Justin Class 4 shingles: why they fit here
Justin sits where Farm Roads 156 and 407 cross in southwestern Denton County. The Handbook of Texas records a short-lived French Icarian colony here in 1848, a town that began with the sale of lots in 1883, and a name taken from Justin Sherman, chief engineer of the Santa Fe line. It incorporated in 1947 and spent most of the 1900s as a wheat and dairy town. Then the commuters came: Census estimates show Justin growing from 4,399 residents in 2020 to about 7,285 in 2025, roughly 66 percent in five years. Most of those new homes went up with builder-grade shingles, and many have already taken their first big hail.
NOAA's Storm Events Database lists 41 reports of hail 1.75 inches (golf-ball size) or larger within about 10 miles of Justin from 2016 through the September 2026 update. The storm that changed a lot of Justin roofs was April 1, 2024:
- 3-inch hail less than a mile from the center of Justin, 1.75-inch hail about a mile away, 2.5-inch hail about three miles east, and 3.4-inch hail at Justin about three miles south, all the same afternoon.
- May 10, 2021: 4-inch hail near Ponder about six miles north.
- June 11, 2023: 3-inch hail near Smoots about six miles east.
- March 14, 2024: 3-inch hail near the Roanoke-area airport about seven miles southeast.
- More recently, 1.75-inch hail near Justin on June 2, 2024, 1-inch hail in Justin on April 23, 2025, and 1.75-inch hail near Rhome on November 24, 2025.
Three-inch hail can damage any shingle, Class 4 included, so we never sell the rating as hail-proof. A Class 4 roof rides out the more common golf-ball storms with fewer claims, and many insurers credit it.
Wind: shingles torn off near 114 and 156
NOAA lists an EF-1 tornado on April 30, 2019 that formed in pasture about 1.2 miles east-southeast of Justin with winds estimated at 85 to 90 mph, and on May 28, 2024, multiple homes with shingles torn off in a neighborhood near Highway 114 and Highway 156. Open pasture gives wind a long run at the edge of town, and young subdivision trees don't break it yet. Class 4 is an impact rating, not a wind rating, so we install the manufacturer's starter strip, nailing pattern and hip and ridge so the wind warranty applies. On a replacement we also check whether the original shingles were sealed and nailed correctly, and document it if they weren't.
Class 4 vs. Class 3 in plain English
| Class 3 | Class 4 | |
|---|---|---|
| UL 2218 test | Survived 1.75-inch steel balls | Survived 2-inch steel balls, the highest rating |
| Insurance credit in Texas | Some insurers credit it | Usually the largest credit insurers offer, when they offer one |
| Looks | Same architectural and designer styles; you can't tell from the street | |
| Our minimum | Every shingle roof we install is Class 3 or better | |
The insurance credit, honestly
Texas insurers must offer a premium credit for UL 2218 impact-rated roofs, but each company sets its own amount, and Class 4 earns the largest. We can't promise a discount; ask your insurer for their figure in writing. After a qualifying install we fill out TDI Form PC068 for you. Call your agent before you choose and ask three things: whether they credit UL 2218 roofs, the dollar amount for Class 3 and for Class 4, and whether that credit applies to your current policy form. Then compare the yearly credit with the price difference we quote you in writing. The full rules are in our Texas impact-resistant roof insurance guide.
Class 4 in the styles Justin neighborhoods approve
Class 4 doesn't mean a plain shingle. Impact-rated lines come in standard architectural profiles and in designer slate- and shake-look styles. In Justin’s newer subdivisions, a weathered wood, charcoal or driftwood architectural Class 4 matches the builder palettes; on custom homes and acreage, a shake- or slate-look designer Class 4 is a common step up. When there's an HOA, we bring the packet: manufacturer sheet, color sample, impact rating and a photo of the product installed. Our guide to the best Class 4 shingles for Texas compares the lines we install, including the Atlas StormMaster family, and our HOA compliant roof replacement guide walks through approval step by step.
