Snow Roofing & Exteriors logo Call (817) 733-9228
The Colony, TX · Standing seam metal

Standing Seam Metal Roofing in The Colony, TX

Standing seam metal roofing in The Colony, TX means one panel from eave to ridge, hidden fasteners, and edges built for the wind that comes across Lewisville Lake. Snow Roofing & Exteriors forms 24- or 26-gauge standing seam on our own roll formers, cut to each roof plane, and our own crew installs it on full roofs, porch and bay accents and patio covers. Our Rhome-area team is about 46 road miles (roughly 62 minutes) away. Call (817) 733-9228.
  • Hidden screws and clean, straight lines
  • Formed on our own roll formers, right on the job
  • 24 or 26 gauge steel in many colors
  • Workmanship warranty from 10 years up to lifetime, depending on the job
Illustration of a modern farmhouse with a bronze standing seam metal roof

Where standing seam fits in The Colony

The Colony was built mostly by one builder starting in the 1970s, then filled in with newer neighborhoods along the lake and Highway 121. Standing seam shows up here in a few ways:

  • Full roofs on original brick homes that are on their third shingle roof and done with hail claims. A dark standing seam roof over red or tan brick is the most common conversion we're asked about.
  • Accents over porches, bays and entries with a designer or Class 4 shingle main roof, the usual answer where an HOA limits full metal.
  • Homes near the water, where hidden fasteners and no granules hold up well when the edges are detailed for the exposure.
  • Patio covers and porch roofs over outdoor living space.

Comparing standing seam with stone-coated steel or metal shingles? See metal roofing in The Colony.

Snap-lock or mechanically seamed?

Snap-lockMechanically seamed
How the seam closesPanels snap together by handA seaming tool folds the seam closed along its length
Best onMost steep-slope house roofsLow-slope porches and wings, and very long runs
Look from the streetClean, slim seamSlightly heavier seam; same concealed fasteners

More detail: snap-lock vs. mechanical lock. We use 24 or 26 gauge steel and never 29 gauge on a home (why). We don't publish prices because size, pitch, tear-off and detail work move them too much; our standing seam cost page explains what moves the number, and you get a written price for your roof.

Built for a 95 mph gust

NOAA lists a 95 mph gust measured on a ham radio tower weather station in The Colony on May 28, 2024, an 83 mph gust at Pier 121 the same day, and winds estimated up to 90 mph that peeled metal roofing off rows of boat docks on the southeast corner of the lake in March 2023. Standing seam handles that kind of wind well when it's installed to the manufacturer's tested system, and poorly when it isn't. What we do on every Colony roof:

  • Clip spacing tightened at the perimeter. Uplift is highest at the eaves, rakes, hips and ridge, so that's where the clips go closer together, per the manufacturer's pattern.
  • Hemmed panel ends and cleated trim, so there's no raw edge or loose flange for wind to get under.
  • Mechanically seamed panels on low-pitch porches and wings, and where the exposure calls for the extra seam strength.
  • Deck nailing checked after tear-off, because the clips can only hold as well as the wood they're screwed into.

Color, finish and the street view

On The Colony's brick homes, charcoal, black and dark bronze are the colors we're asked about most; lighter grays and tans blend with stone and run cooler in summer. We bring real panel samples, put the exact color and finish system in writing, and include the profile drawing and product sheet in your HOA packet if you have one. See metal roof colors and finishes. Approval is up to your HOA.

Accents and patio covers done right

An accent roof is small, but it has more transitions per square foot than any other roof on the house. We bend flashings for the panel, lap the main roof over the head of the accent so water sheds onto the metal, and use mechanically seamed panels on a low porch or bay. For a new standing seam patio cover, we tie into the house framing, not brick veneer, and confirm the permit with the City's building inspections office (972-625-1756) before we build.

What a good standing seam job looks like up close

  • One panel from eave to ridge, formed to the length of each roof plane.
  • Clips that let the panels move with the heat, so they don't oil-can or pull fasteners.
  • Bent flashings, not caulk, at walls, chimneys, valleys, skylights and pipes.
  • High-temperature underlayment made for metal, over a deck we've checked and repaired, photographed for the City.
  • Vent piping and flues reconnected and flashed, which the City's final inspection checks from the attic.

