page says installers sign a document confirming that at least one Factory Trained Installer is on every project at all times, and that failing to do so voids the product warranty. Enviroshake issues an official certificate when a contractor reaches full Factory Trained status.
  • Enviroshield goes over the entire deck for the Gold-Level warranty, per the same page.
  • The warranty covers materials, not labor. Enviroshake’s explainer says homeowners are responsible for labor, tear-off, metal and flashing work, underlayment and disposal. That’s why your contractor’s workmanship warranty belongs in the packet too.
  • Snow guards. Enviroshake’s installation page says that where a roof sees snow or hail, it highly recommends Alpine SnowGuards. They’re visible from the street, so show them on the drawings if you plan to use them.

Timarron: what the Modifications Committee publishes

Timarron’s Design Review Guidelines (April 2025 edition) are unusually specific about roofs. The parts that matter for Enviroshake:

Process. Every modification needs written Modifications Committee (MC) approval before work starts. The guidelines say there are “no exemptions or automatic approvals.” The MC typically decides within 30 days, and the answer comes back as Approved, Approved with Stipulation, Denied, or Waiting Pending Additional Information. Appeals must be in writing within 30 days. Approved work has to be finished within six months unless the MC grants an extension, and any change from the approved plans has to be resubmitted.

Roof look. Roofing must have dimension “to create an appearance of layering and variable depth.” No three-tab shingles. The color should complement the home and fit the neighborhood. Ridge caps must match the roof color. The guidelines name asphalt-fiberglass composite shingles, clay tile, slate and “advanced composites” as ways to get that look, then add: “Roofing materials permitted may be restricted.”

Named lists. Timarron assigns each neighborhood to Type I (named hail-resistant shingle lines) or Type II (named standard shingle lines). Enviroshake isn’t on either list, so you’re asking the MC to approve a material by its merits. That’s exactly what the packet below is for.

Valleys. This one surprises people. Timarron requires open valleys in some neighborhoods (Bent Creek, Cascades, Chadwick Crossing, Clubhouse Estates, Crescent Royale, Eagle Bend Estates, Estates of Bent Creek, Glendover, Huntly Manor, Strathmore) and closed valleys in others (Brenwyck, Bryson Square, Highlands, Northwood Park, Warwick Green, Wyndsor Creek, Wyndsor Grove). Open valleys must be coated metal, prefinished baked-enamel metal or copper, in a color that matches or blends with the roof. Enviroshake’s HOA page FAQ says it recommends copper in the valleys. Copper open valleys tend to suit a cedar-look roof well, but show the valley detail in your submittal either way.

Other roof items. Vents, flues, turbines, power vents and chimney or sidewall flashing must be painted to match or blend with the roof, and stacks should go on rear slopes where possible. Metal accents over a canopy or bay window must be standing seam in bronze or copper.

Submittal list (roofing section). The manufacturer, color and technical specifications; a photo of the proposed material in the selected color; and a photo of the house showing the existing roof. Timarron also reminds owners that City of Southlake or City of Colleyville permits are separate, and that city approval doesn’t replace MC approval (or the other way around).

The Highlands at Trophy Club: the 30-year line

Trophy Club has several associations, so start with your own. If you’re in The Highlands at Trophy Club, the town’s Planned Development District 27 (PD-27) standards (reprinted in the Town of Trophy Club’s April 9, 2026 Planning & Zoning packet) say:

  • Roofs must be built “of a process and of materials that shall have a minimum installation and manufacture’s warranty of thirty (30) years.”
  • Minimum roof pitch is 6/12 (except sheds and porches).
  • Seamless and standing seam metal roofs are permitted if they’re architectural quality.
  • No wooden shingles.

That last rule is why a lot of Highlands owners who love the cedar look end up asking about composite shake. And the first rule is why the warranty level matters: Enviroshake’s Gold-Level warranty is 50 years; its Standard-Level is 25. In The Highlands, I’d plan on the Gold-Level system with Enviroshield, and put the warranty level right on the application.

The ordinance says “installation and manufacturer’s” warranty. Ask the association how it reads that wording before you submit, and include your contractor’s written workmanship warranty in the packet. The Highlands HOA takes architecture requests through its TownSq portal, according to the association’s site. Other Trophy Club associations have their own forms. Follow whichever one governs your lot.

Vaquero: get the current guidelines first

Vaquero’s recorded management certificate (filed with Tarrant County and posted by the Texas Real Estate Commission’s HOA registry) lists vaqueroHOA.com as the site where the association’s dedicatory instruments are posted. That site is a resident login, so I won’t guess at its roof rules here. What I tell Vaquero owners:

  1. Log in (or ask the management company) and download the current design guidelines and ARC application. Check the edition date.
  2. Look for the roof section: allowed materials, color rules, ridge and valley details, and whether composite or synthetic shake is named.
  3. Check whether the ARC wants a physical sample, elevations, or a site plan with the application, and whether there are review fees or deposits.
  4. Ask how long review usually takes. Build that time into your schedule, especially if this is a storm-claim roof.

Vaquero homes have long, very visible roof planes, often on fairway lots. A full-size sample board on your own elevation, photographed in morning and afternoon light, usually does more for a committee than a brochure chip.