Justin: no roof permit, so check your contractor
Justin is one of the few towns around here where a roof replacement doesn't need a city permit. The City's building FAQ lists roof repairs or replacements, and replacing siding, as work that doesn't require one. That makes the contractor matter more, because no city inspector checks the roof afterward:
- The contractor still has to register. The FAQ says all general contractors and subcontractors must be registered ($50), and the City's permits page says all contractors register before performing services within city limits. Ask any roofer who knocks on your door whether they are.
- Get the scope in writing: underlayment, flashings, vents, drip edge, how bad decking will be handled, and the exact Class 4 product. Ask for photos of the deck once the old roof is off. We do that on every job.
- Get the PC068. With no city inspection, the TDI Form PC068 we complete after a qualifying install is your insurer's record that an impact-rated roof went on.
- New structures still need permits. A new carport, shop or addition over 120 square feet is a permitted project, and the City says permits take 10 business days to review.
No permit doesn't mean no standard. We install every Class 4 roof to the manufacturer's instructions and the current residential code, and you get the spec and the warranty in writing.
House in Class 4, shop and barn in metal
Around Justin, a lot of properties have more than one roof: the house, plus a shop, barn, carport or covered RV pad. The house often fits a Class 4 shingle best, because it matches the neighborhood and earns the impact credit many insurers offer. The outbuildings are usually better in metal. We form R-panel and standing seam on our own roll formers in 24 or 26 gauge, offer corrugated and PBR too, and can match the colors so the place reads as one property. Metal lead time is typically 1 to 2 weeks. See barn roofing.
Installing a Class 4 roof so the rating means something
- Installed to manufacturer specs by certified installers, with the nailing pattern, starter, underlayment and hip and ridge the manufacturer requires, so the product warranty applies.
- Matching accessories: impact-rated hip and ridge where the line offers it, and metal vents and flashings that won't crack like plastic.
- Decking and ventilation checked and corrected, because a Class 4 shingle on a soft deck or over a hot attic won't live up to its label.
- TDI Form PC068 completed after a qualifying install, with the product information your insurer needs.
When Class 4 shingles aren't the best answer
On some homes another roof makes more sense, and we'll say so:
- Owners who want the longest service life: standing seam in 24 or 26 gauge from our own roll formers, with metal lead times typically 1 to 2 weeks. Compare in metal vs. Class 4 shingles.
- Tile, slate or shake already on the house: matching it, or moving to synthetic slate or shake, may suit the house and HOA better.
- No insurance credit from your company: a Class 3 shingle (our minimum on every roof) can be the smarter buy.
Who installs Class 4 shingles in Justin?
Snow Roofing & Exteriors does. Facts you can check:
- 75 years as a family roofing business, and 30 years in the trade for owner Blake Snow.
- Over $80 million in completed roofing projects. 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. BBB A+ rated, fully insured, references available on request.
- Every shingle roof we install is Class 3 or better, with a workmanship warranty from 10 years up to lifetime, depending on the job.
- Our own crew, about 7 road miles (roughly 11 minutes) from Justin with our Rhome-area team. Every inspection comes with a free digital photo report, so you see what we see.
We're certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers. After a storm, see storm damage and roof replacement in Justin. More in Justin: our Justin roofing page, metal roofing in Justin, barn roofing in Justin and metal roofs for Justin acreage and ranch homes. Nearby: Argyle, Krum and Rhome.
More Class 4 pages in Denton County: Shady Shores, Krum, Justin, Sanger, Denton, Corinth, Lake Dallas, Hickory Creek, Argyle, Flower Mound and The Colony.
Product names, ratings and features are as published by the manufacturer and can change. We confirm the current rating and warranty of the exact product before we order it.
Residential warranty: a workmanship warranty from 10 years up to lifetime, depending on the job, with manufacturer warranties up to lifetime. Manufacturer coverage depends on the product and brand, and on the project qualifying for that manufacturer's program. We put the exact warranty for your roof in writing.
Certified, with 30 years installing every major roofing brand, a family roofing business going back 75 years, and over $80 million in completed roofing projects. 5.0 stars on Google at all three of our offices.
Request a free inspection or call (817) 733-9228. Small repairs are welcome too.








