Snow Roofing & Exteriors logo Call (817) 733-9228
Frisco, TX · Pergolas & patio covers

Pergolas and Patio Covers in Frisco, TX

Snow Roofing & Exteriors designs and builds pergolas, arbors and patio covers in Frisco, open-slat or covered, attached or freestanding, with any roof matched to your house and tied in the way a roofer would. Frisco requires a permit for every accessory structure and treats an open arbor very differently from a solid roof, so we sort that out before anything is drawn. Our own crews build from start to finish. Our Rhome-area team is about 45 road miles (roughly 68 minutes) away. Call (817) 733-9228.
  • Outdoor kitchens, pool houses and pergolas
  • Roofs that match your home
  • Built by our own crews start to finish
  • Free estimate, with no pressure
Illustration of a wood pergola with open slats over an outdoor seating area on a stone patio beside a brick house, with oak trees
Illustration

Pergolas in Frisco

Frisco sits on State Highway 289 and Farm Road 720 about 30 miles north of Dallas, mostly in Collin County with a part in Denton County, and Census estimates show about 237,000 residents. Most of its houses were built in the last 25 years on subdivision lots with an HOA, many with an alley behind and a pool taking up much of the backyard. On a Frisco lot the pergola question usually comes down to three things: whether it attaches to the house, whether the roof is open or solid, and how close it can get to the back fence.

Who builds pergolas in Frisco?

Snow Roofing & Exteriors does. Here are the facts you can check before you call anyone:

  • 75 years as a family roofing and exterior business, and 30 years in the trade for owner Blake Snow.
  • 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome.
  • Snow Roofing & Exteriors is BBB A+ rated, fully insured, with references available on request.
  • Our own crews, who frame, roof, trim and finish pergolas, arbors and patio covers from start to finish.
  • One company for the whole outside of the house: roofs, gutters, siding, windows, soffit and fascia, paint, and outdoor living.
  • A workmanship warranty from 10 years up to lifetime, depending on the job, in writing.

Pergola, patio cover or pavilion: which one fits

People in Frisco use these words loosely, and the city treats them differently, so it helps to pin down what you actually want before anything is drawn:

StructureWhat it doesWhat to watch
Open pergolaBeams and rafters with open slats overhead. Filtered shade, and a frame for fans, lights or climbing plants.It doesn't keep rain off. Slat spacing and direction decide how much shade you get at 5 p.m. in July.
Attached patio coverA solid roof off the back of the house over a patio or outdoor kitchen.The tie-in to the house roof or wall is the most common leak spot, and the city treats it as part of the house.
Freestanding pavilionA solid roof on its own posts, often over a kitchen, a fireplace or a seating area by the pool.Footings, wind bracing and setbacks from property lines, the house and the pool.
Louvered roofA manufactured aluminum roof with blades that open for light or close against rain.Water drains through the beams and posts, so the drainage has to be planned. We'll lay it out next to a solid roof on cost, hail and upkeep.

Many backyards end up with a mix: a solid cover over the kitchen and an open pergola over the seating, built to look like one design.

Every pergola in Frisco needs a permit

Frisco's residential code amendments (Ordinance 2026-01-10, passed January 6, 2026) define accessory structures to include patio covers, arbors, gazebos, cabanas, outdoor kitchens and trellises, and say a permit is required for all accessory structures. The city's Building Inspections FAQ says the same: no size exemption, and the structure has to meet the setbacks and zoning for your lot.

Open arbor or solid roof: why it matters in Frisco

Frisco's zoning ordinance (Subsection 4.06) lists patio covers and arbors attached to the house in its accessory structure chart with three conditions: open on all sides, a permeable roof (one that isn't weather-tight) and no more than one story. A classic open-slat pergola fits that description. A solid, weather-tight roof attached to the house is a different review, closer to an addition, and we confirm with the city how yours will be treated before we draw it. That one decision changes the setbacks, the drawings and sometimes the HOA submission.

Where it can go on a Frisco lot

  • Never in an easement, never in the side yard setback between the front and rear setback lines, and never forward of the face of the house.
  • On a lot with no alley or open space behind it, the rear setback is at least 10 feet.
  • On an alley lot, a structure 8 feet tall or less can sit 3 feet from the rear line if a solid fence or wall of the same height screens it. Most pergolas are taller than 8 feet, so on alley lots we usually design to the standard setback instead.
  • A freestanding structure closer than 10 feet to the house takes the house's own rear setback.

