A suburb that grew up in fifteen years
Coppell is in the far northwest corner of Dallas County, bordered by Irving, Grapevine and Carrollton and just northeast of DFW Airport, with Grapevine Creek, Denton Creek and Cottonwood Branch running through it. It began as Gibbs Station on the railroad in the 1880s and took the Coppell name in 1892. It stayed tiny for a long time (666 people in 1960) and then grew fast: about 3,800 residents in 1984, 16,881 in 1990 and nearly 36,000 by 2000, according to the Handbook of Texas. Census estimates show about 41,400 residents today.
With the population jumping more than ninefold between 1984 and 2000, a big share of Coppell's homes date from that stretch: planned neighborhoods, lots of two-story brick and stone homes, and more complex roofs than older suburbs. Many of those roofs have already been replaced at least once after hail. When owners here ask about metal, the question is which metal fits the house and the HOA:
| Property | What we usually recommend |
|---|---|
| Two-story brick or stone home with an HOA | Stone-coated steel or metal shingles that read as shingle or shake from the curb |
| Home with porches, bays and a front entry roof | A Class 4 or designer shingle main roof with standing seam accents |
| Modern, transitional or farmhouse-style home | A full standing seam roof, usually charcoal, black or dark bronze |
| Traditional home with a copper look in mind | Copper accents over bays, entries and dormers |
| Detached garage, workshop or pool cabana | R-panel or PBR, or standing seam to match the house |
Every kind of metal roof, not just one
Most "metal roofing" searches in Coppell start with standing seam, but it isn't the only right answer. Here's what we install and where each one fits:
| Metal system | What it looks like | Where it fits best |
|---|---|---|
| Standing seam | Flat pans with raised seams, fasteners hidden | Full roofs on modern, farmhouse and transitional homes; porch and bay accents |
| Stone-coated steel | Steel with a stone granule finish shaped like shake, tile or shingle | Owners who want metal's strength but a traditional look a neighborhood is used to |
| Metal shingles and metal tile | Pressed steel panels in shingle, slate or tile profiles | Homes where the street view has to read as shingle, slate or tile |
| Copper accents | Bright copper that weathers to brown, then green | Bay windows, entry roofs, dormers and cupolas on traditional homes |
| R-panel, PBR and corrugated | Ribbed panels with exposed screws and washers | Shops, barns, garages, pool cabanas, boat and RV covers |
We don't quote prices on the web because pitch, size, tear-off and detail work move them too much. We'll give you a written number for each option that makes sense on your roof.
Complex roofs need more than panels
Two-story homes like Coppell's tend to have a lot of hips, valleys, dormers and wall intersections. That's where a metal roof is won or lost. Every one of those details gets flashing bent for the panel on our brake, not caulk; valleys get a full-length valley pan; chimneys get the cricket the City's final inspection looks for; and walls get counterflashing that lets the panel move with the heat. We draw those details into the written spec so you can see what you're paying for.
Wind next to the airport
Coppell sits right beside DFW Airport, where the official weather station records the area's wind. From NOAA's narratives:
- August 4, 2025: the airport's station measured an 89 mph gust, about five miles from the center of Coppell.
- May 28, 2024: the airport measured 77 mph, and winds were estimated at 80 mph in Valley Ranch, about three miles southeast.
- December 13, 2022: a brief EF-1 tornado damaged the roof of Grapevine Mills mall, about three miles away, then damaged roofs at an apartment complex to the north.
- January 10, 2020: an EF-0 tornado caused roof damage along the edge of the Hackberry Creek neighborhood in Irving and to a grocery store nearby.
- June 9, 2019: a trained spotter reported a 60 mph gust about a mile south of Coppell.
Metal fails at its edges and fasteners, not in the middle of the panel. Next to an airport that has measured gusts up to 89 mph, we use:
- Tighter clip and fastener spacing at the perimeter (eaves, rakes, hips and ridge), where uplift is highest, following the manufacturer's tested pattern.
- Trim made for the panel, hemmed and cleated, instead of face-screwed loose trim that wind can catch.
- Deck and nailing checked after tear-off, because a metal roof is only as well attached as the wood under it.
- Closures sized to the panel at the ridge and eaves so wind-driven rain stays out.
Hail around Coppell
NOAA's Storm Events Database lists 25 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Coppell from 2016 through the September 2026 update. The ones that matter most:
- June 6, 2018: 2.75-inch hail less than a mile from the center of Coppell and 3-inch hail about two miles away, both filed under Coppell, with 3-inch hail in Carrollton the same day.
- June 11, 2023: 4-inch hail near Grapevine Lake, about seven miles northwest, the largest in the area, and 3-inch hail near Lewisville.
- March 14, 2024: 3.5-inch hail near Bartonville, about nine miles north.