City of The Colony roof permit (required since October 1, 2025)

The City's building inspections page says that as of October 1, 2025, The Colony requires a permit for roof replacement, and for siding replacement and foundation repair too. The City adopted the 2024 International codes effective July 17, 2025. Its FY 2026 fee schedule lists re-roofing a single-family home at $75 (a City fee, not our price), and work done without a permit pays double. From the City's residential re-roof requirements:

  • A permit for sheathing and/or roof replacement, pulled by a contractor registered with the City. The contractor registration is $75 a year, and permits aren't issued if it isn't current.
  • Tear-off first. Under IRC R908 as the City lists it, the previous roof covering has to be removed before the new one is applied, and rotten decking or rafters are replaced.
  • Underlayment photos. Pictures of the installed underlayment on all sides, lapped properly, can be submitted online.
  • A final that includes the attic, to check vent piping through the roof, rafters and the water heater and furnace flues. A homeowner can choose a notarized waiver instead of the final inspection.

Questions about a specific address go to the City's building inspections office at 972-625-1756. We register, file, take the photos and schedule the final.

Hail and standing seam in The Colony

NOAA's Storm Events Database lists 60 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of The Colony from 2016 through the September 2026 update, one of the highest counts of any town we serve. NOAA files most reports inside the city under "Carney." The big ones:

  • June 11, 2023: 3-inch hail about three miles from the center of The Colony, 3.5-inch hail about five miles northeast and 3-inch hail near Lewisville, with 1.25-inch hail right in the middle of town.
  • April 13, 2019: 2.75-inch hail about a mile and a half from the center of the city.
  • June 6, 2018: 2.75-inch hail near Hebron about four and a half miles south, and 1.25-inch hail under a mile from the center of town.
  • March 14, 2024: 2.5-inch hail near Navo, about six miles north across the lake.
  • June 2, 2026: 2-inch hail about three miles away, the most recent golf-ball-size report.

No roof is hail-proof, and very large hail can dent steel. Standing seam doesn't crack, curl or lose granules, so it usually keeps shedding water after storms that ruin shingles. If you'd rather keep a shingle look on the main roof, we'll compare Class 4 designer shingles with full metal. See Class 4 metal roofs and insurance. Texas insurers must offer a premium credit for UL 2218 impact-rated roofs, but each company sets its own amount, and Class 4 earns the largest. We can't promise a discount; ask your insurer for their figure in writing. After a qualifying install we fill out TDI Form PC068 for you. If you file an insurance claim, we document the damage and meet your adjuster on the roof. Texas law requires you to pay your deductible, and a contractor may not waive, absorb or rebate it. We never will. In Texas you generally have 1 year from the date of loss to file; check your policy.

Why it matters that we form our own panels

  • One piece from eave to ridge. We cut standing seam and R-panel to the length of each roof plane, so long runs don't need mid-slope laps.
  • 24 or 26 gauge on every standing seam and R-panel roof. See 26 vs. 29 gauge.
  • No waiting in a panel shop's queue after a hailstorm, when everyone needs a roof at once. Metal lead time is typically 1 to 2 weeks.
  • Flashings bent for the panel, not caulked: walls, chimneys, valleys, skylights and pipes.
  • Every inspection comes with a free digital photo report, so you see what we see.

How a metal roof job runs with us

  1. Inspection and free digital photo report: deck, ventilation, penetrations, valleys and measurements.
  2. Written spec for each option: system, gauge, profile, color, underlayment, trim and every flashing detail.
  3. Approvals: the HOA or historic-review packet if you need one, then the permit.
  4. Tear-off and deck repair where needed, then high-temperature synthetic underlayment made for metal.
  5. Install by our own crew, with hips, ridges, eaves and penetrations detailed for the system.
  6. Final walk-through, a magnet sweep of the yard and driveway, and your warranty in writing.

Who installs standing seam roofs in The Colony?

Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:

  • 75 years as a family roofing business, and 30 years in the business for owner Blake Snow, who is still on the roofs.
  • Over $80 million in completed roofing projects, from small repairs to multi-million-dollar jobs.
  • 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
  • Our own roll formers for standing seam and R-panel, in 24 or 26 gauge, with metal lead times that are typically 1 to 2 weeks.
  • Our own crew, about 46 road miles (roughly 62 minutes) from The Colony with our Rhome-area team.
  • Snow Roofing & Exteriors is BBB A+ rated.

