Snow Roofing & Exteriors logo Call (817) 733-9228
Keller, TX · Pergolas & patio covers

Pergolas and Patio Covers in Keller, TX

Snow Roofing & Exteriors designs and builds pergolas, arbors and patio covers in Keller, open-slat or covered, attached or freestanding, with any roof matched to your house and tied in the way a roofer would. Keller's permit line, its impervious-coverage rule and its accessory structure limits all shape what fits on a lot, so we check them before anything is drawn. Our own crews build from start to finish. Our Rhome-area team is about 23 road miles (roughly 37 minutes) away. Call (817) 733-9228.
  • Outdoor kitchens, pool houses and pergolas
  • Roofs that match your home
  • Built by our own crews start to finish
  • Free estimate, with no pressure
Illustration of a slatted wood canopy over a pale stone outdoor kitchen with a grill and sage cabinets, beside a gravel garden
Illustration

Pergolas in Keller

Keller is on U.S. 377 about 15 miles north of Fort Worth, in northeast Tarrant County. Its roots go back to Double Springs, settled in the early 1850s, and Census estimates show about 46,000 residents today. Most of the city is single-family neighborhoods, from SF-8.4 subdivision lots (8,400 square feet and up) to SF-36 estate lots of 36,000 square feet or more on the edges of town, many under HOA architectural rules. That spread matters for a pergola: on an SF-8.4 lot with a pool there's little room to spare, while on an SF-36 lot the question is where the structure looks best from the house.

Most Keller pergola projects are one of three things: an attached cover off the back of the house over the patio or outdoor kitchen, a freestanding pergola by the pool, or a replacement for an older cedar pergola that's rotting at the post bases or sagging between the beams. On a brick house with a shingle or tile roof, a covered pergola should look like it came with the house.

Who builds pergolas in Keller?

Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:

  • 75 years as a family roofing and exterior business, and 30 years in the trade for owner Blake Snow.
  • 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
  • Snow Roofing & Exteriors is BBB A+ rated, fully insured, with references available on request.
  • Our own crews, who frame, roof, trim and finish pergolas, arbors and patio covers from start to finish.
  • One company for the whole outside of the house: roofs, gutters, siding, windows, soffit and fascia, paint, and outdoor living.
  • A workmanship warranty from 10 years up to lifetime, depending on the job, in writing.

Pergola, patio cover or pavilion: which one fits

People in Keller use these words loosely, and the city treats them differently, so it helps to pin down what you actually want before anything is drawn:

StructureWhat it doesWhat to watch
Open pergolaBeams and rafters with open slats overhead. Filtered shade, and a frame for fans, lights or climbing plants.It doesn't keep rain off. Slat spacing and direction decide how much shade you get at 5 p.m. in July.
Attached patio coverA solid roof off the back of the house over a patio or outdoor kitchen.The tie-in to the house roof or wall is the most common leak spot, and the city treats it as part of the house.
Freestanding pavilionA solid roof on its own posts, often over a kitchen, a fireplace or a seating area by the pool.Footings, wind bracing and setbacks from property lines, the house and the pool.
Louvered roofA manufactured aluminum roof with blades that open for light or close against rain.Water drains through the beams and posts, so the drainage has to be planned. We'll lay it out next to a solid roof on cost, hail and upkeep.

Many backyards end up with a mix: a solid cover over the kitchen and an open pergola over the seating, built to look like one design.

City of Keller permits for pergolas and covers

Keller's Building Services FAQ says a permit is required to build, enlarge or alter a structure, and separately for any electrical, gas, mechanical or plumbing work, swimming pools, fences, irrigation, retaining walls over 3 feet, tree removal and grading. Its exemptions include one-story detached accessory buildings of 120 square feet or less, but even those have to sit at least 5 feet from the side and rear property lines, stay out of every easement, and stay at or under 10 feet tall.

Over 120 square feet, the accessory permit goes in online (Keller moved to an online permitting system on June 17, 2024 and no longer takes paper applications). What the city's plan review page and FAQ ask for:

  • A site plan that lists the square footage of every impervious surface on the lot: the house, pool, pool deck, drive, walks, patios and the new structure.
  • A framing plan showing the size, location and spacing of rafters, ceiling joists, studs and any engineered beams.
  • An engineered foundation plan at 400 square feet or more (or over 10 feet tall), and an engineered grading plan at 500 square feet or more.
  • A notarized owner affidavit when a contractor applies for you, and an approved Final Plat on file for the property before any building permit is issued.

Keller's FAQ also notes that if new construction on an existing house, including porches and patios, pushes the total over 6,000 square feet, a fire sprinkler system has to be retrofitted in the whole house. On a large Keller house we check that number before we draw. Building permit fees come from the city's valuation-based fee schedule; they're city fees, not our price. Building Services is open Monday through Thursday and closed Fridays, so we plan inspections around that.

