Snow Roofing & Exteriors logo Call (817) 733-9228
Decatur, TX · Metal roofing

Metal Roofing in Decatur, TX

We have an office in Decatur, and a growing share of our Decatur work is homeowners trading a worn or hail-hit shingle roof for metal. We form our standing seam panels on our own roll formers and standing seam machine, right on the jobsite, and our own crew installs them. Every standing seam and R-panel roof we install is 24 or 26 gauge. Call (817) 733-9228.
  • Hidden screws and clean, straight lines
  • Formed on our own roll formers, right on the job
  • 24 or 26 gauge steel in many colors
  • Workmanship warranty from 10 years up to lifetime, depending on the job
Illustration of a modern farmhouse with a bronze standing seam metal roof

Decatur is growing, and so are its roof questions

Decatur, the Wise County seat, went from 6,554 residents in the 2020 Census base to an estimated 9,029 in 2025. That means three very different kinds of roof around town:

  • New subdivisions where builder-grade shingles are reaching their first replacement, often early because of hail.
  • Older homes near the square with steep roofs, add-ons and a few layers of history.
  • Acreage on the edges of town with a house, a shop and a barn that all need roofs.

Metal works on all three, but the right panel is different for each, and that's where most of our Decatur conversations start.

Moving from builder-grade shingles to metal

If you're in a newer Decatur neighborhood, the first question is usually "Will my HOA let me?" Many allow standing seam in approved colors. We help you put together what the HOA asks for: the panel profile, the color and the product sheet. Then we handle the install so the trim, ridge and eaves look like they were designed for the house. Concealed-fastener standing seam is the usual choice here because it reads clean from the street.

If metal isn't allowed or isn't in the plan, we'll show you impact-rated shingle options instead. Every shingle roof we install is Class 3 impact-rated or better, with Class 4 available.

Acreage, shops and barns around Decatur

On land out toward Boyd, Alvord and Greenwood, a common setup is standing seam on the house and R-panel or PBR on the shop and barn, in matching colors. It puts the premium roof where it shows and a tough, economical roof where it works. Our standing seam vs. R-panel guide was written for exactly this choice, and barndominium roofs covers the barndo side.

Storms near Decatur

NOAA recorded 2-inch hail at Decatur on March 26, 2017, and 3-inch hail at Boyd on April 8, 2024, about seven miles south of town. Metal won't make a roof hail-proof, and big hail can dent it. But a 26-gauge panel doesn't crack, curl or shed granules, and that's why so many Decatur owners stop re-buying shingles after the second claim. See Class 4 metal roofs and insurance.

What sets our metal work apart

  • Panels formed on our own equipment, cut to each roof plane, so there are fewer laps and less waiting.
  • 24 or 26 gauge on every standing seam and R-panel roof. See 26 vs. 29 gauge.
  • Our own crew, led by an owner with 30 years of roofing experience. In total he has completed over $80 million in roofing projects.
  • A free digital photo report before you decide anything.
  • A workmanship warranty from 10 years up to lifetime, depending on the job.
  • 24/7 emergency response for leaks and storm damage.

Colors and finishes

Charcoal, dark bronze, black and gray are the most-requested colors on Decatur homes, with galvalume and lighter tones on shops. We'll bring samples so you can see them against your brick or siding in daylight. See metal roof colors and finishes.

Next steps: visit our Decatur office page, see standing seam in Decatur, or compare metal roofing in Bridgeport and Wise County.

5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.

What goes into a metal roof replacement price in Decatur

We quote each roof after an inspection rather than posting a per-square-foot price, because these change the number:

  • Panel type: standing seam costs more than exposed-fastener R-panel or PBR.
  • Gauge: 24 or 26 gauge, chosen for the building, spans and budget.
  • Tear-off or go over: whether to remove the old roof or install over it where code and the manufacturer allow.
  • Roof shape: valleys, hips, dormers and penetrations add trim and labor.
  • Deck and framing: any rotten decking found during tear-off.
  • Underlayment and condensation control, which matter a lot on shops and barndos.

Replacement, step by step

  1. Free inspection and measurements, with photos.
  2. Written quote listing panel, gauge, color, underlayment and trim.
  3. Permit: the City of Decatur requires a re-roof permit, and we pull it before work starts.
  4. HOA approval: if you have an HOA, we handle it start to finish, including the color and product submittals and the approval paperwork.
  5. Panels formed full length on our own roll formers.
  6. Tear-off or prep, underlayment, panels, trim and flashing by our own crew.
  7. Clean-up and a final walkthrough, plus a roof certification once the roof is complete.

Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.

Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.

Request a free inspection or call (817) 733-9228. Small repairs are welcome too.

Close-up of a gray standing seam metal roof with matching painted vent stacks and pipe flashings
Standing seam detail: painted vents and pipe flashings
Green standing seam metal roof and trim over the porch of a log-look siding home
Standing seam over a covered porch

Frequently asked questions

Do you install metal roofs in Decatur, TX?

Yes. From our Decatur office we install 24- or 26-gauge standing seam formed in-house, R-panel and PBR, stone-coated steel and metal shingles on homes, shops and barns. Call (817) 733-9228.

Will my Decatur HOA allow a metal roof?

Many do, usually in approved colors and profiles. Check your HOA rules first. We can supply the panel profile, color and product information they ask for.

Should my house and shop have the same metal roof?

Not necessarily. A common choice is standing seam on the house and R-panel or PBR on the shop and barn in a matching color.

Do metal roofs dent in hail?

Very large hail can dent metal. A 24- or 26-gauge steel panel does not crack or lose granules like shingles. Ask your insurer how they handle cosmetic dents.

How long does a Decatur metal roof take?

It depends on the size and complexity of the roof. Because we form our own panels, we are not waiting on an outside panel shop. We give you a schedule in writing.

Do you offer a warranty?

Yes: a workmanship warranty from 10 years up to lifetime, depending on the job, plus the manufacturer warranty for the product, in writing.

Can a metal roof go over my old shingles?

Sometimes, where code and the manufacturer allow. We check the deck and the existing layers first and tell you whether tear-off is the better choice.

Should I choose 24 or 26 gauge?

We install both. 24 gauge is thicker and stiffer; 26 gauge suits many homes and shops. We recommend one based on your building, spans and budget.

Do you replace old R-panel shop and barn roofs?

Yes, including ones we did not install. We can re-screw, coat, re-roof over, or tear off and install new full-length panels.

How long does a metal roof replacement take?

Most residential roofs are installed in one day, depending on size and weather. We give you a schedule with your written quote.

Do you give a roof certification on a new metal roof?

Yes. We fill out a roof certification once the roof is complete.

Do I need a permit to replace my roof in Decatur?

Yes. The City of Decatur requires a re-roof permit, and we pull it for you before work starts.

Do you handle HOA approval?

Yes, start to finish. We prepare the color and product submittals and the approval paperwork for your HOA.

Get a free estimate

Tell us how to reach you. Blake or the team will call you back.

Or call (817) 733-9228