Our metal work, up close

The photos on this page show our roof work up close. We never show a street or address.

We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. We give a workmanship warranty from 10 years up to lifetime, depending on the job, and the manufacturer warranty on the panel and finish, in writing. More: metal roofing in The Colony, storm damage in The Colony, our The Colony roofing page, and nearby standing seam in Little Elm, standing seam in Lewisville and standing seam in Frisco.

Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.

Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.

Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.

Request a free inspection or call (817) 733-9228. Small repairs are welcome too.

Red brick ranch home with a new dark standing seam metal roof, seen from the front yard
Brick ranch after a shingle-to-standing-seam conversion
Aerial view of a composite shake roof with standing seam metal sections, installed by Snow Roofing & Exteriors
Drone view: composite shake with standing seam sections
Old asphalt shingles next to new standing seam metal panels during a roof conversion
Old shingles beside new standing seam
Gray standing seam metal roof panels running up to the ridge, with painted vent stacks
Standing seam panels and painted vents to the ridge
Standing seam metal roof seen from a backyard pool and spa
Standing seam over a pool and spa
Green standing seam metal roof and trim over the porch of a log-look siding home
Green standing seam and trim over a porch
Standing seam metal roof and gable on a tan brick ranch home
Finished standing seam gable
Roofer finishing standing seam panels at a hip on a brick garage
Finishing standing seam at a garage hip

Frequently asked questions

Who installs standing seam roofs in The Colony?

Snow Roofing & Exteriors installs 24- and 26-gauge standing seam roofs, accents and patio covers in The Colony, formed on its own roll formers. It is a family roofing business that goes back 75 years, owner Blake Snow has 30 years in the business, the company has completed over $80 million in roofing projects, it is BBB A+ rated, and it has 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. Standing seam and R-panel are formed on its own roll formers in 24 or 26 gauge. Its Rhome-area team is about 46 road miles (roughly 62 minutes) away. Call (817) 733-9228.

Do I need a permit for a standing seam roof in The Colony?

Yes. The Colony has required a permit for roof replacement since October 1, 2025. The contractor must be registered with the City ($75 a year), and the FY 2026 fee schedule lists single-family re-roofing at $75.

How do you keep standing seam on in high wind?

By following the manufacturer’s tested clip pattern, with tighter spacing at the eaves, rakes, hips and ridge, hemmed panel ends, cleated trim and a deck we’ve checked. NOAA lists a 95 mph gust measured in The Colony on May 28, 2024, so the edges get the most attention.

Can standing seam go over my old shingles?

Not in The Colony. The City’s re-roof requirements say the previous covering must be removed before the new roof goes on, and rotten decking replaced. We tear off, repair and photograph the underlayment for the City.

Will hail ruin a standing seam roof?

Very large hail can dent it, but steel doesn’t crack, curl or lose granules, so it usually keeps shedding water. NOAA lists 2.75-inch hail about a mile and a half from the center of The Colony on April 13, 2019.

What colors work on brick homes in The Colony?

Charcoal, black and dark bronze are the most requested over red and tan brick; lighter grays and tans blend with stone and run cooler. We bring real samples and put the finish system in writing.

Snap-lock or mechanically seamed: which do I need?

Snap-lock suits most steep house roofs. Mechanically seamed panels are better for low-slope porches and wings and very long runs. We spec the right one for each roof plane.

Will hail dent a standing seam roof?

Very large hail can dent any metal roof. Steel doesn’t crack, curl or lose granules like shingles, so it usually keeps shedding water. Ask your insurer how your policy treats cosmetic dents.

What gauge metal do you install?

24 or 26 gauge steel on every standing seam and R-panel roof. We don’t install 29 gauge on homes.

How soon can a metal roof start?

Metal lead time is typically 1 to 2 weeks, because we form standing seam and R-panel on our own roll formers. HOA approval and the permit can add time, so we start that paperwork right after you sign.

What warranty do you give on a metal roof?

A workmanship warranty from 10 years up to lifetime, depending on the job, plus the manufacturer warranty on the panel and finish, in writing.

Get a free estimate

Tell us how to reach you. Blake or the team will call you back.

Or call (817) 733-9228 snowexteriors@gmail.com