- May 22, 2024: 1.75-inch hail about five miles north near Lewisville.
- Smaller 1-inch hail fell inside Coppell in 2016, 2019, 2021 and 2022, the kind that bruises older shingles without anyone noticing from the yard.
Metal isn't hail-proof. Very large hail can dent steel, and some policies treat cosmetic dents differently from leaks, so read the policy before you choose. A 24- or 26-gauge panel won't crack, curl or shed granules the way shingles do. See Class 4 metal roofs and insurance. Texas insurers must offer a premium credit for UL 2218 impact-rated roofs, but each company sets its own amount, and Class 4 earns the largest. We can't promise a discount; ask your insurer for their figure in writing. After a qualifying install we fill out TDI Form PC068 for you. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.
City of Coppell roof permit
Coppell requires a permit for every roof replacement. The City's roofing permits handout says a building permit and inspection are required to replace or recover any roof, residential or commercial, and that the permit makes sure the contractor is registered and insured. The details:
- Permit type BUILDING (RESIDENTIAL), work class ROOF, $100 for residential roofing (a City fee, not our price), applied for online in the City's Civic Access portal. A change in materials, or replaced sheathing, goes in the description.
- Registered and insured. Every contractor working in Coppell registers with the City, and the registration runs one year from the application date.
- Old layers off. The handout says existing layers must be removed down to the deck.
- The 100-square-foot sheathing rule. If more than an aggregate of 100 square feet of sheathing has to be replaced, the handout says all of the roof sheathing must be replaced and brought up to current code. That can change the scope of a job, so we check the deck carefully and tell you before tear-off what happens if we hit that line.
- A final inspection, in person or by remote video. The inspector checks the attic (gas vent clearances, plumbing vents, decking, attic vents) and, from the ground, the vent caps, pipe boots, flashing, drip edge, chimney crickets and site cleanup.
The City also notes that its inspectors don't evaluate existing roofs; that's what our inspection and photo report are for. Questions about a specific address go to Coppell Building Inspections at 972-304-3500.
For a metal roof, the tear-off rule and the sheathing rule work in your favor: the old layers come off, the deck gets a real look, and any replacement sheathing meets current code before the panels go on. We note the change in materials (shingle to metal) in the permit description, as the City asks.
Getting metal past an HOA in Coppell
Many neighborhoods in Coppell have an HOA, and committees mostly care about how the roof reads from the street and whether the color fits the neighborhood. Stone-coated steel and metal shingles read as shake, shingle or tile from the curb; standing seam is often approved first on porches, bays and entries. We put together the product sheet, color chip, profile drawing and impact rating so the committee can decide on the first pass. Approval is always up to your HOA.
Garages, cabanas and outbuildings
We re-panel and re-roof detached garages, workshops and pool cabanas in R-panel, PBR or standing seam, color-matched to the house. Our crews also handle siding, gutters and windows, so one crew can finish the whole exterior.
Why it matters that we form our own panels
- One piece from eave to ridge. We cut standing seam and R-panel to the length of each roof plane, so long runs don't need mid-slope laps.
- 24 or 26 gauge on every standing seam and R-panel roof. See 26 vs. 29 gauge.
- No waiting in a panel shop's queue after a hailstorm, when everyone needs a roof at once. Metal lead time is typically 1 to 2 weeks.
- Flashings bent for the panel, not caulked: walls, chimneys, valleys, skylights and pipes.
- Every inspection comes with a free digital photo report, so you see what we see.
How a metal roof job runs with us
- Inspection and free digital photo report: deck, ventilation, penetrations, valleys and measurements.
- Written spec for each option: system, gauge, profile, color, underlayment, trim and every flashing detail.
- Approvals: the HOA or historic-review packet if you need one, then the permit.
- Tear-off and deck repair where needed, then high-temperature synthetic underlayment made for metal.
- Install by our own crew, with hips, ridges, eaves and penetrations detailed for the system.
- Final walk-through, a magnet sweep of the yard and driveway, and your warranty in writing.
Who installs metal roofs in Coppell?
Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:
- 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
- Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
- 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
- Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
- Our own crew, about 35 road miles (roughly 50 minutes) from Coppell with our Rhome-area team.
- Snow Roofing & Exteriors is BBB A+ rated.
Our metal work, up close
The photos on this page show our roof work up close. We never show a street or address.
We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. We give a workmanship warranty from 10 years up to lifetime, depending on the job, and the manufacturer warranty on the panel and finish, in writing.
More in Coppell: metal roofing in Coppell, standing seam in Coppell, storm damage in Coppell and our Coppell roofing page. Nearby: metal roofing in Carrollton, Irving, standing seam in Grapevine and metal roofing in Lewisville.
Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.
Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.