The packet: each committee question and the document that answers it

What the committee is askingDocument to includeWho supplies it
What exactly is the product?Enviroshake product data/spec sheet for the shake and the hip & ridge piecesContractor (from Enviroshake’s documents page)
What color, and will it fit?Exact color name (Aged Cedar, Silvered Cedar, Tropical Silver, Multi-tone or a custom color) plus a physical sample and photos of it on your houseOwner and contractor (request a sample)
Does it look like the existing roof and neighborhood?Photo of the house showing the existing roof (Timarron requires it) and street-view photosOwner
How does it perform?Enviroshake’s published testing: UL 2218 Class 4 impact; Class A ASTM E108 fire-rated assemblies available; Miami-Dade NOA 24-0222.06 wind; Texas Department of Insurance RC-534Contractor (from Enviroshake’s testing page)
What’s the warranty?Warranty level (Gold 50-year or Standard 25-year), Enviroshield underlayment noted for GoldContractor
Is the installer qualified?Factory Trained Enviroshake Installer certificateContractor
What about valleys, ridge and flashing?Valley type and metal (open/closed, copper or color-matched), ridge cap color, vent and flashing paint colorContractor
Who’s on the job?Certificate of insurance and a written scope with start windowContractor
Is it permitted?Note that the city or town permit will be pulled after written approvalContractor

We supply the contractor-side documents on that list (product and testing sheets, our Enviroshake installer certificate, insurance certificate and a written scope), and we’ll help you photograph the sample on your house.

A word on Texas Property Code 202.011

Section 202.011 limits how an association can prohibit shingles designed to be wind and hail resistant, as long as they resemble what’s allowed, are at least as durable, and match the look of the surrounding homes. Enviroshake is a composite shake with a UL 2218 Class 4 rating, but the statute talks about shingles, and associations read it differently. I don’t treat it as a hammer. A complete, good-looking packet gets better results than a legal argument, and if you think the statute applies to your case, that’s a conversation for the committee or an attorney.

After the roof goes on: register and keep the paper trail

Enviroshake’s registration page says:

  1. Register within 30 days of installation.
  2. Upload a photo of the completed roof and a copy of the paid invoice.
  3. Confirm the installer is a Factory Trained Enviroshake Installer.
  4. Enviroshake emails the certificate within five business days, and may inspect the roof if needed.

Keep the warranty certificate, the committee’s approval letter, the permit final and our photo report together. When you sell, buyers and their insurers may ask for exactly those. Since both Enviroshake warranty levels are fully transferable, that file also helps the next owner.

Replacing after hail? Mind the calendar

If this roof is part of an insurance claim, remember committee review takes time (Timarron says it typically decides within 30 days, and other associations vary). In Texas you generally have 1 year from the date of loss to file, but check your policy. Get the claim started and the damage documented first, then run the HOA packet in parallel. Our Enviroshake vs. real cedar and Enviroshake vs. DaVinci posts can help if the committee asks why composite over wood or another synthetic. Enviroshake’s HOA page is also worth printing for the committee.

Talk to us about an Enviroshake roof in Westlake, Southlake or Trophy Club

We install Enviroshake across Westlake, Southlake, Trophy Club, Colleyville, Roanoke and Keller. We’re certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. Our workmanship warranty runs from 10 years up to lifetime, depending on the job. We’re fully insured, BBB A+ rated, and have 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. Every inspection includes a free digital photo report with drone and thermal imaging.

See our Enviroshake roofing page and HOA-compliant roof replacement guide, use the estimate form below, or call (817) 733-9228.

Sources

Frequently asked questions

Is Enviroshake on the Timarron approved roofing list?

Not by name. Timarron's Design Review Guidelines (April 2025 edition) list specific shingle lines for Type I and Type II neighborhoods. The same section says the roof look can be achieved with materials including advanced composites, and that every roofing project is subject to Modifications Committee approval. So an Enviroshake request in Timarron is a case-by-case application, and a complete packet matters.

What does the Timarron Modifications Committee want with a roof application?

Per the guidelines: the modification form, the roofing manufacturer, color and technical specifications, a photo of the proposed material in the selected color, and a photo of the house showing the existing roof. Approval must be in writing before work starts, the committee typically decides within 30 days, and approved work must be finished within six months unless the committee extends it.

Does Enviroshake meet the Highlands at Trophy Club 30-year roof rule?

The Town of Trophy Club's PD-27 standards for The Highlands say roofs must use materials with a minimum installation and manufacturer's warranty of 30 years, and ban wood shingles. Enviroshake's Gold-Level warranty is 50 years and requires Enviroshield underlayment; the Standard-Level warranty is 25 years. If you're in The Highlands, plan on the Gold-Level system and ask the association how it reads the installation-warranty wording.

How do I register an Enviroshake warranty?

Enviroshake says to register online within 30 days of installation, upload a photo of the finished roof and the paid invoice, and confirm the installer is a Factory Trained Enviroshake Installer. Enviroshake says the certificate comes by email within five business days and that it may inspect the roof if needed.

Where do I get the Vaquero design guidelines?

Vaquero's recorded management certificate lists vaqueroHOA.com as the site where the association's dedicatory instruments are posted. The site is a resident login, so sign in or ask the management company for the current design guidelines and Architectural Review Committee form before you pick a color.

Can an HOA in Texas block an impact-resistant roof?

Texas Property Code Section 202.011 limits how an association can block shingles designed to be wind and hail resistant when they resemble, are at least as durable as, and match the look of what the neighborhood allows. It is written about shingles, so how it applies to a composite shake is a question for your committee or an attorney. We treat a well-documented packet as the better path.

Get a free roof inspection

We get on the roof, photograph what we find, and tell you plainly whether you need a repair or a replacement.

Get a free estimate

Tell us how to reach you. Blake or the team will call you back.

Or call (817) 733-9228 snowexteriors@gmail.com