Offices in Bridgeport · Decatur · Rhome · Class 3+ impact-rated shingles on every roof Call (817) 733-9228
Snow Roofing & Exteriors logo

Free Roof Replacement Estimate

📞 Call (817) 733-9228
Blog

TAMKO StormFighter FLEX 3 Is Discontinued: Repairs, Matching and Moving to Class 4 StormFighter FLEX in Decatur

By Blake Snow, owner ·

Close-up of dark gray impact-resistant architectural shingles on a roof
Illustration

If your Decatur or Wise County home was roofed with TAMKO StormFighter FLEX in the last few years, there’s a good chance nobody told you there were two versions. There were: FLEX 3 and FLEX 4. And one of them is gone.

I’m Blake Snow. I’ve been roofing for 30 years, and our crews work out of Bridgeport, Decatur and Rhome. Here’s what TAMKO’s own documents say, and what it means the next time hail or wind takes shingles off your roof.

What TAMKO discontinued, in its own words

On January 21, 2025, TAMKO sent a memo to its distribution partners. It said:

  • StormFighter FLEX 3 shingles: “Production… has been discontinued. However, StormFighter FLEX 4 shingles will continue to be manufactured.”
  • Heritage Vintage shingles: discontinued (we covered that in our Heritage Vintage repair guide).
  • TAMKO ventilation products: CoolRidge, QuickVent, Roll Vent, Rapid Ridge, Xtractor Vent and XLP Turbo, all discontinued.

Remaining inventory was sold first come, first served while it lasted. Almost two years later, plan on FLEX 3 being unavailable for repairs.

FLEX 3 vs. FLEX 4: the only big difference is the impact class

TAMKO’s StormFighter FLEX 3 & 4 data sheet (Rev. 07/31/2023, made in Phillipsburg, Kansas) lists the two side by side:

StormFighter FLEX 3StormFighter FLEX 4 (now sold as StormFighter FLEX)
StatusDiscontinued (TAMKO memo, 1/21/2025)In production
Impact rating (UL 2218)Class 3Class 4
Shingle size13-1/4” x 39-3/8”13-1/4” x 39-3/8”
Exposure5-5/8”5-5/8”
AsphaltForceFX polymer-modifiedForceFX polymer-modified
Nail lineAnchorLock 2” poly strip, 1-1/2” Rapid Fire ZoneSame
WindASTM D7158 Class H, D3161 Class F; 160 mph 15-year limited wind warranty with high-wind applicationSame
Base warrantyLimited Lifetime (single-family), 10-year Full Start, 10-year algae cleaningSame
Minimum slope2:12 (low-slope rules from 2:12 to under 4:12)Same

Today TAMKO’s StormFighter FLEX page just calls the line StormFighter FLEX, rated UL 2218 Class 4. TAMKO adds that its 160 mph WindGuard warranty requires TAMKO starter and TAMKO hip and ridge and its High Wind Application Instructions.

How to tell which one you have

FLEX 3 and FLEX 4 look the same on the roof, so don’t guess from the street. Check, in this order:

  1. Your invoice or contract. A good one names the exact product, not just “TAMKO.”
  2. The TAMKO warranty registration or paperwork your roofer gave you.
  3. Leftover bundles in the garage. The wrapper names the product.
  4. Your insurance file. If you got an impact-resistant roof credit, there may be a TDI Form PC068 with the product listed.

If none of that turns up, assume Class 3 until proven otherwise. That’s the safe way to talk to your insurer.

Repairs: why a FLEX 4 patch may still show

The good news: TAMKO’s data sheet gives FLEX 3 and FLEX 4 the same size and exposure, so new shingles fit the courses on your roof.

The catch is color. Shingles change color as they weather, and new shingles in the same color name won’t match a roof that’s been in the North Texas sun for a few years. TAMKO itself recommends looking at an installed roof of the same color and the same plant before you choose, because colors vary by plant.

What we do on a FLEX 3 repair:

  • Pull a shingle from a hidden spot and compare it to new bundles in daylight.
  • Tell you before the job whether the patch will show, and how much.
  • Seal and nail to TAMKO’s application instructions, including the AnchorLock nail line.
  • Check your ridge vent. If it’s one of the discontinued TAMKO vents, any vent repair needs a replacement product, and we’ll put that on the quote.

If the damage is widespread, a patchwork repair can cost you more in looks and resale than it saves. That’s where an insurance claim comes in.

Class 3 vs. Class 4 and your insurance

A Class 4 repair on a Class 3 roof doesn’t make it a Class 4 roof. The Texas Department of Insurance says insurers that offer impact-resistant roof credits set their own amounts, testing criteria and paperwork. When a qualifying roof is installed, the roofer fills out TDI Form PC068. Call your agent first and ask:

  • Do you give a credit for UL 2218 Class 4? How much?
  • Does it apply to the whole roof only, or to repairs?
  • What paperwork do you need from the roofer?

