A lot of the Frisco commercial roofs we look at aren’t failed roofs. They’re aging TPO, modified bitumen or metal roofs with tired seams, leaking penetrations and a surface that’s cooked by the sun. That’s exactly where a fluid-applied restoration system can buy a building another long stretch of life for a lot less disruption than a tear-off.
American WeatherStar is one of the coating makers we have hands-on experience with. Its system names (Ure-A-Sil, Envir-O-Sil, Ure-A-Max, Max-Ply, Met-A-Sil) show up in bids all over North Texas, and most owners have no idea what the difference is. I’m Blake Snow. I’ve been roofing for 30 years, and here’s how those systems compare, straight from the maker’s own pages.
Who American WeatherStar is
American WeatherStar makes fluid-applied roof restoration systems for commercial roofs. It says it has served the commercial roofing industry since 2004. Its corporate headquarters and plant are in Irvington, Alabama, where it held a ribbon-cutting on September 7, 2023 for a new 10,500 sq ft facility to blend silicone, urethane and acrylic coatings, with more than 500 Approved Contractors nationwide at the time. It’s a manufacturer member of the Roof Coatings Manufacturers Association.
Flat and low-slope systems compared
| System | Base coat | Top coat | Detail sealant | Substrates listed | System life |
|---|---|---|---|---|---|
| Ure-A-Sil | Aromatic Urethane 520 | High-Solids Silicone 412 | Urethane Brush-Grade 522 | Mod bit, smooth BUR, EPDM, TPO, PVC, structural concrete, SPF | 20-year StarGard |
| Envir-O-Sil | High-Solids Silicone 412 | High-Solids Silicone 412 | Terminator 622 | Mod bit, BUR, EPDM, TPO, PVC, concrete, SPF | 20-year |
| Ure-A-Max | Aromatic Urethane 520 | Aliphatic Urethane 510 | Urethane Brush-Grade 522 | SPF, mod bit, BUR, TPO, PVC, EPDM, concrete | 20-year StarGard |
| Max-Ply | Base coat with polyester fabric embedded across the whole roof | Saturation coat + protective top coat | (full fabric) | Mod bit, BUR, TPO, PVC, EPDM, concrete | 20-year |
Every system starts the same way: pressure washing plus EcoCleaner 925. Envir-O-Sil adds Acrylic Bonding Primer 905 on asphaltic or previously coated roofs. American WeatherStar also lists “Eco” versions of Ure-A-Sil and Ure-A-Max.
How I’d choose between them
- Envir-O-Sil (all silicone) is the straightforward pick for a sound roof that holds water in spots. American WeatherStar says it’s warrantied to withstand ponding water areas, and it lists Miami-Dade, Florida Product Approval, FM Approved and UL Classified among its approvals.
- Ure-A-Sil (urethane base, silicone top) puts a tough urethane layer under the silicone. That’s the one I lean toward on roofs that see foot traffic to rooftop units, or where we want extra toughness under a silicone finish.
- Ure-A-Max (all urethane) is about durability and chemical resistance. Think restaurant exhaust, grease and rooftop equipment areas.
- Max-Ply (fully reinforced) embeds polyester fabric across the entire roof, not just at the seams. It’s for roofs with lots of surface cracking or alligatoring where we want reinforcement everywhere. Note that its substrate list doesn’t include spray foam.
One thing all silicone-topped systems share: future recoats and repairs are going to be silicone. Plan for that over the life of the building.
Metal roof systems
For metal warehouses, shops and retail canopies, American WeatherStar’s metal restoration line includes Met-A-Sil, Met-A-Gard+, Met-A-Gard and Color-Gard. Two to know:
- Met-A-Sil: a 20-year high-solids silicone system. Optional Red Oxide Rust Prime 912 for light to moderate rust, Silicone Brush-Grade 422 or Urethane Brush-Grade 522 on fasteners, seams and penetrations, then a base and top coat of High-Solids Silicone 412.
- Met-A-Gard+: a 20-year system built on multiple layers of High-Tensile Acrylic 211 over Urethane Brush-Grade 522 details, with the same optional rust primer. American WeatherStar highlights color retention and elongation.