Frisco's facade rule (Section 4.06.05) says accessory structures use the same exterior materials as the house, with fiber cement allowed for masonry at 200 square feet or less and metal or wood only at 120 square feet or less. The rule is written for walls. A pergola has posts, not walls, so we confirm with Building Inspections how it reads for your design; wrapping post bases in the house's stone or brick is one way owners tie a large pergola to the house either way.

What the City of Frisco wants on the plans

Frisco's residential submittal requirements (February 2026) put arbors, patio covers and gazebos under an online "Other Home Improvements" permit:

  • Your survey with the structure marked and the distance to every property line.
  • Framing drawings with a front and side elevation, the material list, post and beam sizes, and a footing detail.
  • If it attaches to the house: the bracket type, the bolt size and length, and what it bolts into.
  • Aluminum, steel or vinyl structures have to be engineered. That includes most manufactured louvered roofs.
  • A structure carrying solar panels follows the patio cover requirements plus the solar submittal.

The city's consolidated fee schedule (effective October 1, 2026) lists an arbor or patio cover permit at $75 plus $0.59 per square foot, up to $550. Those are city fees, not our price. Many Frisco subdivisions need HOA approval too, and the city reminds owners to get it; we send the HOA package and the permit together so neither one holds up the other.

What Frisco's code means for the build

  • The city's design table sets 105 mph wind (3-second gust) and "very heavy" termite risk. Posts sit on raised bases above the concrete, and the frame is tied together with structural connectors drawn for the wind.
  • A covered roof has to be at least Class C fire-rated, and wood shakes are prohibited as a roof covering in Frisco, so a "rustic" cover gets its look from the framing and the stain, not a cedar-shake roof.
  • Gas or electric for fans, heaters and lights is roughed in by the right trade under its own permit before the ceiling closes up.

What makes a pergola last in North Texas

  • Footings sized for clay soil. North Texas clay swells and shrinks with the weather. Posts sit on concrete piers or footings drawn for the structure, not on pavers or a thin patio edge.
  • Connections that hold against wind. A pergola is a big frame that catches gusts from every side. Beams, rafters and posts are tied together with structural connectors and bracing so the frame can't rack or lift.
  • Wood kept off the concrete. Post bases hold the wood up off the slab so it doesn't wick water and rot at the bottom, the first place an old cedar pergola fails.
  • The right material for the look. Cedar takes stain beautifully but needs resealing. Painted wood has to be primed on every face. Steel and aluminum frames cost more up front and need far less upkeep.
  • Shade aimed at the afternoon sun. We set the rafter and slat direction for where the sun is at the hours you'll actually use the space, which in most backyards means the west side.
  • Power planned in. Fans, lights, heaters and outlets are roughed in by the right trade, under their own permits, before the ceiling or slats close it up.

Why a roofing company should build the covered part

An open pergola is carpentry. A covered one is a roof, and most patio cover problems are roof problems:

  • The tie-in. Where a cover meets the house, we flash it into the roof or the wall with metal, and we fasten the ledger to the house framing, not to brick or stone veneer. Caulk alone is how most patio covers start leaking.
  • Pitch and material. Shingles need at least a 2:12 pitch under the residential code, and clay or concrete tile needs more. When a cover is too flat for the house's roofing, standing seam in a matching color is usually the cleanest answer. We form it on our own roll formers in 24 or 26 gauge, and metal lead time is typically 1 to 2 weeks.
  • Water off the patio. Gutters and downspouts sized for the cover and tied into the house's drainage, so the cover doesn't dump water onto the patio or against the foundation.
  • Matching the house. On tile, slate, shake-look or designer shingle houses, the cover should look like it came with the house. See patio covers that match tile with standing seam.

Hail around Frisco

NOAA's Storm Events Database lists 69 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Frisco from 2016 through the September 2026 update, one of the highest counts of any town we serve. The largest was 4.5-inch hail near Allen on March 24, 2019. On June 11, 2023, 3.5-inch hail fell near Carney, about two miles from Frisco, and this year the list includes 2-inch hail near Carney on June 2, 2026, about three and a half miles away.

An open pergola lets hail through; a covered one takes the same hail as the main roof. We build covers with the same underlayment, flashing and edge metal, in impact-rated shingles or standing seam where they match the house.