StormFighter FLEX colors for the Decatur area

TAMKO’s color-by-location chart (2025) shows StormFighter FLEX for the Dallas service area (which covers our part of Texas) supplied from the Phillipsburg, Kansas plant in:

  • America’s Natural Colors: Black Walnut, Thunderstorm Grey
  • Classic Colors: Olde English Pewter, Oxford Grey, Rustic Black, Rustic Cedar, Rustic Slate, Weathered Wood

TAMKO’s product page lists seven of those (no Weathered Wood) and says availability varies by region, so we confirm your color with our supplier before you sign.

Re-roof options if you’re replacing

Every shingle roof we install is Class 3 impact-rated or better. If you’re replacing a FLEX 3 roof after a storm:

  • StormFighter FLEX (Class 4) keeps you in the same family, with the same size and look.
  • Other Class 4 shingles from the manufacturers we’re certified with. Compare them on our best Class 4 shingles for Texas guide.
  • Metal. Out here, a lot of homeowners and ranches move to standing seam or R-panel. We run our own roll formers, use 24 or 26 gauge, and metal lead time is typically 1 to 2 weeks. See metal roofing in Decatur.

After a hailstorm in Wise County

Wise County gets regular hail. You can look up past storms near you in NOAA’s Storm Events Database. If a storm hits:

  1. Take photos from the ground and note the date.
  2. Get a free inspection. We do it with drone and thermal imaging and give you a digital photo report.
  3. File with your insurer. In Texas you generally have 1 year from the date of loss to file a claim, but check your policy.

TAMKO’s warranty is for product defects. Its data sheet says plainly that UL 2218 uses a dropped steel ball that may not match real storm hail.

What goes on our TAMKO repair and re-roof quotes

  • Exact product (StormFighter FLEX, Titan XT, Heritage) and color, plus the plant when it matters for matching
  • Whether a repair will match, in writing
  • Starter, hip and ridge and ventilation products, including replacements for discontinued TAMKO vents
  • Underlayment, flashing and deck repair allowance
  • Free digital photo report, and our workmanship warranty from 10 years up to lifetime, depending on the job

More on TAMKO: Titan XT vs. Heritage and our TAMKO shingles page.

Talk to us about a StormFighter FLEX roof in Decatur

We repair and replace TAMKO roofs across Decatur, Bridgeport, Rhome, Boyd, Paradise and Chico. TAMKO roofs are installed to manufacturer specs by certified installers. We’re certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. We’re BBB A+ rated, with 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. Request a free inspection or call (817) 733-9228.

Sources

Frequently asked questions

Is TAMKO StormFighter FLEX 3 discontinued?

Yes. In a January 21, 2025 memo to its distribution partners, TAMKO said production of StormFighter FLEX 3 shingles had been discontinued and that StormFighter FLEX 4 shingles would continue to be made. Remaining inventory was sold first come, first served while supply lasted.

What's the difference between StormFighter FLEX 3 and FLEX 4?

The impact rating. TAMKO's StormFighter FLEX 3 & 4 data sheet (Rev. 07/31/2023) says FLEX 3 is UL 2218 Class 3 and FLEX 4 is UL 2218 Class 4. The same sheet lists the same 13-1/4 x 39-3/8 inch size, 5-5/8 inch exposure, ForceFX polymer asphalt, AnchorLock reinforced nail line and 160 mph wind warranty option for both.

Can I repair a StormFighter FLEX 3 roof with FLEX 4 shingles?

The size and exposure are the same on TAMKO's data sheet, so the shingles fit. Color is the hard part: a new bundle won't match shingles that have weathered in the Texas sun, even in the same color name. We pull a shingle, compare it in daylight, and tell you before we start whether the repair will show.

Will a few Class 4 shingles make my roof Class 4 for insurance?

No. A repair with Class 4 shingles doesn't change the rest of a Class 3 roof. The Texas Department of Insurance says insurers set their own impact-resistant roof credits and paperwork, and TDI Form PC068 documents the roof covering that was installed. Ask your agent what qualifies before you choose.

What StormFighter FLEX colors can I get in Decatur?

TAMKO's color-by-location chart (2025) shows StormFighter FLEX for the Dallas service area supplied from its Phillipsburg, Kansas plant in Black Walnut, Thunderstorm Grey, Olde English Pewter, Oxford Grey, Rustic Black, Rustic Cedar, Rustic Slate and Weathered Wood. TAMKO's product page lists seven of those colors and says availability varies by region, so we confirm with our supplier before you pick.

Does TAMKO's warranty cover hail?

Manufacturer warranties cover product defects, not storm damage. TAMKO also notes that UL 2218 uses a dropped steel ball that may not match real storm hail. Hail damage goes through your homeowners insurance. In Texas you generally have 1 year from the date of loss to file a claim, but check your policy.

Get a free roof inspection

We get on the roof, photograph what we find, and tell you plainly whether you need a repair or a replacement.

Free Roof Replacement Estimate

📞 Call (817) 733-9228

Certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake

Atlas Roofing certified contractor
📞 (817) 733-9228