American WeatherStar’s own FAQ makes the point we make on every metal job: fasteners get inspected, and loose or deteriorated ones get tightened or replaced before the coating goes on. Coating over a loose screw just paints the leak.
If your metal building is past saving, we also run our own roll formers for R-panel and standing seam in 24 or 26 gauge, with typical lead times of 1 to 2 weeks.
Restore or replace? What the maker itself says
American WeatherStar’s guidance lines up with ours. Restoration makes sense when the roof is structurally sound, moisture damage is limited, and the surface can take a fluid-applied system. Replacement is usually the call when there’s widespread trapped moisture, wet insulation, deck damage, failed repairs, drainage that can’t be corrected, or more roof layers than code or the system allows.
That’s why we don’t quote a coating off a satellite photo. We walk the roof, check moisture, do adhesion tests on the actual surface, and mark every soft or wet area that has to be cut out and replaced before coating.
The StarGard warranty: read this before you sign
American WeatherStar is clear about how its warranties work:
- Only jobs installed by an American WeatherStar Approved Contractor are eligible for a StarGard warranty.
- Each job still goes through warranty review and approval, looking at roof condition and substrate, proper application and compliance with the specification. Extensive damage or an incompatible surface can disqualify a job.
- American WeatherStar recommends owners verify the contractor’s status and ask for a sample of the warranty before work starts.
Snow Roofing and Exteriors is an American WeatherStar Approved Contractor and can offer StarGard warranty projects. Each job is still subject to WeatherStar’s job-by-job warranty review.
The system pages also say long-term material and NDL system warranties are available. Whatever coating brand you choose, get the warranty type, length, coverage limits and who issues it in writing before the job starts. We put that on every coating quote, along with our own workmanship warranty, and commercial jobs can carry 10- and 20-year NDL warranties depending on the system.
Frisco hail and coated roofs
Big hail falls right next door. NOAA’s Storm Prediction Center logged egg-size (2-inch) hail near Lebanon Rd, 2 miles north-northeast of The Colony, on June 2, 2026, at the edge of Frisco. A coating is a waterproofing and reflectivity system, not hail armor. After a storm, have the roof checked and documented, and remember Texas claims generally have to be filed within 1 year from the date of loss. Check your policy. See our guide to commercial roof hail claims.
Comparing coating brands? See our posts on Tropical Roofing Products (now SOPREMA) coatings and APOC coatings on residential flat sections, or compare TPO vs. modified bitumen vs. coating.
What goes on our restoration quotes
- Existing roof type, age and number of layers
- Moisture survey results and the wet areas to be replaced (marked on a roof plan)
- Adhesion test results and primer, if needed
- System name, every product in it, and coats or mil thickness per the maker’s spec
- Seam, penetration, drain and fastener work listed line by line
- Manufacturer warranty type and length in writing, plus our workmanship warranty
- Free digital photo report
Talk to us about your Frisco commercial roof
We restore and replace commercial roofs in Frisco, The Colony, Little Elm, Prosper and Plano. Snow Roofing and Exteriors is an American WeatherStar Approved Contractor. We’re certified with GAF, CertainTeed, Owens Corning, Atlas, Johns Manville, Carlisle, Tropical Roofing Products, Mule-Hide and Enviroshake, and many other roof manufacturers, and every roof is installed to manufacturer specs by certified installers. We’re BBB A+ rated, with 5.0 stars on Google at all three offices: Bridgeport, Decatur and Rhome. Request a free roof evaluation or call (817) 733-9228.
Sources
- American WeatherStar: About
- American WeatherStar: Ribbon-cutting for new manufacturing facility (2023)
- American WeatherStar: Flat roof restoration systems, Ure-A-Sil, Envir-O-Sil, Ure-A-Max, Max-Ply
- American WeatherStar: Metal roof restoration, Met-A-Sil, Met-A-Gard+
- American WeatherStar: What is an Approved Contractor and why it matters
- American WeatherStar: Roof restoration vs. replacement
- Roof Coatings Manufacturers Association: American WeatherStar member listing
- NOAA Storm Prediction Center: storm reports, June 2, 2026

