Siding on Frisco homes
Frisco sits on State Highway 289 and Farm Road 720 about 30 miles north of Dallas, mostly in Collin County with a part in Denton County, and Census estimates show about 237,000 residents. Most of its houses were built in the last 25 years in master-planned neighborhoods such as Starwood, Stonebriar, Newman Village and Phillips Creek Ranch, almost all with an HOA. The typical Frisco house is brick or stone on the first floor with siding on the gables, the upper walls and the back of the house, and that's where 20-year-old builder siding, failed caulk and hail damage show up first.
Builder siding chosen for price 20 years ago is now showing its age: swollen or delaminating wood-composite lap at the bottom of walls, cracked fiber cement at butt joints and corners, failed caulk around windows, and soft trim where water got behind it. On many streets the back of the house hasn't had a close look since the day it was built.
Who replaces siding in Frisco?
Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:
- 75 years as a family roofing and exterior business, and 30 years in the trade for owner Blake Snow.
- 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
- Snow Roofing & Exteriors is BBB A+ rated, fully insured, with references available on request.
- Our own crews, who tear off, repair, wrap, side, trim and paint.
- One company for the whole outside of the house: roofs, gutters, siding, windows, soffit and fascia, paint, and outdoor living.
- A workmanship warranty from 10 years up to lifetime, depending on the job, in writing.
City of Frisco siding permits
Frisco's building inspections FAQ says permit applications are required before any construction to modify, repair, replace, demolish or improve an existing structure, and they're filed in the city's Plans and Permits portal. Siding isn't one of the quick self-service permits; Frisco's residential permits page limits those to items such as roofs replaced with the same material, windows and doors, and minor trade work, and sends additions and alterations to electronic review. A few Frisco details:
- The city's consolidated fee schedule (effective October 1, 2026) has residential alteration lines, including general alterations ($75 plus $0.45 per square foot, up to $550) and exterior veneer ($150), plus a $50 non-refundable application fee. Which line applies depends on the scope, and we confirm it when we apply. These are city fees, not our price.
- Contractors have to be registered with the City of Frisco, and the city checks registration status in eTRAKiT, the same system used for inspections.
- Frisco adopted the 2024 International Residential Code with local amendments (Ordinance 2026-01-10, passed January 6, 2026). One of those amendments matters for siding: wood shakes and shingles are prohibited as exterior wall covering in Frisco. If you want a shake look on a gable, we'll show you fiber cement or engineered shake panels instead.
HOA approval in Frisco
Frisco's own alteration submittal requirements remind owners that some subdivisions require HOA approval. In Frisco's master-planned neighborhoods that's most of them, and committees typically review siding profile, color and trim. We prepare the submission with product data, color samples and photos of each elevation, and wait for written approval before we order.
Siding materials, in plain English
We install any kind of siding, in all major brands. Most homeowners don't know the product names, and they don't need to. What matters is how each material behaves on a North Texas wall:
| Material | What it is | Good to know |
|---|---|---|
| Vinyl | Plastic lap or panel siding with the color all the way through | Lowest upkeep and budget-friendly. Thicker panels resist cracking better; thin vinyl can crack in a hard hailstorm, especially on a cold morning. |
| Fiber cement | A rigid board made from cement and fibers, usually painted | Won't rot or burn, holds paint well, and looks like painted wood. Heavier, so it takes more care to install and cut. |
| Engineered wood | Wood fibers pressed with resins into lap boards and panels | A real wood look and lighter than fiber cement. The ends and cuts have to be sealed and painted right. |
| Metal | Steel or aluminum lap or vertical panels | Very durable, and it can match a metal roof. Large hail can dent it. |
| Stucco and stone veneer | Cement plaster or thin stone over a lath system | Common as accents on gables and entries. Repairs are about blending texture and color, not just patching. |
We'll show you samples on your own wall and give you the tradeoffs in writing, including cost, maintenance and how each one holds up to hail and heat.
Matching siding on a 20-year-old Frisco house
Many Frisco jobs are partial: one or two elevations after a hailstorm, or the gables and upper walls where the original product failed. Matching means the same exposure (the visible height of each board), the same texture and the same corner and trim details, then painting the whole elevation so old and new read as one wall. Some original builder products are no longer made; when an exact match isn't available, we show you the closest option and where replacing a full elevation would look better than a patch.
What happens under the new siding
Siding is the part you see. The part that keeps the wall dry is underneath, and that's where cheap siding jobs cut corners:
- Tear-off and look. Once the old siding is off we check the sheathing for soft spots, rot and old leaks, especially below windows and at the bottom of walls, and show you photos before anything is covered up.
- Repair the wall. Damaged sheathing is replaced, and rotted trim and fascia are fixed instead of wrapped. See soffit and fascia.
- House wrap and flashing. The weather barrier is lapped the right way, and windows and doors are flashed into it so water runs out, not in. See replacement windows.
- Siding and trim. Installed to the manufacturer's instructions, with the right clearances at the roof line, grade and flatwork.
- Paint and clean-up. Painted siding gets exterior paint once the walls and trim are done, then a final walkthrough.
Siding and a new roof, on one schedule
The roof edge, drip edge, soffit, fascia, gutters and the top course of siding all meet at the same line. When one company does them together, colors are picked in one meeting, the flashing is tied in once, and nobody has to come back and pull off the other crew's work. Our own crews build everything, so you have one schedule and one person to call.
Hail around Frisco
NOAA's Storm Events Database lists 69 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Frisco from 2016 through the September 2026 update, one of the highest counts of any town we serve. The largest was 4.5-inch hail near Allen on March 24, 2019. On June 11, 2023, 3.5-inch hail fell near Carney, about two miles from Frisco, and this year the list includes 2-inch hail near Carney on June 2, 2026, about three and a half miles away.
Hail-damaged siding in Frisco
Hail cracks fiber cement, splits vinyl, dents metal and knocks paint off wood, often only on the side the storm came from. We document siding damage together with the roof, gutters and windows, and we'll tell you honestly whether a repair can be blended or the elevation needs replacing. Read replace or repair hail-damaged siding. If you file an insurance claim, we document the damage with photos and meet your adjuster. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file a claim; check your policy.
Photos
The photos below show siding replacement work by our crews, before, during and after. We never show a street or address.
More for Frisco homeowners
More in Frisco: exterior painting in Frisco, window replacement in Frisco, metal roofing, tile roofing, outdoor kitchens and our Frisco roofing page. Nearby: siding in Little Elm.
We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers.
Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.