How a pergola job runs with us

  1. Site visit. We look at the back of the house, the roofline, the sun, the pool and the property lines, and talk about how you'll use the space.
  2. Design. We can bring in an architect to spec a new build, or build to plans you already have.
  3. Written scope. Size, height, materials, finish, roof type if it's covered, footings, gutters, fans and lights, in writing, with no surprises later.
  4. Approvals. Your HOA's approval first, then the permit with the City of Frisco. We prepare the site plan and the drawings, including the engineering the city asks for.
  5. Build. Our own crews build it from start to finish, with the electrician scheduled around the framing.
  6. Inspections and walk-through. We call for the inspections, walk the finished structure with you and give you the workmanship warranty in writing.

More for Frisco homeowners

Planning the whole backyard? See outdoor kitchens in Frisco and pool houses in Frisco. For the house itself: standing seam, tile roofing, slate roofing, siding, exterior painting and our Frisco roofing page.

Free in-home estimate: call (817) 733-9228 or use the estimate form below. We'll look at the whole outside of the house, tell you what the city and your HOA will want, and put the scope and price in writing.

We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers.

Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.

Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.

Request a free inspection or call (817) 733-9228. Small repairs are welcome too.

Stained-wood covered patio with cedar posts on stone column bases, attached to a two-story brick home
Stained-wood covered patio our crew built, tied into a two-story brick home
Standing seam metal roof seen from a backyard pool and spa
Standing seam over a pool and spa
Standing seam metal roof seen across a backyard pool on a brick ranch home
Standing seam seen across a backyard pool
Green standing seam metal roof and trim over the porch of a log-look siding home
Standing seam and trim over a porch
Detail of a shake-to-standing-seam metal transition
Where a shake roof meets standing seam
Gray standing seam metal roof panels running up to the ridge, with painted vent stacks
Standing seam panels and painted vents to the ridge

Frequently asked questions

Who builds pergolas in Frisco, TX?

Snow Roofing & Exteriors designs and builds pergolas, arbors and patio covers in Frisco, open or covered, with roofs matched to the house and tied in by roofers. It's a family roofing and exterior business going back 75 years, owner Blake Snow has 30 years in the trade, and it's BBB A+ rated, with 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. Our Rhome-area team is about 45 road miles (roughly 68 minutes) away. Call (817) 733-9228.

Do I need a permit for a pergola in Frisco?

Yes, at any size. Frisco’s code says a permit is required for all accessory structures, and it lists patio covers, arbors, gazebos and trellises among them. We file it online as an “Other Home Improvements” permit.

How much is a pergola permit in Frisco?

The city’s fee schedule, effective October 1, 2026, lists an arbor or patio cover at $75 plus $0.59 per square foot, up to $550. That’s a city fee, not our price.

How close to my back fence can a pergola be in Frisco?

On a lot with no alley or open space behind it, at least 10 feet. On an alley lot, a structure 8 feet tall or less can be 3 feet from the rear line if a solid fence or wall of the same height screens it. A structure within 10 feet of the house uses the house’s rear setback.

Can a pergola attached to my house have a solid roof in Frisco?

Frisco’s chart lists attached patio covers and arbors as open on all sides with a permeable roof. A solid, weather-tight roof is reviewed differently, so we confirm with the city how yours will be treated before we draw it.

Does an aluminum or louvered pergola need engineering in Frisco?

Yes. Frisco’s submittal requirements say aluminum, steel or vinyl structures have to be engineered. We include the engineering with the permit drawings.

Can I put a cedar shake roof on a patio cover in Frisco?

No. Frisco’s amended code prohibits wood shakes as a roof covering, and every roof covering must be at least Class C fire-rated. We match the house with shingles, tile-look products or standing seam instead.

How big has hail been around Frisco?

NOAA lists 69 reports of golf-ball-size or larger hail within about 10 miles of Frisco since 2016, including 4.5-inch hail near Allen in 2019 and 2-inch hail near Carney on June 2, 2026.

Do I need my own architect or plans for a pergola in Frisco?

No, but you can use them. We can bring in an architect to spec a new build, or build to plans you already have. Our own crews do the building from start to finish.

Cedar, painted wood, steel or aluminum: which is best?

It depends on the look and how much upkeep you want. Cedar takes stain well but needs resealing every few years. Painted wood needs good priming on every face. Steel and aluminum cost more up front and need very little upkeep. We price the options side by side.

Can you put a solid roof on a pergola later?

Sometimes, if the posts, beams and footings were sized for a roof from the start. If you think you might want a roof later, tell us at design so we can build the frame for it now.

What warranty comes with a pergola or patio cover?

Our workmanship warranty is from 10 years up to lifetime, depending on the job, in writing, plus the manufacturers’ warranties on the roofing and any manufactured components.

Get a free estimate

Tell us how to reach you. Blake or the team will call you back.

Or call (817) 733-9228