Snow Roofing & Exteriors logo Call (817) 733-9228
Coppell, TX · Standing seam metal

Standing Seam Metal Roofing in Coppell, TX

Standing seam metal roofing in Coppell, TX means one panel from eave to ridge, hidden fasteners, and a roof built for the gusts DFW Airport measures next door. Snow Roofing & Exteriors forms 24- or 26-gauge standing seam on our own roll formers, cut to each roof plane, and our own crew installs it on full roofs, porch and bay accents and patio covers. Our Rhome-area team is about 35 road miles (roughly 50 minutes) away. Call (817) 733-9228.
  • Hidden screws and clean, straight lines
  • Formed on our own roll formers, right on the job
  • 24 or 26 gauge steel in many colors
  • Workmanship warranty from 10 years up to lifetime, depending on the job
Illustration of a modern farmhouse with a bronze standing seam metal roof

Where standing seam fits in Coppell

Coppell is in the far northwest corner of Dallas County, bordered by Irving, Grapevine and Carrollton and just northeast of DFW Airport, with Grapevine Creek, Denton Creek and Cottonwood Branch running through it. It began as Gibbs Station on the railroad in the 1880s and took the Coppell name in 1892. It stayed tiny for a long time (666 people in 1960) and then grew fast: about 3,800 residents in 1984, 16,881 in 1990 and nearly 36,000 by 2000, according to the Handbook of Texas. Census estimates show about 41,400 residents today.

Standing seam shows up on Coppell homes in a few ways:

  • Accents over porches, bays and entries with a designer or Class 4 shingle main roof, the most common way metal gets onto an HOA street.
  • Full roofs on modern and transitional remodels, usually in charcoal, black or dark bronze.
  • Full roofs on brick and stone two-stories where the owner is done with hail claims and the HOA approves it.
  • Patio covers and porch roofs over outdoor living space and pools.

Comparing standing seam with stone-coated steel or metal shingles? See metal roofing in Coppell.

Snap-lock or mechanically seamed?

Snap-lockMechanically seamed
How the seam closesPanels snap together by handA seaming tool folds the seam closed along its length
Best onMost steep-slope house roofsLow-slope porches and wings, and very long runs
Look from the streetClean, slim seamSlightly heavier seam; same concealed fasteners

More detail: snap-lock vs. mechanical lock. We use 24 or 26 gauge steel and never 29 gauge on a home (why). We don't publish prices because size, pitch, tear-off and detail work move them too much; our standing seam cost page explains what moves the number, and you get a written price for your roof.

Built for an 89 mph gust

The weather station at DFW Airport, about five miles from the center of Coppell, measured an 89 mph gust on August 4, 2025 and 77 mph on May 28, 2024, and a brief EF-1 tornado damaged the roof of Grapevine Mills in December 2022. Standing seam handles that kind of wind well when it's installed to the manufacturer's tested system. What we do on every Coppell roof:

  • Clip spacing tightened at the perimeter. Uplift is highest at the eaves, rakes, hips and ridge, so that's where the clips go closer together, per the manufacturer's pattern.
  • Hemmed panel ends and cleated trim, so there's no raw edge or loose flange for wind to get under.
  • Mechanically seamed panels on low-pitch porches and wings, and where the exposure calls for the extra seam strength.
  • Deck nailing checked after tear-off, and sheathing replaced to current code where the City's 100-square-foot rule applies.

Accents done right on a two-story

An accent roof is small, but it has more transitions per square foot than any other roof on the house. On a two-story that usually means a porch roof dying into a brick or stone wall under a second-floor window. We bend the counterflashing for the panel, lap the main roof over the head of the accent so water sheds onto the metal, keep the panel clear of the window sill, and use mechanically seamed panels on a low porch. For a new standing seam patio cover, we tie into the house framing, not the veneer, and confirm the permit with Coppell Building Inspections before we build.

Color, finish and the street view

Charcoal, black and dark bronze are the colors we're asked about most on brick and stone homes; lighter grays and weathered tones blend with lighter stone and run cooler. We bring real panel samples, put the exact color and finish system in writing, and include the profile drawing and product sheet in your HOA packet. See metal roof colors and finishes. Approval is up to your HOA.