Keller's FAQ doesn't name pergolas or patio covers separately, and its exemption is written for one-story detached accessory buildings of 120 square feet or less. An open pergola isn't really a building, and an attached cover changes the house itself, so we ask Building Services (817-743-4110) how your exact design is classified before we draw it, rather than assume a small pergola is exempt.

Keller's limits that shape a pergola

When the city treats a pergola or pavilion as an accessory structure over 120 square feet, Keller's FAQ and its Unified Development Code (Section 8.10) set these limits:

  • The same yard setbacks as the house, never in an easement or alley, and never in front of the main building.
  • No more than two detached accessory buildings on a lot, at least 10 feet apart, with a combined area under 50 percent of the house unless a Specific Use Permit is approved. A pergola beside an existing pool house or shed can be the structure that hits that limit.
  • 15 feet maximum height unless approved by the Zoning Board of Adjustment or an SUP.
  • A size limit by zoning district before an SUP is needed. City staff reports cite 500 square feet in SF-8.4 and 1,200 square feet in SF-36; we confirm the current number for your district with Community Development.

An attached cover is part of the house, so it uses the house's setbacks, and it counts toward the house's size. Keller requires a fire sprinkler retrofit in the whole house when new construction, including porches and patios, takes the total over 6,000 square feet. On a large Keller house, that number gets checked before a cover is sized.

Impervious coverage and drainage

Keller's plan review page asks every residential site plan to list the square footage of every impervious surface: the house, the pool and its deck, the drive, walks, patios and the new structure. A solid-roof cover adds roof area to that list; an open-slat pergola over an existing patio usually adds little. On a lot that already has a big pool deck, that difference can decide whether the cover is open or solid. Whatever roof it has, we gutter it and send the water away from the patio and the foundation.

Footings and framing for Keller soil

  • Posts sit on concrete piers or footings drawn for the structure, sized for clay that swells and shrinks, not on pavers or the thin edge of a patio.
  • Keller asks for an engineered foundation plan at 400 square feet or more (or over 10 feet tall) and an engineered grading plan at 500 square feet or more, plus a framing plan showing rafter and beam sizes and spacing.
  • An attached cover is bolted into the house framing, not the brick, and flashed into the roof or wall with metal.

What makes a pergola last in North Texas

  • Footings sized for clay soil. North Texas clay swells and shrinks with the weather. Posts sit on concrete piers or footings drawn for the structure, not on pavers or a thin patio edge.
  • Connections that hold against wind. A pergola is a big frame that catches gusts from every side. Beams, rafters and posts are tied together with structural connectors and bracing so the frame can't rack or lift.
  • Wood kept off the concrete. Post bases hold the wood up off the slab so it doesn't wick water and rot at the bottom, the first place an old cedar pergola fails.
  • The right material for the look. Cedar takes stain beautifully but needs resealing. Painted wood has to be primed on every face. Steel and aluminum frames cost more up front and need far less upkeep.
  • Shade aimed at the afternoon sun. We set the rafter and slat direction for where the sun is at the hours you'll actually use the space, which in most backyards means the west side.
  • Power planned in. Fans, lights, heaters and outlets are roughed in by the right trade, under their own permits, before the ceiling or slats close it up.

Why a roofing company should build the covered part

An open pergola is carpentry. A covered one is a roof, and most patio cover problems are roof problems:

  • The tie-in. Where a cover meets the house, we flash it into the roof or the wall with metal, and we fasten the ledger to the house framing, not to brick or stone veneer. Caulk alone is how most patio covers start leaking.
  • Pitch and material. Shingles need at least a 2:12 pitch under the residential code, and clay or concrete tile needs more. When a cover is too flat for the house's roofing, standing seam in a matching color is usually the cleanest answer. We form it on our own roll formers in 24 or 26 gauge, and metal lead time is typically 1 to 2 weeks.
  • Water off the patio. Gutters and downspouts sized for the cover and tied into the house's drainage, so the cover doesn't dump water onto the patio or against the foundation.
  • Matching the house. On tile, slate, shake-look or designer shingle houses, the cover should look like it came with the house. See patio covers that match tile with standing seam.

Hail around Keller

NOAA's Storm Events Database lists 45 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Keller from 2016 through the September 2026 update. The worst day close to town was April 28, 2021, with 3.25-inch hail in Keller, about two and a half miles from the center of town, and 3-inch hail at two more spots in and near Keller the same day. The most recent big day was May 27, 2024: 2-inch hail at the Keller-area airport, with 2.75-inch hail in Bedford and Hurst. The Storm Prediction Center's 2026 reports include 1-inch hail 3 miles northwest of Keller and 1.5-inch hail 2 miles southeast of Haslet on August 26, 2026 and 1-inch hail just east-northeast of Keller on September 21, 2026.

