Snow Roofing & Exteriors logo Call (817) 733-9228
Commercial roofs · Specifications

Commercial Roof Specification: Owner Specs or Ours

A commercial roof specification is what makes bids comparable. Without one, three contractors can each say "TPO" and mean three very different roofs. Snow Roofing & Exteriors bids to the specification your architect or owner's team provides, and when there isn't one, we write a plain-English scope that spells out every choice so you can hold any bidder to it.
  • TPO, PVC, modified bitumen, metal and coatings
  • Repairs, restorations and new roofs
  • 10- and 20-year NDL warranties available
  • American WeatherStar Approved Contractor
Illustration of roof plan drawings, a roof section detail and membrane samples on a desk
Illustration

What a good roof spec covers

ItemWhy it matters
Tear-off or recoverDecided by core cuts and the 2021 IBC reroofing rules
Membrane and thicknesse.g. 60 vs 80 mil TPO, or PVC near kitchens; affects warranty term
Insulation and cover boardR-value, tapered insulation for drainage, hail-resistant cover board
AttachmentMechanically fastened, adhered or fleece-back; must meet wind uplift for the building
DetailsCurbs, drains, parapets, coping, edge metal, walkway pads
WarrantyManufacturer NDL term and riders, plus workmanship warranty
Testing and inspectionsPull tests, core cuts, adhesion tests, manufacturer inspection
Site rulesHours, staging, occupied-building protections, insurance certificates

If you have a spec

We bid it as written and flag anything that conflicts with the manufacturer's current requirements or the job conditions we find, before the bid date, so you're not surprised by change orders later.

If you don't

  1. We inspect, drone and core the roof. Every inspection comes with a free digital photo report, so you see what we see.
  2. We write a scope covering every item in the table above, in plain English
  3. We price it, and price alternates if you want to compare systems; see multi-option bids
  4. You can hand our scope to other bidders so every number is for the same roof

Our scope is a contractor's scope of work for bidding. When a project calls for an architect's design documents, we bid and build from those.

Under the 2021 IBC reroofing rules (Section 1512), a new roof generally can't be laid over an existing roof that is water-soaked or deteriorated, or over one that already has two or more layers. A moisture survey and a core cut tell us which applies. See pull tests and core cuts.

Systems we scope and install

SystemWhere it usually fitsWhat to watch
TPOOffices, retail, warehouses and schools with open low-slope roofsWelded seams and flashings at curbs, parapets and drains
PVCRestaurants and roofs with grease or chemical exhaustKeep grease contained; detail the kitchen curbs
Modified bitumen / built-upOlder buildings, heavy foot traffic, multi-ply redundancyLayers already on the deck; ponding
CoatingsSound roofs with dry insulationWet insulation has to come out first
MetalPitched roofs, mansards, metal buildings, retrofits over old flat roofsFastener and panel choice; one-piece runs from our roll formers

We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. Both 10-year and 20-year manufacturer NDL (no-dollar-limit) warranties are available on commercial jobs. The price depends on which term you choose, and the manufacturer issues an NDL warranty only after its own inspection. We offer same-day response in almost every case, and we answer leak and storm calls 24/7 at (817) 733-9228.

Code sections and standards are summarized in plain English from the published documents. Your building official, the manufacturer's current specification and the warranty document have the final word.

Commercial warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, plus both 10-year and 20-year NDL (no-dollar-limit) manufacturer warranties (the price depends on which NDL term you choose). Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.

Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.

Request a free inspection or call (817) 733-9228. Small repairs are welcome too.

Frequently asked questions

What should a commercial roof specification include?

Tear-off or recover, membrane and thickness, insulation and cover board, attachment, details, warranty, testing and site rules.

Will you bid to our architect's specification?

Yes. We bid it as written and flag any conflicts with current manufacturer requirements before the bid date.

We don't have a spec. Can you help?

Yes. We inspect the roof and write a plain-English scope you can hand to every bidder, so all the numbers are for the same roof.

Can we compare more than one system?

Yes. We price alternates side by side in a multi-option bid.

Which manufacturers are you certified with?

We are certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers.

Get a free estimate

Tell us how to reach you. Blake or the team will call you back.

Or call (817) 733-9228