What a good standing seam job looks like up close

  • One panel from eave to ridge, formed to the length of each roof plane.
  • Clips that let the panels move with the heat, so they don't oil-can or pull fasteners.
  • Bent flashings, not caulk, at walls, chimneys, valleys, skylights and pipes.
  • High-temperature underlayment made for metal, over a deck we've checked and repaired.
  • Gas and plumbing vents reconnected, capped and flashed, with drip edge at eaves and rakes, which the City's final inspection checks.

City of Coppell roof permit

Coppell requires a permit for every roof replacement. The City's roofing permits handout says a building permit and inspection are required to replace or recover any roof, residential or commercial, and that the permit makes sure the contractor is registered and insured. The details:

  • Permit type BUILDING (RESIDENTIAL), work class ROOF, $100 for residential roofing (a City fee, not our price), applied for online in the City's Civic Access portal. A change in materials, or replaced sheathing, goes in the description.
  • Registered and insured. Every contractor working in Coppell registers with the City, and the registration runs one year from the application date.
  • Old layers off. The handout says existing layers must be removed down to the deck.
  • The 100-square-foot sheathing rule. If more than an aggregate of 100 square feet of sheathing has to be replaced, the handout says all of the roof sheathing must be replaced and brought up to current code. That can change the scope of a job, so we check the deck carefully and tell you before tear-off what happens if we hit that line.
  • A final inspection, in person or by remote video. The inspector checks the attic (gas vent clearances, plumbing vents, decking, attic vents) and, from the ground, the vent caps, pipe boots, flashing, drip edge, chimney crickets and site cleanup.

The City also notes that its inspectors don't evaluate existing roofs; that's what our inspection and photo report are for. Questions about a specific address go to Coppell Building Inspections at 972-304-3500.

Hail and standing seam in Coppell

NOAA's Storm Events Database lists 25 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Coppell from 2016 through the September 2026 update. The ones that matter most:

  • June 6, 2018: 2.75-inch hail less than a mile from the center of Coppell and 3-inch hail about two miles away, both filed under Coppell, with 3-inch hail in Carrollton the same day.
  • June 11, 2023: 4-inch hail near Grapevine Lake, about seven miles northwest, the largest in the area, and 3-inch hail near Lewisville.
  • March 14, 2024: 3.5-inch hail near Bartonville, about nine miles north.
  • May 22, 2024: 1.75-inch hail about five miles north near Lewisville.
  • Smaller 1-inch hail fell inside Coppell in 2016, 2019, 2021 and 2022, the kind that bruises older shingles without anyone noticing from the yard.

No roof is hail-proof, and 4-inch hail can dent steel. Standing seam doesn't crack, curl or lose granules, so it usually keeps shedding water after storms that ruin shingles. If you'd rather keep a shingle look on the main roof, we'll compare Class 4 designer shingles with full metal. See Class 4 metal roofs and insurance. Texas insurers must offer a premium credit for UL 2218 impact-rated roofs, but each company sets its own amount, and Class 4 earns the largest. We can't promise a discount; ask your insurer for their figure in writing. After a qualifying install we fill out TDI Form PC068 for you. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.

Why it matters that we form our own panels

  • One piece from eave to ridge. We cut standing seam and R-panel to the length of each roof plane, so long runs don't need mid-slope laps.
  • 24 or 26 gauge on every standing seam and R-panel roof. See 26 vs. 29 gauge.
  • No waiting in a panel shop's queue after a hailstorm, when everyone needs a roof at once. Metal lead time is typically 1 to 2 weeks.
  • Flashings bent for the panel, not caulked: walls, chimneys, valleys, skylights and pipes.
  • Every inspection comes with a free digital photo report, so you see what we see.

How a metal roof job runs with us

  1. Inspection and free digital photo report: deck, ventilation, penetrations, valleys and measurements.
  2. Written spec for each option: system, gauge, profile, color, underlayment, trim and every flashing detail.
  3. Approvals: the HOA or historic-review packet if you need one, then the permit.
  4. Tear-off and deck repair where needed, then high-temperature synthetic underlayment made for metal.
  5. Install by our own crew, with hips, ridges, eaves and penetrations detailed for the system.
  6. Final walk-through, a magnet sweep of the yard and driveway, and your warranty in writing.

Who installs standing seam roofs in Coppell?

Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:

  • 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
  • Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
  • 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
  • Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
  • Our own crew, about 35 road miles (roughly 50 minutes) from Coppell with our Rhome-area team.
  • Snow Roofing & Exteriors is BBB A+ rated.

Our metal work, up close

The photos on this page show our roof work up close. We never show a street or address.

We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. We give a workmanship warranty from 10 years up to lifetime, depending on the job, and the manufacturer warranty on the panel and finish, in writing.

More in Coppell: metal roofing in Coppell, standing seam in Coppell, storm damage in Coppell and our Coppell roofing page. Nearby: metal roofing in Carrollton, Irving, standing seam in Grapevine and metal roofing in Lewisville.

Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.

Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.

Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.

Request a free inspection or call (817) 733-9228. Small repairs are welcome too.

Red brick ranch home with a new dark standing seam metal roof, seen from the front yard
Brick ranch after a shingle-to-standing-seam conversion
Aerial view of a composite shake roof with standing seam metal sections, installed by Snow Roofing & Exteriors
Drone view: composite shake with standing seam sections
Old asphalt shingles next to new standing seam metal panels during a roof conversion
Old shingles beside new standing seam
Gray standing seam metal roof panels running up to the ridge, with painted vent stacks
Standing seam panels and painted vents to the ridge
Standing seam metal roof seen from a backyard pool and spa
Standing seam over a pool and spa
Green standing seam metal roof and trim over the porch of a log-look siding home
Green standing seam and trim over a porch
Standing seam metal roof and gable on a tan brick ranch home
Finished standing seam gable
Roofer finishing standing seam panels at a hip on a brick garage
Finishing standing seam at a garage hip

Frequently asked questions

Who installs standing seam roofs in Coppell?

Snow Roofing & Exteriors installs 24- and 26-gauge standing seam roofs, accents and patio covers in Coppell, formed on its own roll formers. It is a family roofing business that goes back 75 years, owner Blake Snow has 30 years in the business, the company has completed over $80 million in roofing projects, it is BBB A+ rated, and it has 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. Standing seam and R-panel are formed on its own roll formers in 24 or 26 gauge. Its Rhome-area team is about 35 road miles (roughly 50 minutes) away. Call (817) 733-9228.

Do I need a permit for a standing seam roof in Coppell?

Yes. Coppell requires a permit and final inspection for every roof replacement; the residential roofing fee is $100, and the contractor must be registered with the City and insured. A change from shingles to metal goes in the permit description.

How do you keep standing seam on in high wind?

By following the manufacturer's tested clip pattern, with tighter spacing at the eaves, rakes, hips and ridge, hemmed panel ends, cleated trim and a deck we've checked. DFW Airport, about five miles away, measured an 89 mph gust on August 4, 2025.

Can standing seam go over my old shingles?

Not in Coppell. The City's roofing handout says existing layers must be removed down to the deck. We tear off, repair the deck and lay high-temperature underlayment made for metal.

Will hail ruin a standing seam roof?

Very large hail can dent it, but steel doesn't crack, curl or lose granules, so it usually keeps shedding water. NOAA lists 2.75-inch hail less than a mile from the center of Coppell on June 6, 2018.

Will my HOA approve standing seam?

Many HOAs approve standing seam on porches, bays and entries first, and some approve full roofs. We prepare the product sheet, color chip and profile drawing. Approval is up to your HOA.

Snap-lock or mechanically seamed: which do I need?

Snap-lock suits most steep house roofs. Mechanically seamed panels are better for low-slope porches and wings and very long runs. We spec the right one for each roof plane.

Will hail dent a standing seam roof?

Very large hail can dent any metal roof. Steel doesn’t crack, curl or lose granules like shingles, so it usually keeps shedding water. Ask your insurer how your policy treats cosmetic dents.

What gauge metal do you install?

24 or 26 gauge steel on every standing seam and R-panel roof. We don’t install 29 gauge on homes.

How soon can a metal roof start?

Metal lead time is typically 1 to 2 weeks, because we form standing seam and R-panel on our own roll formers. HOA approval and the permit can add time, so we start that paperwork right after you sign.

What warranty do you give on a metal roof?

A workmanship warranty from 10 years up to lifetime, depending on the job, plus the manufacturer warranty on the panel and finish, in writing.

Get a free estimate

Tell us how to reach you. Blake or the team will call you back.

Or call (817) 733-9228 snowexteriors@gmail.com