A covered pergola in Keller takes the same hail as the main roof. We build it with the same underlayment, flashing and edge metal as a house roof, and standing seam won't crack or lose granules the way shingles do, though very large hail can dent any metal. Older Keller covers are often the first thing to leak after a storm because the tie-in to the house was sealed with caulk; when we rebuild one, that joint is the first thing we fix.

How a pergola job runs with us

  1. Site visit. We look at the back of the house, the roofline, the sun, the pool and the property lines, and talk about how you'll use the space.
  2. Design. We can bring in an architect to spec a new build, or build to plans you already have.
  3. Written scope. Size, height, materials, finish, roof type if it's covered, footings, gutters, fans and lights, in writing, with no surprises later.
  4. Approvals. Your HOA's approval first, then the permit with the City of Keller. We prepare the site plan and the drawings, including the engineering the city asks for.
  5. Build. Our own crews build it from start to finish, with the electrician scheduled around the framing.
  6. Inspections and walk-through. We call for the inspections, walk the finished structure with you and give you the workmanship warranty in writing.

More for Keller homeowners

Planning the whole backyard? See outdoor kitchens in Keller and pool houses in Keller. For the house itself: standing seam, metal roofing, siding, window replacement, exterior painting and our Keller roofing page. Nearby: pergolas in Southlake and pergolas in Colleyville.

Free in-home estimate: call (817) 733-9228 or use the estimate form below. We'll look at the whole outside of the house, tell you what the city and your HOA will want, and put the scope and price in writing.

We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers.

Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.

Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.

Request a free inspection or call (817) 733-9228. Small repairs are welcome too.

Stained-wood covered patio with cedar posts on stone column bases, attached to a two-story brick home
Stained-wood covered patio our crew built, tied into a two-story brick home
Standing seam metal roof seen from a backyard pool and spa
Standing seam over a pool and spa
Standing seam metal roof seen across a backyard pool on a brick ranch home
Standing seam seen across a backyard pool
Green standing seam metal roof and trim over the porch of a log-look siding home
Standing seam and trim over a porch
Detail of a shake-to-standing-seam metal transition
Where a shake roof meets standing seam
Gray standing seam metal roof panels running up to the ridge, with painted vent stacks
Standing seam panels and painted vents to the ridge

Frequently asked questions

Who builds pergolas in Keller, TX?

Snow Roofing & Exteriors designs and builds pergolas, arbors and patio covers in Keller, open or covered, with roofs matched to the house and tied in by roofers. It's a family roofing and exterior business going back 75 years, owner Blake Snow has 30 years in the trade, and it's BBB A+ rated, with 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. Our Rhome-area team is about 23 road miles (roughly 37 minutes) away. Call (817) 733-9228.

Do I need a permit for a pergola in Keller?

Often. Keller requires a permit to build or alter a structure, and its exemption is written for one-story detached accessory buildings of 120 square feet or less, which still have to be 5 feet from side and rear lines, out of easements and no more than 10 feet tall. An attached cover changes the house, so we confirm with Building Services how your design is classified.

How close to the fence can a pergola be in Keller?

A small exempt structure has to be at least 5 feet from the side and rear property lines and out of every easement. Over 120 square feet, it uses the same yard setbacks as the house and can’t be in front of the house.

Does a pergola count toward impervious coverage in Keller?

Keller asks every residential site plan to list the square footage of every impervious surface. A solid-roof cover adds roof area; an open-slat pergola over an existing patio usually adds little. We run the numbers before we design.

When does Keller require an engineered foundation?

Keller asks for an engineered foundation plan for accessory structures of 400 square feet or more, or over 10 feet tall, and an engineered grading plan at 500 square feet or more.

Could a patio cover trigger a fire sprinkler requirement?

On a large house, it can. Keller requires a sprinkler retrofit in the whole house when new construction, including porches and patios, takes the total over 6,000 square feet. We check that number first.

How big has hail been around Keller?

NOAA lists 3.25-inch hail in Keller on April 28, 2021, 2-inch hail at the Keller-area airport on May 27, 2024, and 45 reports of golf-ball-size or larger hail within about 10 miles since 2016.

Do I need my own architect or plans for a pergola in Keller?

No, but you can use them. We can bring in an architect to spec a new build, or build to plans you already have. Our own crews do the building from start to finish.

Cedar, painted wood, steel or aluminum: which is best?

It depends on the look and how much upkeep you want. Cedar takes stain well but needs resealing every few years. Painted wood needs good priming on every face. Steel and aluminum cost more up front and need very little upkeep. We price the options side by side.

Can you put a solid roof on a pergola later?

Sometimes, if the posts, beams and footings were sized for a roof from the start. If you think you might want a roof later, tell us at design so we can build the frame for it now.

What warranty comes with a pergola or patio cover?

Our workmanship warranty is from 10 years up to lifetime, depending on the job, in writing, plus the manufacturers’ warranties on the roofing and any manufactured components.

Get a free estimate

Tell us how to reach you. Blake or the team will call you back.

Or call (817) 733-9228